| |
| |||||||
| Windows XP Tablet PC Newsgroup Join the discussions in the Microsoft Windows XP Tablet PC Newsgroup |
 |
| | LinkBack | Thread Tools |
01-22-2005, 09:16 AM
| |||
| |||
| Re: Input Panel Dave, is there an Event ID attached to the Service Control Manager episode? It would be helpful to know what is generating this issue. -- Chris H. Microsoft Windows MVP/Tablet PC Tablet Creations - http://nicecreations.us/ Associate Expert Expert Zone - www.microsoft.com/windowsxp/expertzone "DaveH" <DaveH@discussions.microsoft.com> wrote in message news:005C6297-D522-4202-899B-5AC8DE4D33B2@microsoft.com... > Don't know if this helps.... > > I cleared out the event log and restarted the machine. I get an error in > the > System log from the Service Control Manager. "The human interface device > Access service terminated with the following error: The specified module > could not be found" > > If I click on the Input Panel icon there are no events written to the log > so > this must have come from Startup > > > "Chris H." wrote: > >> I know this may sound strange, but hang in there. 8-) You installed >> Wacom's latest drivers, correct? If so, try going into Control Panel/Add >> or >> Remove Programs and uninstall the listing for Wacom Penabled Driver >> 4.82-9. >> The actual drivers will remain, but the Wacom entry on All Programs will >> be >> removed. Restart your system, and see if the Tablet Input Panel will >> then >> launch. >> -- >> Chris H. >> Microsoft Windows MVP/Tablet PC >> Tablet Creations - http://nicecreations.us/ >> Associate Expert >> Expert Zone - www.microsoft.com/windowsxp/expertzone >> >> >> "DaveH" <DaveH@discussions.microsoft.com> wrote in message >> news:39FB724E-3A5C-4F40-A88A-1A026EF7C911@microsoft.com... >> > Chris, >> > >> > I've checked as you suggest and have .NET Framework 1.1 installed. >> > >> > If I watch Task Manager, when I click the Input Panel icon, a process >> > for >> > tabtip.exe starts - it's just that nothing shows up. I've rolled back >> > the >> > Wacom pen driver back to the Microsoft one but still no joy... >> > >> > Dave >> > "Chris H." wrote: >> > >> >> Dave, do you have .NET 1.1 installed? You can check that by going >> >> into >> >> Control Panel/Add or Remove Programs and look at the installed >> >> programs >> >> list. It should have a listing there for Microsoft .NET Framework >> >> 1.1. >> >> If >> >> it doesn't say exactly that, you should download and install it. >> >> There's >> >> more information here: >> >> http://msdn.microsoft.com/netframewo.../framework1_1/ . >> >> -- >> >> Chris H. >> >> Microsoft Windows MVP/Tablet PC >> >> Tablet Creations - http://nicecreations.us/ >> >> Associate Expert >> >> Expert Zone - www.microsoft.com/windowsxp/expertzone >> >> >> >> >> >> "DaveH" <DaveH@discussions.microsoft.com> wrote in message >> >> news:329A9B3D-62CE-495B-942E-CD8CCFC71126@microsoft.com... >> >> > Chris >> >> > >> >> > Makes sense - thanks. I've done that and guess what....no >> >> > difference. >> >> > >> >> > This definitely used to work before I put SP2 on... >> >> > >> >> > Still grateful for any other insights anyone might have >> >> > >> >> > Thanks >> >> > >> >> > Dave >> >> > >> >> > "Chris H." wrote: >> >> > >> >> >> In Safe Mode, only "generic" drivers are functional, so the current >> >> >> graphics >> >> >> driver