|
| | |||||||
| Windows XP Discuss the Microsoft Windows XP Operating System |
| | LinkBack | Thread Tools |
| |||
| Unable to setup a network Right clicking a folder on my system and selecting "Sharing and Security" from the displayed menu yields a dialog box that has no "Share this folder on the network" checkbox available. I gather from my reading, that this implies that the computer is not on a network. On the same display is the statement "As a security measure, Windows has disabled remote access to this computer. However, you can enable remote access and safely share files by running the 'Network Setup Wizard'". I've run the 'Network Setup Wizard', and it fails to establish a network, as evidenced by the fact that again selecting "Sharing and Security" yields the same screen as described above, with no changes. I'm running Win'XP Home on two machines. I have firewalls disabled on both machines. I'm successfully pinging each PC one from the other. What do I do? How do I create a network? I am trying to set it up so that I can share folders on one machine with another. Don J -------------------------------------------------------------------------- |
| |||
| Re: Unable to setup a network "Don J" <dej8801@comcast.net> wrote in message news:AYadnTg428ahzM7bnZ2dnUVZ_i2dnZ2d@comcast.com > Right clicking a folder on my system and selecting "Sharing and > Security" from the displayed menu yields a dialog box that has no > "Share this folder on the network" checkbox available. I gather from > my reading, that this implies that the computer is not on a network. Nope, it doesn't mean it isn't on a network. It means it isn't shared on the network. > On the same display is the statement "As a security measure, Windows > has disabled remote access to this computer. However, you can enable > remote access and safely share files by running the 'Network Setup > Wizard'". I've run the 'Network Setup Wizard', and it fails to > establish a network, as evidenced by the fact that again selecting > "Sharing and Security" yields the same screen as described above, > with no changes. Remote Access is something totally different. This allows someone to take control of your computer and run the software on your computer, just like they where sitting at your computer. You want this off normally. This has nothing to do with sharing files over a network. > I'm running Win'XP Home on two machines. I have firewalls disabled > on both machines. Good! > I'm successfully pinging each PC one from the other. Good! > What do I do? How do I create a network? I am trying to set it up > so that I can > share folders on one machine with another. You need to share folders like you started to do. If you share a whole drive, you can't use c$, d$, etc. As this is automatically shared (with administrator accounts) and to use other names (although you won't see them as shared, they are secretly known). Maybe using names like "Drive C", "Drive D", etc. But other folders, you can use almost anything. -- Bill |
| |||
| Re: Unable to setup a network I've been trying to set up two computers for sharing folders for some two weeks, now. In that time I've probably posted a note a day with a variety of newsgroups each with a specific question. I'm not getting very far, very fast. Could you walk me through the entire process, one step at a time? Don J ------------------------------------------------------------------------- "BillW50" <BillW50@aol.kom> wrote in message news:epRD%23DLnHHA.5032@TK2MSFTNGP02.phx.gbl... > "Don J" <dej8801@comcast.net> wrote in message > news:AYadnTg428ahzM7bnZ2dnUVZ_i2dnZ2d@comcast.com >> Right clicking a folder on my system and selecting "Sharing and >> Security" from the displayed menu yields a dialog box that has no >> "Share this folder on the network" checkbox available. I gather from >> my reading, that this implies that the computer is not on a network. > > Nope, it doesn't mean it isn't on a network. It means it isn't shared on > the network. > >> On the same display is the statement "As a security measure, Windows >> has disabled remote access to this computer. However, you can enable >> remote access and safely share files by running the 'Network Setup >> Wizard'". I've run the 'Network Setup Wizard', and it fails to >> establish a network, as evidenced by the fact that again selecting >> "Sharing and Security" yields the same screen as described above, >> with no changes. > > Remote Access is something totally different. This allows someone to take > control of your computer and run the software on your computer, just like > they where sitting at your computer. You want this off normally. This