Hi

I broke my laptop screen on my TOSHIBA Satellite Pro and so bought a
new one. My original one was a cloudy screen as the new one is a tru
brite screen. Everything seems ok, except occasionally I get a blue
screen and my laptop restarts. I've run the TOSHIBA PC DIagnostics
and everything passes. Has anyone any idea what I need to do to stop
this happening please, I'm assuming its due to the new screen, or is
it a memory issue or something?

Cheers

Rich

What details appear in the Blue Screen ? The data appears a little
cryptic but has information that helps to explain why the unrecoverable
fault happened.

You message is a little unclear about the LCD panel replacement. Was
the screen replaced at the Toshiba service center or are you using an
external monitor ? If you sent the notebook in for repair it's possible
you have a replacement unit with you original drive switched into it. I'd
check the S/N or Vendor codes to make sure you have the same unit.
It's possible you've received a Factory refurbished unit that may have
other issues.

"Richhall" <r.hall@orange.net> wrote in message
news:1190545003.691987.72720@d55g2000hsg.googlegro ups.com...
> Hi
>
> I broke my laptop screen on my TOSHIBA Satellite Pro and so bought a
> new one. My original one was a cloudy screen as the new one is a tru
> brite screen. Everything seems ok, except occasionally I get a blue
> screen and my laptop restarts. I've run the TOSHIBA PC DIagnostics
> and everything passes. Has anyone any idea what I need to do to stop
> this happening please, I'm assuming its due to the new screen, or is
> it a memory issue or something?
>
> Cheers
>
> Rich
>

Hi

I bought the LCD display and installed it myself. It is the following
type:

Model: Toshiba Satellite A100 seires, Satellite A105 series

Size: 15.4" WXGA 1280X800

Condition: Brand New (Never Used), Direct From Manufacture

*SMT provide the highest quality of the LCD screen in the world.

1. Zero Dead pixel for all SMT LCD screen. Others vendors may have
some Dead pixel.

2. Zero spot for all SMT LCD screen. Others vendors may have some
spots.

I have an A100 so they said it was the correct type, only difference I
could see was my new one is a clearer display. Mymanual says the
original was a TFT display. Apart from that everything in the manual
is as the one I bought.

Unfortunately, the blue screen appears and then the PC turns off
immediately and reboots, then when it comes back up I send the error
log to microsoft and they send me to a microsoft webpage. Are the
errors logged anywhere?

Cheers

Rich

I have looked in event viewer. I have a lot of errors saying CPLIB ::
General - Invalid Parameter for ati2mtag which I guess is something to
do with my display. I also have found when it bluescreend and got
this from the system log.

Error code 1000007f, parameter1 00000008, parameter2 80042000,
parameter3 00000000, parameter4 00000000.

For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.

which Microsft has as:

Product: Windows Operating System
ID: 1003
Source: System Error
Version: 5.2
Symbolic Name: ER_KRNLCRASH_LOG
Message: Error code %1, parameter1 %2, parameter2 %3, parameter3 %4,
parameter4 %5.

Explanation
A blue screen (Stop error) was reported. The message contains details
about the error. A matching event with Event ID 1001 might also appear
in the event log. This matching event displays information about the
specific error that occurred.


User Action
No user action is required.

Cheers

Rich

Disable automatic restart on system failure. This should help by
allowing time to write down the STOP code properly. Right click on
the My Computer icon on the Desktop and select Properties, Advanced,
Start-Up and Recovery, System Failure and uncheck box before
Automatically Restart.

Do not re-enable automatic restart on system failure even after you have
solved the problem as it's better disabled. Check for variants of the
Stop Error message.

An alternative is to keep pressing the F8 key during Start-Up and select
option - Disable automatic restart on system failure.

If you are using a wireless keyboard and the F8 key does not work
substitute a wired keyboard and mouse for this exercise only.

What Error / Warning reports ( if any ) appear in the System log in
Event Viewer when you last booted the machine?