will not be running. It is more efficient to uninstall >> >> >> non-operational drivers and replace them, then trying to >> >> >> uninstall/replace >> >> >> those in use. >> >> >> -- >> >> >> Chris H. >> >> >> Microsoft Windows MVP/Tablet PC >> >> >> Tablet Creations - http://nicecreations.us/ >> >> >> Associate Expert >> >> >> Expert Zone - www.microsoft.com/windowsxp/expertzone >> >> >> >> >> >> >> >> >> "DaveH" <DaveH@discussions.microsoft.com> wrote in message >> >> >> news:3020CDEE-7BB8-4EAF-9CB9-502DB145F561@microsoft.com... >> >> >> > One other dumb question - what's the significance of doing this >> >> >> > in >> >> >> > Safe >> >> >> > Mode? >> >> >> > >> >> >> > "Chris H." wrote: >> >> >> > >> >> >> >> No, don't uninstall it. Try reinstalling your graphics driver, >> >> >> >> even >> >> >> >> if >> >> >> >> you >> >> >> >> need to do it in Safe Mode. >> >> >> >> -- >> >> >> >> Chris H. >> >> >> >> Microsoft Windows MVP/Tablet PC >> >> >> >> Tablet Creations - http://nicecreations.us/ >> >> >> >> Associate Expert >> >> >> >> Expert Zone - www.microsoft.com/windowsxp/expertzone >> >> >> >> >> >> >> >> >> >> >> >> "DaveH" <DaveH@discussions.microsoft.com> wrote in message >> >> >> >> news:9D11AC40-6C8B-4B5D-B78A-C2BD16CD4A6B@microsoft.com... >> >> >> >> > Chris >> >> >> >> > >> >> >> >> > I downloaded the "enhanced pen driver" from Wacom and >> >> >> >> > installed >> >> >> >> > it....no >> >> >> >> > effect. I can run the Tablet & Pen Settings uitlity along with >> >> >> >> > the >> >> >> >> > Wacom >> >> >> >> > Tablet Properties utility - but the Input Panel still won't >> >> >> >> > launch. >> >> >> >> > >> >> >> >> > I have a horrible feeling I'm going to have to uninstall >> >> >> >> > SP2... >> >> >> >> > >> >> >> >> > "Chris H." wrote: >> >> >> >> > >> >> >> >> >> Dave, try installing the Wacom driver for your pen from >> >> >> >> >> www.wacom.com. >> >> >> >> >> It >> >> >> >> >> has solved several issues. >> >> >> >> >> -- >> >> >> >> >> Chris H. >> >> >> >> >> Microsoft Windows MVP/Tablet PC >> >> >> >> >> Tablet Creations - http://nicecreations.us/ >> >> >> >> >> Associate Expert >> >> >> >> >> Expert Zone - www.microsoft.com/windowsxp/expertzone >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> "DaveH" <DaveH@discussions.microsoft.com> wrote in message >> >> >> >> >> news:3052BB04-54F9-4A7B-9654-02A0D45DCD62@microsoft.com... >> >> >> >> >> > I've recently upgraded to SP2 and the Tablet PC Input Panel >> >> >> >> >> > no >> >> >> >> >> > longer >> >> >> >> >> > works. >> >> >> >> >> > The icon is there on the taskbar but clicking it has no >> >> >> >> >> > effect. >> >> >> >> >> > The machine is a Toshiba Portege M200 running SP2 and >> >> >> >> >> > Office >> >> >> >> >> > 2003 >> >> >> >> >> > with >> >> >> >> >> > all >> >> >> >> >> > updates applied. >> >> >> >> >> > Anyone any ideas? >> >> >> >> >> > From the other posts in this forum I've registered the two >> >> >> >> >> > DLLs >> >> >> >> >> > in >> >> >> >> >> > the >> >> >> >> >> > Ink >> >> >> >> >> > directory successfully but these have had no effect. If I >> >> >> >> >> > need >> >> >> >> >> > to >> >> >> >> >> > reinstall >> >> >> >> >> > drivers, which drivers? >> >> >> >> >> > All help gratefully received... >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >>      |
|
01-22-2005, 09:16 AM