has > nothing to do with sharing files over a network. > >> I'm running Win'XP Home on two machines. I have firewalls disabled >> on both machines. > > Good! > >> I'm successfully pinging each PC one from the other. > > Good! > >> What do I do? How do I create a network? I am trying to set it up >> so that I can >> share folders on one machine with another. > > You need to share folders like you started to do. If you share a whole > drive, you can't use c$, d$, etc. As this is automatically shared (with > administrator accounts) and to use other names (although you won't see > them as shared, they are secretly known). Maybe using names like "Drive > C", "Drive D", etc. But other folders, you can use almost anything. > > -- > Bill |
| |||
| Re: Unable to setup a network "Don J" <dej8801@comcast.net> wrote in message news:mdCdnetLg-he787bnZ2dnUVZ_gqdnZ2d@comcast.com > I've been trying to set up two computers for sharing folders for some > two weeks, now. In that time I've probably posted a note a day with > a variety of newsgroups each with a specific question. I'm not > getting very far, very fast. Could you walk me through the entire > process, one step at a time? Well it can be very easy or very hard. Trust me, I have been through it a lot. Although I have a lot of questions for you too. So I don't have to spend a week writing a book about this. :) 1) Both computers can access the Internet through the network, right? 2) Is any computer wireless? This changes things a lot. How are they connected to the network anyway? Ethernet, USB, wireless, HomePNA, etc? 3) I have seen no evidence that you allowed one single folder to be shared. Share one and see if the other one can see it. Fire up Explorer (nor Internet Explorer, but the file manager one). 3a) Open up "My Network Places" 3b) Entire Network 3c) Microsoft Windows Network 3d) Open a network name (default is MSHOME, I think) 3e) You should see the other computer and your computer that you have shared (meaning folders, or whatever). Now get back to us and let us know the answers to the best of your ability. -- Bill |
| |||
| Re: Unable to setup a network "BillW50" <BillW50@aol.kom> wrote in message news:evIFwXMnHHA.3888@TK2MSFTNGP03.phx.gbl... > "Don J" <dej8801@comcast.net> wrote in message > news:mdCdnetLg-he787bnZ2dnUVZ_gqdnZ2d@comcast.com >> I've been trying to set up two computers for sharing folders for some >> two weeks, now. In that time I've probably posted a note a day with >> a variety of newsgroups each with a specific question. I'm not >> getting very far, very fast. Could you walk me through the entire >> process, one step at a time? > > Well it can be very easy or very hard. Trust me, I have been through it a > lot. Although I have a lot of questions for you too. So I don't have to > spend a week writing a book about this. :) > > 1) Both computers can access the Internet through the network, right? Yes, both computers can access the internet. > 2) Is any computer wireless? This changes things a lot. How are they > connected to the network anyway? Ethernet, USB, wireless, HomePNA, etc? No, neither computer is wireless. > 3) I have seen no evidence that you allowed one single folder to be > shared. Share one and see if the other one can see it. Fire up Explorer > (nor Internet Explorer, but the file manager one). Yes, there are folders on both computers marked as shared. > 3a) Open up "My Network Places" > > 3b) Entire Network > > 3c) Microsoft Windows Network > > 3d) Open a network name (default is MSHOME, I think) > > 3e) You should see the other computer and your computer that you have > shared (meaning folders, or whatever). Yes, there is a folder marker Mshome on both machines. When I try to open it I get a message on one machine that says "Mshome is not accessible. You might not have permission to use this resource. Contact th administrator of this server to find out if you have access permissions. The list of servers for this newsgroup is not currently available". On the other machine the folder opens but there is nothing in it. > Now get back to us and let us know the answers to the best of your > ability. > > -- > Bill |
| |||