Please post copies of all Error and Warning Reports appearing in
the System and Application logs in Event Viewer for the last boot. No
Information Reports or Duplicates please. Indicate which also appear in
a previous boot.

You can access Event Viewer by selecting Start, Control Panel,
Administrative Tools, and Event Viewer. When researching the meaning
of the error, information regarding Event ID, Source and Description
are important.

HOW TO: View and Manage Event Logs in Event Viewer in Windows XP
http://support.microsoft.com/kb/308427/en-us

Part of the Description of the error will include a link, which you
should double click for further information. You can copy using copy
and paste. Often the link will, however, say there is no further
information.
http://go.microsoft.com/fw.link/events.asp
(Please note the hyperlink above is for illustration purposes only)

A tip for posting copies of Error Reports! Run Event Viewer and double
click on the error you want to copy. In the window, which appears is a
button resembling two pages. Click the button and close Event
Viewer.Now start your message (email) and do a paste into the body of
the message. Make sure this is the first paste after exiting from
Event Viewer.


--



Hope this helps.

Gerry
~~~~
FCA
Stourport, England
Enquire, plan and execute
~~~~~~~~~~~~~~~~~~~
Richhall wrote:
> Hi
>
> I bought the LCD display and installed it myself. It is the following
> type:
>
> Model: Toshiba Satellite A100 seires, Satellite A105 series
>
> Size: 15.4" WXGA 1280X800
>
> Condition: Brand New (Never Used), Direct From Manufacture
>
> *SMT provide the highest quality of the LCD screen in the world.
>
> 1. Zero Dead pixel for all SMT LCD screen. Others vendors may have
> some Dead pixel.
>
> 2. Zero spot for all SMT LCD screen. Others vendors may have some
> spots.
>
> I have an A100 so they said it was the correct type, only difference I
> could see was my new one is a clearer display. Mymanual says the
> original was a TFT display. Apart from that everything in the manual
> is as the one I bought.
>
> Unfortunately, the blue screen appears and then the PC turns off
> immediately and reboots, then when it comes back up I send the error
> log to microsoft and they send me to a microsoft webpage. Are the
> errors logged anywhere?
>
> Cheers
>
> Rich

Hi, Details from this morning from event viewer leading up to restart:

**************************************************


Event Type: Error
Event Source: W32Time
Event Category: None
Event ID: 29
Date: 23/09/2007
Time: 11:45:52
User: N/A
Computer: RICH-LAPTOP
Description:
The time provider NtpClient is configured to acquire time from one or
more time sources, however none of the sources are currently
accessible. No attempt to contact a source will be made for 14
minutes. NtpClient has no source of accurate time.

For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.

**************************************************

Event Type: Error
Event Source: W32Time
Event Category: None
Event ID: 17
Date: 23/09/2007
Time: 11:45:52
User: N/A
Computer: RICH-LAPTOP
Description:
Time Provider NtpClient: An error occurred during DNS lookup of the
manually configured peer 'time.windows.com,0x1'. NtpClient will try
the DNS lookup again in 15 minutes. The error was: Catastrophic
failure (0x8000FFFF)

For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.

****************************************

Event Type: Error
Event Source: Service Control Manager
Event Category: None
Event ID: 7000
Date: 23/09/2007
Time: 11:45:54
User: N/A
Computer: RICH-LAPTOP
Description:
The CT Device Query service service failed to start due to the
following error:
The system cannot find the file specified.

For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.

**************************************************
Event Type: Error
Event Source: Service Control Manager
Event Category: None
Event ID: 7000
Date: 23/09/2007
Time: 11:45:54
User: N/A
Computer: RICH-LAPTOP
Description:
The Creative Service for CDROM Access service failed to start due to
the following error:
The system cannot find the file specified.

For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.