| ||
| |
|
01-22-2005, 11:18 AM
| |||
| |||
| Re: Input Panel DaveH wrote: > Don't know if this helps.... > > I cleared out the event log and restarted the machine. I get an error in the > System log from the Service Control Manager. "The human interface device > Access service terminated with the following error: The specified module > could not be found" > > If I click on the Input Panel icon there are no events written to the log so > this must have come from Startup Could help: http://groups.google.fi/groups?hl=fi...TNGP09.phx.gbl cheers, - Jan |
|
01-22-2005, 02:16 PM
| |||
| |||
| Re: Input Panel I think I have the same problem...try launching and closing the 'get going with tablet pc' tutorial...that's how I can get mine to launch. Then I run into another problem with tabtip.exe crashing. But see if you can at least get it on screen. Dave. "DaveH" wrote: > Don't know if this helps.... > > I cleared out the event log and restarted the machine. I get an error in the > System log from the Service Control Manager. "The human interface device > Access service terminated with the following error: The specified module > could not be found" > > If I click on the Input Panel icon there are no events written to the log so > this must have come from Startup > > > "Chris H." wrote: > > > I know this may sound strange, but hang in there. 8-) You installed > > Wacom's latest drivers, correct? If so, try going into Control Panel/Add or > > Remove Programs and uninstall the listing for Wacom Penabled Driver 4.82-9. > > The actual drivers will remain, but the Wacom entry on All Programs will be > > removed. Restart your system, and see if the Tablet Input Panel will then > > launch. > > -- > > Chris H. > > Microsoft Windows MVP/Tablet PC > > Tablet Creations - http://nicecreations.us/ > > Associate Expert > > Expert Zone - www.microsoft.com/windowsxp/expertzone > > > > > > "DaveH" <DaveH@discussions.microsoft.com> wrote in message > > news:39FB724E-3A5C-4F40-A88A-1A026EF7C911@microsoft.com... > > > Chris, > > > > > > I've checked as you suggest and have .NET Framework 1.1 installed. > > > > > > If I watch Task Manager, when I click the Input Panel icon, a process for > > > tabtip.exe starts - it's just that nothing shows up. I've rolled back the > > > Wacom pen driver back to the Microsoft one but still no joy... > > > > > > Dave > > > "Chris H." wrote: > > > > > >> Dave, do you have .NET 1.1 installed? You can check that by going into > > >> Control Panel/Add or Remove Programs and look at the installed programs > > >> list. It should have a listing there for Microsoft .NET Framework 1.1. > > >> If > > >> it doesn't say exactly that, you should download and install it. There's > > >> more information here: > > >> http://msdn.microsoft.com/netframewo.../framework1_1/ . > > >> -- > > >> Chris H. > > >> Microsoft Windows MVP/Tablet PC > > >> Tablet Creations - http://nicecreations.us/ > > >> Associate Expert > > >> Expert Zone - www.microsoft.com/windowsxp/expertzone > > >> > > >> > > >> "DaveH" <DaveH@discussions.microsoft.com> wrote in message > > >> news:329A9B3D-62CE-495B-942E-CD8CCFC71126@microsoft.com... > > >> > Chris > > >> > > > >> > Makes sense - thanks. I've done that and guess what....no difference. > > >> > > > >> > This definitely used to work before I put SP2 