| Re: Unable to setup a network "Don J" <dej8801@comcast.net> wrote in message news:z-CdnZ4R4rlRHc7bnZ2dnUVZ_sGqnZ2d@comcast.com > "BillW50" <BillW50@aol.kom> wrote in message > news:evIFwXMnHHA.3888@TK2MSFTNGP03.phx.gbl... >> "Don J" <dej8801@comcast.net> wrote in message >> news:mdCdnetLg-he787bnZ2dnUVZ_gqdnZ2d@comcast.com >>> I've been trying to set up two computers for sharing folders for >>> some two weeks, now. In that time I've probably posted a note a >>> day with a variety of newsgroups each with a specific question. I'm >>> not getting very far, very fast. Could you walk me through the >>> entire process, one step at a time? >> >> Well it can be very easy or very hard. Trust me, I have been through >> it a lot. Although I have a lot of questions for you too. So I don't >> have to spend a week writing a book about this. :) >> >> 1) Both computers can access the Internet through the network, right? > > Yes, both computers can access the internet. Oh great! :) >> 2) Is any computer wireless? This changes things a lot. How are they >> connected to the network anyway? Ethernet, USB, wireless, HomePNA, >> etc? > > No, neither computer is wireless. Oh good, how are they connected? Is it that funny cable that almost looks like a telephone jack? >> 3) I have seen no evidence that you allowed one single folder to be >> shared. Share one and see if the other one can see it. Fire up >> Explorer (nor Internet Explorer, but the file manager one). > > Yes, there are folders on both computers marked as shared. > >> 3a) Open up "My Network Places" >> >> 3b) Entire Network >> >> 3c) Microsoft Windows Network >> >> 3d) Open a network name (default is MSHOME, I think) >> >> 3e) You should see the other computer and your computer that you have >> shared (meaning folders, or whatever). > > Yes, there is a folder marker Mshome on both machines. > > When I try to open it I get a message on one machine that says > "Mshome is not accessible. You might not have permission to use this > resource. Contact th administrator of this server to find out if you > have access permissions. The list of servers for this newsgroup is > not currently available". > > On the other machine the folder opens but there is nothing in it. List of servers for newsgroups? Oh no! You won't find any newsgroups servers on the other computer. Well not on your own network anyway. >> Now get back to us and let us know the answers to the best of your >> ability. -- Bill |
| |||
| Re: Unable to setup a network Yes, they are connected through a router using a pair of "Ethernet" cables which look almost like telephone jacks. Don J --------------------------------------------------------------------------------- There are no more comments below this point. "BillW50" <BillW50@aol.kom> wrote in message news:evBEpfNnHHA.4516@TK2MSFTNGP05.phx.gbl... > "Don J" <dej8801@comcast.net> wrote in message > news:z-CdnZ4R4rlRHc7bnZ2dnUVZ_sGqnZ2d@comcast.com >> "BillW50" <BillW50@aol.kom> wrote in message >> news:evIFwXMnHHA.3888@TK2MSFTNGP03.phx.gbl... >>> "Don J" <dej8801@comcast.net> wrote in message >>> news:mdCdnetLg-he787bnZ2dnUVZ_gqdnZ2d@comcast.com >>>> I've been trying to set up two computers for sharing folders for >>>> some two weeks, now. In that time I've probably posted a note a >>>> day with a variety of newsgroups each with a specific question. I'm not >>>> getting very far, very fast. Could you walk me through the >>>> entire process, one step at a time? >>> >>> Well it can be very easy or very hard. Trust me, I have been through >>> it a lot. Although I have a lot of questions for you too. So I don't >>> have to spend a week writing a book about this. :) >>> >>> 1) Both computers can access the Internet through the network, right? >> >> Yes, both computers can access the internet. > > Oh great! :) > >>> 2) Is any computer wireless? This changes things a lot. How are they >>> connected to the network anyway? Ethernet, USB, wireless, HomePNA, >>> etc? >> >> No, neither computer is wireless. > > Oh good, how are they connected? Is it that funny cable that almost looks > like a telephone jack? > >>> 3) I have seen no evidence that you allowed one single folder to be >>> shared. Share one and see if the other one can see it. Fire up >>> Explorer (nor Internet Explorer, but the file manager one). >> >> Yes, there are folders on both computers marked as shared. >> >>> 3a) Open up "My Network Places" >>> >>> 3b) Entire Network >>> >>> 3c) Microsoft Windows Network >>> >>> 3d) Open a network name (default is MSHOME, I think) >>> >>> 3e) You should see the other computer and your computer that you have >>> shared (meaning folders, or whatever). >> >> Yes, there is a folder marker Mshome on both machines. >> >> When I try to open it I get a message on one machine that says >> "Mshome is not accessible. You might not have permission to use this >> resource. Contact th administrator of this server to find out if you >> have access permissions. The list of servers for this newsgroup is >> not currently available". >> >> On the other machine the folder opens but there is nothing in it. > > List of servers for newsgroups? Oh no! You won't find any newsgroups > servers on the other computer. Well not on your own network anyway. > >>> Now get back to us and let us know the answers to the best of your >>> ability. > > -- > Bill |