**************************************************

Event Type: Error
Event Source: Server
Event Category: None
Event ID: 2505
Date: 23/09/2007
Time: 11:46:07
User: N/A
Computer: RICH-LAPTOP
Description:
The server could not bind to the transport \Device
\NetBT_Tcpip_{8C0AA1CA-B275-4F27-A8D5-49B7EECDAF74} because another
computer on the network has the same name. The server could not
start.

For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 34 00 00 00 4...

*************************************************
Event Type: Error
Event Source: ipnathlp
Event Category: None
Event ID: 30013
Date: 23/09/2007
Time: 11:46:21
User: N/A
Computer: RICH-LAPTOP
Description:
The DHCP allocator has disabled itself on IP address 192.168.1.54,
since the IP address is outside the 192.168.0.0/255.255.255.0 scope
from which addresses are being allocated to DHCP clients. To enable
the DHCP allocator on this IP address, please change the scope to
include the IP address, or change the IP address to fall within the
scope.

For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.

*************************************************

Event Type: Error
Event Source: System Error
Event Category: (102)
Event ID: 1003
Date: 23/09/2007
Time: 11:46:46
User: N/A
Computer: RICH-LAPTOP
Description:
Error code 1000000a, parameter1 83740cb4, parameter2 000000ff,
parameter3 00000000, parameter4 80531b92.

For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 53 79 73 74 65 6d 20 45 System E
0008: 72 72 6f 72 20 20 45 72 rror Er
0010: 72 6f 72 20 63 6f 64 65 ror code
0018: 20 31 30 30 30 30 30 30 1000000
0020: 61 20 20 50 61 72 61 6d a Param
0028: 65 74 65 72 73 20 38 33 eters 83
0030: 37 34 30 63 62 34 2c 20 740cb4,
0038: 30 30 30 30 30 30 66 66 000000ff
0040: 2c 20 30 30 30 30 30 30 , 000000
0048: 30 30 2c 20 38 30 35 33 00, 8053
0050: 31 62 39 32 1b92

*************************************************
There is then nothing until 20 minutes later.

Cheers

Rich

http://msdn2.microsoft.com/en-us/library/ms795478.aspx

My inclination would be to take the laptop to a Toshiba service centre.
There's a mismatch somewhere. How old is the Toshiba?


--



Hope this helps.

Gerry
~~~~
FCA
Stourport, England
Enquire, plan and execute
~~~~~~~~~~~~~~~~~~~



Richhall wrote:
> I have looked in event viewer. I have a lot of errors saying CPLIB ::
> General - Invalid Parameter for ati2mtag which I guess is something to
> do with my display. I also have found when it bluescreend and got
> this from the system log.
>
> Error code 1000007f, parameter1 00000008, parameter2 80042000,
> parameter3 00000000, parameter4 00000000.
>
> For more information, see Help and Support Center at
> http://go.microsoft.com/fwlink/events.asp.
>
> which Microsft has as:
>
> Product: Windows Operating System
> ID: 1003
> Source: System Error
> Version: 5.2
> Symbolic Name: ER_KRNLCRASH_LOG
> Message: Error code %1, parameter1 %2, parameter2 %3, parameter3 %4,
> parameter4 %5.
>
> Explanation
> A blue screen (Stop error) was reported. The message contains details
> about the error. A matching event with Event ID 1001 might also appear
> in the event log. This matching event displays information about the
> specific error that occurred.
>
>
> User Action
> No user action is required.
>
> Cheers
>
> Rich

It is only 1 year old, if that.

Thanks for your help.If it happens again (which I'm sure it will!)
I'll get the details as I've disabled the auto restart. Cleaned up my
hard disk etc as well just in case.

Rich

Rich

I don't think any of these reports save the last relate to your number 1
issue.

Event ID: 29
Common and inconsequential.

Event ID: 17
Linked to Event ID:29

Event ID: 7000 CT Device Query service
More interesting. Image scanning. Are you a Dentist or something like
that using specialist software? What is the status of the software?
Still installed or uninstalled?

Event ID: 7000 Creative Service for CDROM
Could be connected with the previous error. Leaves me wondering whether
you have uninstalled something leaving remnants causing start up
processes not able to complete?