on... > > >> > > > >> > Still grateful for any other insights anyone might have > > >> > > > >> > Thanks > > >> > > > >> > Dave > > >> > > > >> > "Chris H." wrote: > > >> > > > >> >> In Safe Mode, only "generic" drivers are functional, so the current > > >> >> graphics > > >> >> driver will not be running. It is more efficient to uninstall > > >> >> non-operational drivers and replace them, then trying to > > >> >> uninstall/replace > > >> >> those in use. > > >> >> -- > > >> >> Chris H. > > >> >> Microsoft Windows MVP/Tablet PC > > >> >> Tablet Creations - http://nicecreations.us/ > > >> >> Associate Expert > > >> >> Expert Zone - www.microsoft.com/windowsxp/expertzone > > >> >> > > >> >> > > >> >> "DaveH" <DaveH@discussions.microsoft.com> wrote in message > > >> >> news:3020CDEE-7BB8-4EAF-9CB9-502DB145F561@microsoft.com... > > >> >> > One other dumb question - what's the significance of doing this in > > >> >> > Safe > > >> >> > Mode? > > >> >> > > > >> >> > "Chris H." wrote: > > >> >> > > > >> >> >> No, don't uninstall it. Try reinstalling your graphics driver, > > >> >> >> even > > >> >> >> if > > >> >> >> you > > >> >> >> need to do it in Safe Mode. > > >> >> >> -- > > >> >> >> Chris H. > > >> >> >> Microsoft Windows MVP/Tablet PC > > >> >> >> Tablet Creations - http://nicecreations.us/ > > >> >> >> Associate Expert > > >> >> >> Expert Zone - www.microsoft.com/windowsxp/expertzone > > >> >> >> > > >> >> >> > > >> >> >> "DaveH" <DaveH@discussions.microsoft.com> wrote in message > > >> >> >> news:9D11AC40-6C8B-4B5D-B78A-C2BD16CD4A6B@microsoft.com... > > >> >> >> > Chris > > >> >> >> > > > >> >> >> > I downloaded the "enhanced pen driver" from Wacom and installed > > >> >> >> > it....no > > >> >> >> > effect. I can run the Tablet & Pen Settings uitlity along with > > >> >> >> > the > > >> >> >> > Wacom > > >> >> >> > Tablet Properties utility - but the Input Panel still won't > > >> >> >> > launch. > > >> >> >> > > > >> >> >> > I have a horrible feeling I'm going to have to uninstall SP2... > > >> >> >> > > > >> >> >> > "Chris H." wrote: > > >> >> >> > > > >> >> >> >> Dave, try installing the Wacom driver for your pen from > > >> >> >> >> www.wacom.com. > > >> >> >> >> It > > >> >> >> >> has solved several issues. > > >> >> >> >> -- > > >> >> >> >> Chris H. > > >> >> >> >> Microsoft Windows MVP/Tablet PC > > >> >> >> >> Tablet Creations - http://nicecreations.us/ > > >> >> >> >> Associate Expert > > >> >> >> >> Expert Zone - www.microsoft.com/windowsxp/expertzone > > >> >> >> >> > > >> >> >> >> > > >> >> >> >> "DaveH" <DaveH@discussions.microsoft.com> wrote in message > > >> >> >> >> news:3052BB04-54F9-4A7B-9654-02A0D45DCD62@microsoft.com... > > >> >> >> >> > I've recently upgraded to SP2 and the Tablet PC Input Panel no > > >> >> >> >> > longer > > >> >> >> >> > works. > > >> >> >> >> > The icon is there on the taskbar but clicking it has no > > >> >> >> >> > effect. > > >> >> >> >> > The machine is a Toshiba Portege M200 running SP2 and Office > > >> >> >> >> > 2003 > > >> >> >> >> > with > > >> >> >> >> > all > > >> >> >> >> > updates applied. > > >> >> >> >> > Anyone any ideas? > > >> >> >> >> > From the other posts in this forum I've registered the two > > >> >> >> >> > DLLs > > >> >> >> >> > in > > >> >> >> >> > the > > >> >> >> >> > Ink > > >> >> >> >> > directory successfully but these have had no effect. If I need > > >> >> >> >> > to > > >> >> >> >> > reinstall > > >> >> >> >> > drivers, which drivers? > > >> >> >> >> > All help gratefully received... > > >> >> >> >> > > >> >> >> >> > > >> >> >> >> > > >> >> >> > > >> >> >> > > >> >> >> > > >> >> > > >> >> > > >> >> > > >> > > >> > > >> > > > > > > |