| |||
| Re: Unable to setup a network Okay what is this about trying to access newsgroup servers on the other computer then? Okay one computer can see MSHOME but nothing in it. Let's call this computer A. It should see its own shared folders. Or did you only set one computer (computer B) with shared folder(s)? Also to save some confusion, is both computers running Administrator accounts? Computer B can see its own shared folders right? ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ There are no more comments below this point. "Don J" <dej8801@comcast.net> wrote in message news:1-6dnTTQsvZUB87bnZ2dnUVZ_iydnZ2d@comcast.com > Yes, they are connected through a router using a pair of "Ethernet" > cables which look almost like telephone jacks. > > Don J > > --------------------------------------------------------------------------------- > There are no more comments below this point. > > "BillW50" <BillW50@aol.kom> wrote in message > news:evBEpfNnHHA.4516@TK2MSFTNGP05.phx.gbl... >> "Don J" <dej8801@comcast.net> wrote in message >> news:z-CdnZ4R4rlRHc7bnZ2dnUVZ_sGqnZ2d@comcast.com >>> "BillW50" <BillW50@aol.kom> wrote in message >>> news:evIFwXMnHHA.3888@TK2MSFTNGP03.phx.gbl... >>>> "Don J" <dej8801@comcast.net> wrote in message >>>> news:mdCdnetLg-he787bnZ2dnUVZ_gqdnZ2d@comcast.com >>>>> I've been trying to set up two computers for sharing folders for >>>>> some two weeks, now. In that time I've probably posted a note a >>>>> day with a variety of newsgroups each with a specific question. >>>>> I'm not getting very far, very fast. Could you walk me through >>>>> the entire process, one step at a time? >>>> >>>> Well it can be very easy or very hard. Trust me, I have been >>>> through it a lot. Although I have a lot of questions for you too. >>>> So I don't have to spend a week writing a book about this. :) >>>> >>>> 1) Both computers can access the Internet through the network, >>>> right? >>> >>> Yes, both computers can access the internet. >> >> Oh great! :) >> >>>> 2) Is any computer wireless? This changes things a lot. How are >>>> they connected to the network anyway? Ethernet, USB, wireless, >>>> HomePNA, etc? >>> >>> No, neither computer is wireless. >> >> Oh good, how are they connected? Is it that funny cable that almost >> looks like a telephone jack? >> >>>> 3) I have seen no evidence that you allowed one single folder to be >>>> shared. Share one and see if the other one can see it. Fire up >>>> Explorer (nor Internet Explorer, but the file manager one). >>> >>> Yes, there are folders on both computers marked as shared. >>> >>>> 3a) Open up "My Network Places" >>>> >>>> 3b) Entire Network >>>> >>>> 3c) Microsoft Windows Network >>>> >>>> 3d) Open a network name (default is MSHOME, I think) >>>> >>>> 3e) You should see the other computer and your computer that you >>>> have shared (meaning folders, or whatever). >>> >>> Yes, there is a folder marker Mshome on both machines. >>> >>> When I try to open it I get a message on one machine that says >>> "Mshome is not accessible. You might not have permission to use >>> this resource. Contact th administrator of this server to find out >>> if you have access permissions. The list of servers for this >>> newsgroup is not currently available". >>> >>> On the other machine the folder opens but there is nothing in it. >> >> List of servers for newsgroups? Oh no! You won't find any newsgroups >> servers on the other computer. Well not on your own network anyway. >> >>>> Now get back to us and let us know the answers to the best of your >>>> ability. >> >> -- >> Bill -- Bill |
| |||
| Re: Unable to setup a network Both computers are running Administrator accounts. Both are named Johansen. A funny thing is happening. Every so often what I see when Mshome is activated changes. Once I open it what I see stays the same when I close and immediatly reopen it. But if I go off and, say, look at my email, then come back and reopen it everything will change. I think that there have probably been about every combination of items displayed. Right now it is displaying "Computer A" on both screens. Usually when "Computer X" is displayed on the "Computer Y" screen clicking the "Computer X" icon will result in the error message described previously. However this time I've got a dialog box displayed that says: "Connecting to 'Computer A'" and asking me for a password for "Computer A\Guest". The Guest accounts are inactive on both