Event ID: 2505
A search of the Registry to identify the application represented by this
guid 8C0AA1CA-B275-4F27-A8D5-49B7EECDAF74 would be my starting point.

Event ID: 30013
An internet connection issue probably a consequence of Event ID: 2505.

Event ID: 1003
A BSOD error probably part of your number 1 issue.
http://msdn2.microsoft.com/en-us/library/ms793589.aspx


--



Hope this helps.

Gerry
~~~~
FCA
Stourport, England
Enquire, plan and execute
~~~~~~~~~~~~~~~~~~~

Richhall wrote:
> Hi, Details from this morning from event viewer leading up to restart:
>
> **************************************************
>
>
> Event Type: Error
> Event Source: W32Time
> Event Category: None
> Event ID: 29
> Date: 23/09/2007
> Time: 11:45:52
> User: N/A
> Computer: RICH-LAPTOP
> Description:
> The time provider NtpClient is configured to acquire time from one or
> more time sources, however none of the sources are currently
> accessible. No attempt to contact a source will be made for 14
> minutes. NtpClient has no source of accurate time.
>
> For more information, see Help and Support Center at
> http://go.microsoft.com/fwlink/events.asp.
>
> **************************************************
>
> Event Type: Error
> Event Source: W32Time
> Event Category: None
> Event ID: 17
> Date: 23/09/2007
> Time: 11:45:52
> User: N/A
> Computer: RICH-LAPTOP
> Description:
> Time Provider NtpClient: An error occurred during DNS lookup of the
> manually configured peer 'time.windows.com,0x1'. NtpClient will try
> the DNS lookup again in 15 minutes. The error was: Catastrophic
> failure (0x8000FFFF)
>
> For more information, see Help and Support Center at
> http://go.microsoft.com/fwlink/events.asp.
>
> ****************************************
>
> Event Type: Error
> Event Source: Service Control Manager
> Event Category: None
> Event ID: 7000
> Date: 23/09/2007
> Time: 11:45:54
> User: N/A
> Computer: RICH-LAPTOP
> Description:
> The CT Device Query service service failed to start due to the
> following error:
> The system cannot find the file specified.
>
> For more information, see Help and Support Center at
> http://go.microsoft.com/fwlink/events.asp.
>
> **************************************************
> Event Type: Error
> Event Source: Service Control Manager
> Event Category: None
> Event ID: 7000
> Date: 23/09/2007
> Time: 11:45:54
> User: N/A
> Computer: RICH-LAPTOP
> Description:
> The Creative Service for CDROM Access service failed to start due to
> the following error:
> The system cannot find the file specified.
>
> For more information, see Help and Support Center at
> http://go.microsoft.com/fwlink/events.asp.
>
> **************************************************
>
> Event Type: Error
> Event Source: Server
> Event Category: None
> Event ID: 2505
> Date: 23/09/2007
> Time: 11:46:07
> User: N/A
> Computer: RICH-LAPTOP
> Description:
> The server could not bind to the transport \Device
> \NetBT_Tcpip_{8C0AA1CA-B275-4F27-A8D5-49B7EECDAF74} because another
> computer on the network has the same name. The server could not
> start.
>
> For more information, see Help and Support Center at
> http://go.microsoft.com/fwlink/events.asp.
> Data:
> 0000: 34 00 00 00 4...
>
> *************************************************
> Event Type: Error
> Event Source: ipnathlp
> Event Category: None
> Event ID: 30013
> Date: 23/09/2007
> Time: 11:46:21
> User: N/A
> Computer: RICH-LAPTOP
> Description:
> The DHCP allocator has disabled itself on IP address 192.168.1.54,
> since the IP address is outside the 192.168.0.0/255.255.255.0 scope
> from which addresses are being allocated to DHCP clients. To enable
> the DHCP allocator on this IP address, please change the scope to
> include the IP address, or change the IP address to fall within the
> scope.
>
> For more information, see Help and Support Center at
> http://go.microsoft.com/fwlink/events.asp.
>
> *************************************************
>
> Event Type: Error
> Event Source: System Error
> Event Category: (102)
> Event ID: 1003
> Date: 23/09/2007
> Time: 11:46:46
> User: N/A
> Computer: RICH-LAPTOP
> Description:
> Error code 1000000a, parameter1 83740cb4, parameter2 000000ff,
> parameter3 00000000, parameter4 80531b92.
>
> For more information, see Help and Support Center at
> http://go.microsoft.com/fwlink/events.asp.
> Data:
> 0000: 53 79 73 74 65 6d 20 45 System E
> 0008: 72 72 6f 72 20 20 45 72 rror Er
> 0010: 72 6f 72 20 63 6f 64 65 ror code
> 0018: 20 31 30 30 30 30 30 30 1000000
> 0020: 61 20 20 50 61 72 61 6d a Param
> 0028: 65 74 65 72 73 20 38 33 eters 83
> 0030: 37 34 30 63 62 34 2c 20 740cb4,
> 0038: 30 30 30 30 30 30 66 66 000000ff
> 0040: 2c 20 30 30 30 30 30 30 , 000000
> 0048: 30 30 2c 20 38 30 35 33 00, 8053
> 0050: 31 62 39 32 1b92
>
> *************************************************
> There is then nothing until 20 minutes later.
>
> Cheers
>
> Rich