|
01-23-2005, 07:18 AM
| |||
| |||
| Re: Input Panel Dave, could you send me an email with your real email address? -- Chris H. Microsoft Windows MVP/Tablet PC Tablet Creations - http://nicecreations.us/ Associate Expert Expert Zone - www.microsoft.com/windowsxp/expertzone "Dave B." <Dave B.@discussions.microsoft.com> wrote in message news:60CFCCB6-32EB-4E93-9DDE-FC3631B78C8C@microsoft.com... >I think I have the same problem...try launching and closing the 'get going > with tablet pc' tutorial...that's how I can get mine to launch. Then I > run > into another problem with tabtip.exe crashing. But see if you can at least > get it on screen. > > Dave. > > "DaveH" wrote: > >> Don't know if this helps.... >> >> I cleared out the event log and restarted the machine. I get an error in >> the >> System log from the Service Control Manager. "The human interface device >> Access service terminated with the following error: The specified module >> could not be found" >> >> If I click on the Input Panel icon there are no events written to the log >> so >> this must have come from Startup >> >> >> "Chris H." wrote: >> >> > I know this may sound strange, but hang in there. 8-) You installed >> > Wacom's latest drivers, correct? If so, try going into Control >> > Panel/Add or >> > Remove Programs and uninstall the listing for Wacom Penabled Driver >> > 4.82-9. >> > The actual drivers will remain, but the Wacom entry on All Programs >> > will be >> > removed. Restart your system, and see if the Tablet Input Panel will >> > then >> > launch. >> > -- >> > Chris H. >> > Microsoft Windows MVP/Tablet PC >> > Tablet Creations - http://nicecreations.us/ >> > Associate Expert >> > Expert Zone - www.microsoft.com/windowsxp/expertzone >> > >> > >> > "DaveH" <DaveH@discussions.microsoft.com> wrote in message >> > news:39FB724E-3A5C-4F40-A88A-1A026EF7C911@microsoft.com... >> > > Chris, >> > > >> > > I've checked as you suggest and have .NET Framework 1.1 installed. >> > > >> > > If I watch Task Manager, when I click the Input Panel icon, a process >> > > for >> > > tabtip.exe starts - it's just that nothing shows up. I've rolled back >> > > the >> > > Wacom pen driver back to the Microsoft one but still no joy... >> > > >> > > Dave >> > > "Chris H." wrote: >> > > >> > >> Dave, do you have .NET 1.1 installed? You can check that by going >> > >> into >> > >> Control Panel/Add or Remove Programs and look at the installed >> > >> programs >> > >> list. It should have a listing there for Microsoft .NET Framework >> > >> 1.1. >> > >> If >> > >> it doesn't say exactly that, you should download and install it. >> > >> There's >> > >> more information here: >> > >> http://msdn.microsoft.com/netframewo.../framework1_1/ . >> > >> -- >> > >> Chris H. >> > >> Microsoft Windows MVP/Tablet PC >> > >> Tablet Creations - http://nicecreations.us/ >> > >> Associate Expert >> > >> Expert Zone - www.microsoft.com/windowsxp/expertzone >> > >> >> > >> >> > >> "DaveH" <DaveH@discussions.microsoft.com> wrote in