computers, and when activated will not accept a Password. Where do we go from here? Don J --------------------------------------------------------------------------------- "BillW50" <BillW50@aol.kom> wrote in message news:e%2355x0NnHHA.2452@TK2MSFTNGP04.phx.gbl... > Okay what is this about trying to access newsgroup servers on the other > computer then? > > Okay one computer can see MSHOME but nothing in it. Let's call this > computer A. It should see its own shared folders. Or did you only set one > computer (computer B) with shared folder(s)? Also to save some confusion, > is both computers running Administrator accounts? > > Computer B can see its own shared folders right? > > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > There are no more comments below this point. > > "Don J" <dej8801@comcast.net> wrote in message > news:1-6dnTTQsvZUB87bnZ2dnUVZ_iydnZ2d@comcast.com >> Yes, they are connected through a router using a pair of "Ethernet" >> cables which look almost like telephone jacks. >> >> Don J >> >> --------------------------------------------------------------------------------- >> There are no more comments below this point. >> >> "BillW50" <BillW50@aol.kom> wrote in message >> news:evBEpfNnHHA.4516@TK2MSFTNGP05.phx.gbl... >>> "Don J" <dej8801@comcast.net> wrote in message >>> news:z-CdnZ4R4rlRHc7bnZ2dnUVZ_sGqnZ2d@comcast.com >>>> "BillW50" <BillW50@aol.kom> wrote in message >>>> news:evIFwXMnHHA.3888@TK2MSFTNGP03.phx.gbl... >>>>> "Don J" <dej8801@comcast.net> wrote in message >>>>> news:mdCdnetLg-he787bnZ2dnUVZ_gqdnZ2d@comcast.com >>>>>> I've been trying to set up two computers for sharing folders for >>>>>> some two weeks, now. In that time I've probably posted a note a >>>>>> day with a variety of newsgroups each with a specific question. >>>>>> I'm not getting very far, very fast. Could you walk me through >>>>>> the entire process, one step at a time? >>>>> >>>>> Well it can be very easy or very hard. Trust me, I have been >>>>> through it a lot. Although I have a lot of questions for you too. >>>>> So I don't have to spend a week writing a book about this. :) >>>>> >>>>> 1) Both computers can access the Internet through the network, >>>>> right? >>>> >>>> Yes, both computers can access the internet. >>> >>> Oh great! :) >>> >>>>> 2) Is any computer wireless? This changes things a lot. How are >>>>> they connected to the network anyway? Ethernet, USB, wireless, >>>>> HomePNA, etc? >>>> >>>> No, neither computer is wireless. >>> >>> Oh good, how are they connected? Is it that funny cable that almost >>> looks like a telephone jack? >>> >>>>> 3) I have seen no evidence that you allowed one single folder to be >>>>> shared. Share one and see if the other one can see it. Fire up >>>>> Explorer (nor Internet Explorer, but the file manager one). >>>> >>>> Yes, there are folders on both computers marked as shared. >>>> >>>>> 3a) Open up "My Network Places" >>>>> >>>>> 3b) Entire Network >>>>> >>>>> 3c) Microsoft Windows Network >>>>> >>>>> 3d) Open a network name (default is MSHOME, I think) >>>>> >>>>> 3e) You should see the other computer and your computer that you >>>>> have shared (meaning folders, or whatever). >>>> >>>> Yes, there is a folder marker Mshome on both machines. >>>> >>>> When I try to open it I get a message on one machine that says >>>> "Mshome is not accessible. You might not have permission to use >>>> this resource. Contact th administrator of this server to find out >>>> if you have access permissions. The list of servers for this >>>> newsgroup is not currently available". >>>> >>>> On the other machine the folder opens but there is nothing in it. >>> >>> List of servers for newsgroups? Oh no! You won't find any newsgroups >>> servers on the other computer. Well not on your own network anyway. >>> >>>>> Now get back to us and let us know the answers to the best of your >>>>> ability. >>> >>> -- >>> Bill > > -- > Bill |
| |||
| Re: Unable to setup a network "Don J" <dej8801@comcast.net> wrote in message news:LdWdndYM0aDmL87bnZ2dnUVZ_qWvnZ2d@comcast.com > Both computers are running Administrator accounts. Both are named > Johansen. > A funny thing is happening. Every so often what I see when Mshome is > activated changes. Once I open it what I see stays the same when I > close and immediatly reopen it. But if I go off and, say, look at my > email, then come back and reopen it everything will change. I think > that there have probably been about every combination of items > displayed. Right now it is displaying "Computer A" on both screens. > Usually when "Computer X" is displayed on the "Computer Y" screen > clicking the "Computer X" icon will result