I can add the PC to the Domain, but when I try to add the Domain user to the
local admin group of that pc I can't do it.
I don't even get the option to select from the "DOMAIN" that I need to
select the user from. I only get the option to select from that local PC.
Another thing when the user logs onto the PC, the login script doesn't run
and we get an error.
I'm wondering if its a DNS issue as this is an issue at a remote office that
we just hooked up and they are connected back to the main office through a
VPN Tunnel.
Any suggestions or ideas?

Hello Dtown,

Please describe in detail your setup and post an unedited ipconfig /all from
the client.

Best regards

Meinolf Weber
Disclaimer: This posting is provided "AS IS" with no warranties, and confers
no rights.
** Please do NOT email, only reply to Newsgroups
** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm

> I can add the PC to the Domain, but when I try to add the Domain user
> to the
> local admin group of that pc I can't do it.
> I don't even get the option to select from the "DOMAIN" that I need to
> select the user from. I only get the option to select from that local
> PC.
> Another thing when the user logs onto the PC, the login script doesn't
> run
> and we get an error.
> I'm wondering if its a DNS issue as this is an issue at a remote
> office that
> we just hooked up and they are connected back to the main office
> through a
> VPN Tunnel.
> Any suggestions or ideas?

Are setup is as follows.
We have the remote office connecting to the Internet through a 3mbps
bidirectional connection. We are then usign this internet connection to
leverage a VPN tunnell back to the corporate office through a CISCO router
and then that CISCO Router connects to the CISCO router at the office. For
example, now the users only have to dial a 4 digit ext to talk with folks
back at corporate, where as they used to have to do the full 10 digit dialing.

I will make a nother post with the other information.

"Meinolf Weber" wrote:

> Hello Dtown,
>
> Please describe in detail your setup and post an unedited ipconfig /all from
> the client.
>
> Best regards
>
> Meinolf Weber
> Disclaimer: This posting is provided "AS IS" with no warranties, and confers
> no rights.
> ** Please do NOT email, only reply to Newsgroups
> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
>
> > I can add the PC to the Domain, but when I try to add the Domain user
> > to the
> > local admin group of that pc I can't do it.
> > I don't even get the option to select from the "DOMAIN" that I need to
> > select the user from. I only get the option to select from that local
> > PC.
> > Another thing when the user logs onto the PC, the login script doesn't
> > run
> > and we get an error.
> > I'm wondering if its a DNS issue as this is an issue at a remote
> > office that
> > we just hooked up and they are connected back to the main office
> > through a
> > VPN Tunnel.
> > Any suggestions or ideas?
>
>
>

Error in Event Logs:

Event Type: Error
Event Source: NETLOGON
Event Category: None
Event ID: 5719
Date: 5/19/2008
Time: 8:01:13 AM
User: N/A
Computer: DELTA2UA4290206
Description:
No Domain Controller is available for domain DELTAPETRO due to the following:
There are currently no logon servers available to service the logon request.
..
Make sure that the computer is connected to the network and try again. If
the problem persists, please contact your domain administrator.

For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 5e 00 00 c0 ^..À


"Meinolf Weber" wrote:

> Hello Dtown,
>
> Please describe in detail your setup and post an unedited ipconfig /all from
> the client.
>
> Best regards
>
> Meinolf Weber
> Disclaimer: This posting is provided "AS IS" with no warranties, and confers
> no rights.
> ** Please do NOT email, only reply to Newsgroups
> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
>
> > I can add the PC to the Domain, but when I try to add the Domain user
> > to the
> > local admin group of that pc I can't do it.
> > I don't even get the option to select from the "DOMAIN" that I need to
> > select the user from. I only get the option to select from that local
> > PC.
> > Another thing when the user logs onto the PC, the login script doesn't
> > run
> > and we get an error.
> > I'm wondering if its a DNS issue as this is an issue at a remote
> > office that
> > we just hooked up and they are connected back to the main office
> > through a
> > VPN Tunnel.
> > Any suggestions or ideas?
>
>
>

Warning message in Event Log:
Event Type: Warning
Event Source: LSASRV
Event Category: SPNEGO (Negotiator)
Event ID: 40961
Date: 5/19/2008
Time: 10:30:44 AM
User: N/A
Computer: DELTA2UA4290206
Description:
The Security System could not establish a secured connection with the server
DNS/ns.deltapetro.com. No authentication protocol was available.

For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.

"Meinolf Weber" wrote:

> Hello Dtown,
>
> Please describe in detail your setup and post an unedited ipconfig /all from
> the client.
>
> Best regards
>
> Meinolf Weber
> Disclaimer: This posting is provided "AS IS" with no warranties, and confers
> no rights.
> ** Please do NOT email, only reply to Newsgroups
> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
>
> > I can add the PC to the Domain, but when I try to add the Domain user
> > to the
> > local admin group of that pc I can't do it.
> > I don't even get the option to select from the "DOMAIN" that I need to
> > select the user from. I only get the option to select from that local
> > PC.
> > Another thing when the user logs onto the PC, the login script doesn't
> > run
> > and we get an error.
> > I'm wondering if its a DNS issue as this is an issue at a remote
> > office that
> > we just hooked up and they are connected back to the main office
> > through a
> > VPN Tunnel.
> > Any suggestions or ideas?
>
>
>

It was a DNS Issue.
We added the DNS's of the Main office along with the DNS of the ISP and now
it works correctly.
The reason it would join the domain is because WINS contained our DNS of the
main office and when you join a domain it looks at DNS and WINS, however the
login script does not look at WINS.

"Dtown Dawg" wrote:

> I can add the PC to the Domain, but when I try to add the Domain user to the
> local admin group of that pc I can't do it.
> I don't even get the option to select from the "DOMAIN" that I need to
> select the user from. I only get the option to select from that local PC.
> Another thing when the user logs onto the PC, the login script doesn't run
> and we get an error.
> I'm wondering if its a DNS issue as this is an issue at a remote office that
> we just hooked up and they are connected back to the main office through a
> VPN Tunnel.
> Any suggestions or ideas?