Hi Gerry

Thanks for all your help. Its just happened again. Got the blue screen
info:

PAGE_FAULT_IN_NONPAGED_AREA

**Stop 0x0060050 (0x80926a78, 0x00000004, 0x80521EA,0x0000000)

No, Not a dentist (wish I was!) its my home computer. Think I was
just on the internet. Its happened again when I was just watching a
movie via Div X. These are the latest event viewer errors:

*****************************************
Event Type: Error
Event Source: ipnathlp
Event Category: None
Event ID: 30013
Date: 23/09/2007
Time: 21:06:35
User: N/A
Computer: RICH-LAPTOP
Description:
The DHCP allocator has disabled itself on IP address 192.168.1.54,
since the IP address is outside the 192.168.0.0/255.255.255.0 scope
from which addresses are being allocated to DHCP clients. To enable
the DHCP allocator on this IP address, please change the scope to
include the IP address, or change the IP address to fall within the
scope.

For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.

*******************************************

Event Type: Error
Event Source: Server
Event Category: None
Event ID: 2505
Date: 23/09/2007
Time: 21:06:19
User: N/A
Computer: RICH-LAPTOP
Description:
The server could not bind to the transport \Device
\NetBT_Tcpip_{8C0AA1CA-B275-4F27-A8D5-49B7EECDAF74} because another
computer on the network has the same name. The server could not
start.

For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 34 00 00 00 4...

************************************************** *******

Event Type: Error
Event Source: Service Control Manager
Event Category: None
Event ID: 7000
Date: 23/09/2007
Time: 21:06:19
User: N/A
Computer: RICH-LAPTOP
Description:
The CT Device Query service service failed to start due to the
following error:
The system cannot find the file specified.

For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.

*************************************
Event Type: Error
Event Source: Service Control Manager
Event Category: None
Event ID: 7000
Date: 23/09/2007
Time: 21:06:19
User: N/A
Computer: RICH-LAPTOP
Description:
The Creative Service for CDROM Access service failed to start due to
the following error:
The system cannot find the file specified.

For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.

*************************************

Cheers

Rich

Hi

I've searched the registry and it identifies:

Name

InterfaceList

Type

REG_SZ

and then a long name after DEVICE. What should I do with this info?
Know I shouldn't really mess with the registry,

Cheers

RIch

Rich

What software were you using to watch the video?

You should test your RAM memory
http://www.memtest.org/

http://www.elephantboycomputers.com/...ardware_Tshoot


--



Hope this helps.