message >> > >> news:329A9B3D-62CE-495B-942E-CD8CCFC71126@microsoft.com... >> > >> > Chris >> > >> > >> > >> > Makes sense - thanks. I've done that and guess what....no >> > >> > difference. >> > >> > >> > >> > This definitely used to work before I put SP2 on... >> > >> > >> > >> > Still grateful for any other insights anyone might have >> > >> > >> > >> > Thanks >> > >> > >> > >> > Dave >> > >> > >> > >> > "Chris H." wrote: >> > >> > >> > >> >> In Safe Mode, only "generic" drivers are functional, so the >> > >> >> current >> > >> >> graphics >> > >> >> driver will not be running. It is more efficient to uninstall >> > >> >> non-operational drivers and replace them, then trying to >> > >> >> uninstall/replace >> > >> >> those in use. >> > >> >> -- >> > >> >> Chris H. >> > >> >> Microsoft Windows MVP/Tablet PC >> > >> >> Tablet Creations - http://nicecreations.us/ >> > >> >> Associate Expert >> > >> >> Expert Zone - www.microsoft.com/windowsxp/expertzone >> > >> >> >> > >> >> >> > >> >> "DaveH" <DaveH@discussions.microsoft.com> wrote in message >> > >> >> news:3020CDEE-7BB8-4EAF-9CB9-502DB145F561@microsoft.com... >> > >> >> > One other dumb question - what's the significance of doing this >> > >> >> > in >> > >> >> > Safe >> > >> >> > Mode? >> > >> >> > >> > >> >> > "Chris H." wrote: >> > >> >> > >> > >> >> >> No, don't uninstall it. Try reinstalling your graphics >> > >> >> >> driver, >> > >> >> >> even >> > >> >> >> if >> > >> >> >> you >> > >> >> >> need to do it in Safe Mode. >> > >> >> >> -- >> > >> >> >> Chris H. >> > >> >> >> Microsoft Windows MVP/Tablet PC >> > >> >> >> Tablet Creations - http://nicecreations.us/ >> > >> >> >> Associate Expert >> > >> >> >> Expert Zone - www.microsoft.com/windowsxp/expertzone >> > >> >> >> >> > >> >> >> >> > >> >> >> "DaveH" <DaveH@discussions.microsoft.com> wrote in message >> > >> >> >> news:9D11AC40-6C8B-4B5D-B78A-C2BD16CD4A6B@microsoft.com... >> > >> >> >> > Chris >> > >> >> >> > >> > >> >> >> > I downloaded the "enhanced pen driver" from Wacom and >> > >> >> >> > installed >> > >> >> >> > it....no >> > >> >> >> > effect. I can run the Tablet & Pen Settings uitlity along >> > >> >> >> > with >> > >> >> >> > the >> > >> >> >> > Wacom >> > >> >> >> > Tablet Properties utility - but the Input Panel still won't >> > >> >> >> > launch. >> > >> >> >> > >> > >> >> >> > I have a horrible feeling I'm going to have to uninstall >> > >> >> >> > SP2... >> > >> >> >> > >> > >> >> >> > "Chris H." wrote: >> > >> >> >> > >> > >> >> >> >> Dave, try installing the Wacom driver for your pen from >> > >> >> >> >> www.wacom.com. >> > >> >> >> >> It >> > >> >> >> >> has solved several issues. >> > >> >> >> >> -- >> > >> >> >> >> Chris H. >> > >> >> >> >> Microsoft Windows MVP/Tablet PC >> > >> >> >> >> Tablet Creations - http://nicecreations.us/ >> > >> >> >> >> Associate Expert >> > >> >> >> >> Expert Zone - www.microsoft.com/windowsxp/expertzone >> > >> >> >> >> >> > >> >> >> >> >> > >> >> >> >> "DaveH" <DaveH@discussions.microsoft.com> wrote in message >> > >> >> >> >> news:3052BB04-54F9-4A7B-9654-02A0D45DCD62@microsoft.com... >> > >> >> >> >> > I've recently upgraded to SP2 and the Tablet PC Input >> > >> >> >> >> > Panel no >> > >> >> >> >> > longer >> > >> >> >> >> > works. >> > >> >> >> >> > The icon is there on the taskbar but clicking it has no >> > >> >> >> >> > effect. >> > >> >> >> >> > The machine is a Toshiba Portege M200 running SP2 and >> > >> >> >> >> > Office >> > >> >> >> >> > 2003 >> > >> >> >> >> > with >> > >> >> >> >> > all >> > >> >> >> >> > updates applied. >> > >> >> >> >> > Anyone any ideas? >> > >> >> >> >> > From the other posts in this forum I've registered the >> > >> >> >> >> > two >> > >> >> >> >> > DLLs >> > >> >> >> >> > in >> > >> >> >> >> > the >> > >> >> >> >> > Ink >> > >> >> >> >> > directory successfully but these have had no effect. If I >> > >> >> >> >> > need >> > >> >> >> >> > to >> > >> >> >> >> > reinstall >> > >> >> >> >> > drivers, which drivers? >> > >> >> >> >> > All help gratefully received... >> > >> >> >> >> >> > >> >> >> >> >> > >> >> >> >> >> > >> >> >> >> > >> >> >> >> > >> >> >> >> > >> >> >> > >> >> >> > >> >> >> > >> >> > >> >> > >> >> > >> > >> > |
|
01-23-2005, 08:16 AM
| |||
| |||
| Re: Input Panel Got it. Thanks, Dave. -- Chris H. Microsoft Windows MVP/Tablet PC Tablet Creations - http://nicecreations.us/ Associate Expert Expert Zone - www.microsoft.com/windowsxp/expertzone "Chris H." <winxpnews********.com> wrote in message news:%23JVdpuVAFHA.1296@TK2MSFTNGP10.phx.gbl... > Dave, could you send me an email with your real email address? > -- > Chris H. > Microsoft Windows MVP/Tablet PC > Tablet Creations - http://nicecreations.us/ > Associate Expert > Expert Zone - www.microsoft.com/windowsxp/expertzone > > > "Dave B." <Dave B.@discussions.microsoft.com> wrote in message > news:60CFCCB6-32EB-4E93-9DDE-FC3631B78C8C@microsoft.com... >>I think I have the same problem...try launching and closing the 'get going >> with tablet pc' tutorial...that's how I can get mine to launch. Then I >> run >> into another problem with tabtip.exe crashing. But see if you can at >> least >> get it on screen. >> >> Dave. >> >> "DaveH" wrote: >> >>> Don't know if this helps.... >>> >>> I cleared out the event log and restarted the machine. I get an error in >>> the >>> System log from the Service Control Manager. "The human interface device >>> Access service terminated with the following error: The specified module >>> could not be found" >>> >>> If I click on the Input Panel icon there are no events written to the >>> log so >>> this must have come from Startup >>> >>> >>> "Chris H." wrote: >>> >>> > I know this may sound strange, but hang in there. 8-) You installed >>> > Wacom's latest drivers, correct? If so, try going into Control >>> > Panel/Add or >>> > Remove Programs and uninstall the listing for Wacom Penabled Driver >>> > 4.82-9. >>> > The actual drivers will remain, but the Wacom entry on All Programs >>> > will be >>> > removed. Restart your system, and see if the Tablet Input Panel will >>> > then >>> > launch. >>> > -- >>> > Chris H. >>> > Microsoft Windows MVP/Tablet PC >>> > Tablet Creations - http://nicecreations.us/ >>> > Associate Expert >>> > Expert Zone - www.microsoft.com/windowsxp/expertzone >>> > >>> > >>> > "DaveH" <DaveH@discussions.microsoft.com> wrote in message >>> > news:39FB724E-3A5C-4F40-A88A-1A026EF7C911@microsoft.com... >>> > > Chris, >>> > > >>> > > I've checked as you suggest and have .NET Framework 1.1 installed. >>> > > >>> > > If I watch Task Manager, when I click the Input Panel icon, a >>> > > process for >>> > > tabtip.exe starts - it's just that nothing shows