in the error message > described previously. However this time I've got a dialog box > displayed that says: "Connecting to 'Computer A'" and asking me for a > password for "Computer A\Guest". The Guest accounts are inactive on > both computers, and when activated will not accept a Password. > Where do we go from here? Well computer names and user names are two different things. You probably know this, but just in case. And if you are really signing in on both computers with the same user name and password, it should never ask you for one when you access shared folders on the other one. Why? Because you are already signed in. Now I don't use Guest accounts, so I might be all wet. But I thought Guest accounts doesn't have passwords. Thus if you try to enter one, it will always fail. Thus why most people turns Guest accounts off. Although Guest accounts are useful for things like the public using a computer in a public setting, or having the public access your shared files, web pages, etc. But normally, you don't want such easy access to your computer. -- Bill |
| |||
| Re: Unable to setup a network So why is machine "Computer B" displaying the "Connecting to Computer A" screen asking me for a password for "Computer A/Ghost". What does it all mean? Don J ------------------------------------------------------------------------------------------------------- "BillW50" <BillW50@aol.kom> wrote in message news:%23gZ%23axSnHHA.596@TK2MSFTNGP06.phx.gbl... > "Don J" <dej8801@comcast.net> wrote in message > news:LdWdndYM0aDmL87bnZ2dnUVZ_qWvnZ2d@comcast.com >> Both computers are running Administrator accounts. Both are named >> Johansen. >> A funny thing is happening. Every so often what I see when Mshome is >> activated changes. Once I open it what I see stays the same when I >> close and immediatly reopen it. But if I go off and, say, look at my >> email, then come back and reopen it everything will change. I think >> that there have probably been about every combination of items >> displayed. Right now it is displaying "Computer A" on both screens. >> Usually when "Computer X" is displayed on the "Computer Y" screen >> clicking the "Computer X" icon will result in the error message >> described previously. However this time I've got a dialog box >> displayed that says: "Connecting to 'Computer A'" and asking me for a >> password for "Computer A\Guest". The Guest accounts are inactive on >> both computers, and when activated will not accept a Password. >> Where do we go from here? > > Well computer names and user names are two different things. You probably > know this, but just in case. And if you are really signing in on both > computers with the same user name and password, it should never ask you > for one when you access shared folders on the other one. Why? Because you > are already signed in. > > Now I don't use Guest accounts, so I might be all wet. But I thought Guest > accounts doesn't have passwords. Thus if you try to enter one, it will > always fail. Thus why most people turns Guest accounts off. Although Guest > accounts are useful for things like the public using a computer in a > public setting, or having the public access your shared files, web pages, > etc. But normally, you don't want such easy access to your computer. > > -- > Bill |
| |||
| Re: Unable to setup a network Hi, First off, may I suggest reading the following page: How to configure file sharing in Windows XP Now, as to your most recent question, the machine is attempting to determine your level of access in the shared folder. Thus if i login as guest i can only read the files, where as the administrator would also be able to edit them. All you should need to do is login to an account on the remote machine which has access to the shared folder. Note that I use the word should here. There are a few hurdles to cross first |
| Bookmarks |
| Thread Tools | |
| |
| | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| What type of network to setup? | k0103707 | Windows XP | 6 | 06-19-2008 02:20 PM |
| What's your opinion on my lenovo not seeing the network until I redidthe network setup (linksys router) | amandaF | Notebooks | 2 | 01-06-2008 05:51 PM |
| Unable to start any setup.exe | Myths | Windows Vista | 6 | 05-10-2007 08:00 PM |
| Unable to setup partnership between WMDC and Dell Axim X51v | Wayne Moses | Pocket PC General | 8 | 05-05-2007 03:45 PM |
| Unable to get an office notebook's wireless network to access theInternet on a home network. | Ant | Windows XP | 0 | 03-01-2007 11:45 PM |
| New To Technology Questions? | Do You Need Help with Your Computer or Device? | Do You Need Help with this site? |