Gerry
~~~~
FCA
Stourport, England
Enquire, plan and execute
~~~~~~~~~~~~~~~~~~~
..
Richhall wrote:
> Hi Gerry
>
> Thanks for all your help. Its just happened again. Got the blue screen
> info:
>
> PAGE_FAULT_IN_NONPAGED_AREA
>
> **Stop 0x0060050 (0x80926a78, 0x00000004, 0x80521EA,0x0000000)
>
> No, Not a dentist (wish I was!) its my home computer. Think I was
> just on the internet. Its happened again when I was just watching a
> movie via Div X. These are the latest event viewer errors:
>
> *****************************************
> Event Type: Error
> Event Source: ipnathlp
> Event Category: None
> Event ID: 30013
> Date: 23/09/2007
> Time: 21:06:35
> User: N/A
> Computer: RICH-LAPTOP
> Description:
> The DHCP allocator has disabled itself on IP address 192.168.1.54,
> since the IP address is outside the 192.168.0.0/255.255.255.0 scope
> from which addresses are being allocated to DHCP clients. To enable
> the DHCP allocator on this IP address, please change the scope to
> include the IP address, or change the IP address to fall within the
> scope.
>
> For more information, see Help and Support Center at
> http://go.microsoft.com/fwlink/events.asp.
>
> *******************************************
>
> Event Type: Error
> Event Source: Server
> Event Category: None
> Event ID: 2505
> Date: 23/09/2007
> Time: 21:06:19
> User: N/A
> Computer: RICH-LAPTOP
> Description:
> The server could not bind to the transport \Device
> \NetBT_Tcpip_{8C0AA1CA-B275-4F27-A8D5-49B7EECDAF74} because another
> computer on the network has the same name. The server could not
> start.
>
> For more information, see Help and Support Center at
> http://go.microsoft.com/fwlink/events.asp.
> Data:
> 0000: 34 00 00 00 4...
>
> ************************************************** *******
>
> Event Type: Error
> Event Source: Service Control Manager
> Event Category: None
> Event ID: 7000
> Date: 23/09/2007
> Time: 21:06:19
> User: N/A
> Computer: RICH-LAPTOP
> Description:
> The CT Device Query service service failed to start due to the
> following error:
> The system cannot find the file specified.
>
> For more information, see Help and Support Center at
> http://go.microsoft.com/fwlink/events.asp.
>
> *************************************
> Event Type: Error
> Event Source: Service Control Manager
> Event Category: None
> Event ID: 7000
> Date: 23/09/2007
> Time: 21:06:19
> User: N/A
> Computer: RICH-LAPTOP
> Description:
> The Creative Service for CDROM Access service failed to start due to
> the following error:
> The system cannot find the file specified.
>
> For more information, see Help and Support Center at
> http://go.microsoft.com/fwlink/events.asp.
>
> *************************************
>
> Cheers
>
> Rich

\DEVICE\{8C0AA1CA-B275-4F27-A8D5-49B7EECDAF74}\DEVICE\
{C11299FB-38E5-483C-9283-2A46D2F1BCA6}\DEVICE\{50990EDC-B7EE-43EA-AE99-
E7BE6617A5B2}

Hi Gerry

I was using DivX Player from DivX. Looking in the registry the error
was listed under EAPOL?

Cheers

Rich

Rich

Answer to your question is see what it throws up in Google. However,
it's not obvious in this case what the interface is for. However, one
error rep[ort implies that you have two computers with the same name.
What does your Network comprise? What do they connect to?

--



Hope this helps.

Gerry
~~~~
FCA
Stourport, England
Enquire, plan and execute
~~~~~~~~~~~~~~~~~~~




Richhall wrote:
> Hi
>
> I've searched the registry and it identifies:
>
> Name
>
> InterfaceList
>
> Type
>
> REG_SZ
>
> and then a long name after DEVICE. What should I do with this info?
> Know I shouldn't really mess with the registry,
>
> Cheers
>
> RIch