up. I've rolled >>> > > back the >>> > > Wacom pen driver back to the Microsoft one but still no joy... >>> > > >>> > > Dave >>> > > "Chris H." wrote: >>> > > >>> > >> Dave, do you have .NET 1.1 installed? You can check that by going >>> > >> into >>> > >> Control Panel/Add or Remove Programs and look at the installed >>> > >> programs >>> > >> list. It should have a listing there for Microsoft .NET Framework >>> > >> 1.1. >>> > >> If >>> > >> it doesn't say exactly that, you should download and install it. >>> > >> There's >>> > >> more information here: >>> > >> http://msdn.microsoft.com/netframewo.../framework1_1/ . >>> > >> -- >>> > >> Chris H. >>> > >> Microsoft Windows MVP/Tablet PC >>> > >> Tablet Creations - http://nicecreations.us/ >>> > >> Associate Expert >>> > >> Expert Zone - www.microsoft.com/windowsxp/expertzone >>> > >> >>> > >> >>> > >> "DaveH" <DaveH@discussions.microsoft.com> wrote in message >>> > >> news:329A9B3D-62CE-495B-942E-CD8CCFC71126@microsoft.com... >>> > >> > Chris >>> > >> > >>> > >> > Makes sense - thanks. I've done that and guess what....no >>> > >> > difference. >>> > >> > >>> > >> > This definitely used to work before I put SP2 on... >>> > >> > >>> > >> > Still grateful for any other insights anyone might have >>> > >> > >>> > >> > Thanks >>> > >> > >>> > >> > Dave >>> > >> > >>> > >> > "Chris H." wrote: >>> > >> > >>> > >> >> In Safe Mode, only "generic" drivers are functional, so the >>> > >> >> current >>> > >> >> graphics >>> > >> >> driver will not be running. It is more efficient to uninstall >>> > >> >> non-operational drivers and replace them, then trying to >>> > >> >> uninstall/replace >>> > >> >> those in use. >>> > >> >> -- >>> > >> >> Chris H. >>> > >> >> Microsoft Windows MVP/Tablet PC >>> > >> >> Tablet Creations - http://nicecreations.us/ >>> > >> >> Associate Expert >>> > >> >> Expert Zone - www.microsoft.com/windowsxp/expertzone >>> > >> >> >>> > >> >> >>> > >> >> "DaveH" <DaveH@discussions.microsoft.com> wrote in message >>> > >> >> news:3020CDEE-7BB8-4EAF-9CB9-502DB145F561@microsoft.com... >>> > >> >> > One other dumb question - what's the significance of doing >>> > >> >> > this in >>> > >> >> > Safe >>> > >> >> > Mode? >>> > >> >> > >>> > >> >> > "Chris H." wrote: >>> > >> >> > >>> > >> >> >> No, don't uninstall it. Try reinstalling your graphics >>> > >> >> >> driver, >>> > >> >> >> even >>> > >> >> >> if >>> > >> >> >> you >>> > >> >> >> need to do it in Safe Mode. >>> > >> >> >> -- >>> > >> >> >> Chris H. >>> > >> >> >> Microsoft Windows MVP/Tablet PC >>> > >> >> >> Tablet Creations - http://nicecreations.us/ >>> > >> >> >> Associate Expert >>> > >> >> >> Expert Zone - www.microsoft.com/windowsxp/expertzone >>> > >> >> >> >>> > >> >> >> >>> > >> >> >> "DaveH" <DaveH@discussions.microsoft.com> wrote in message >>> > >> >> >> news:9D11AC40-6C8B-4B5D-B78A-C2BD16CD4A6B@microsoft.com... >>> > >> >> >> > Chris >>> > >> >> >> > >>> > >> >> >> > I downloaded the "enhanced pen driver" from Wacom and >>> > >> >> >> > installed >>> > >> >> >> > it....no >>> > >> >> >> > effect. I can run the Tablet & Pen Settings uitlity along >>> > >> >> >> > with >>> > >> >> >> > the >>> > >> >> >> > Wacom >>> > >> >> >> > Tablet Properties utility - but the Input Panel still won't >>> > >> >> >> > launch. >>> > >> >> >> > >>> > >> >> >> > I have a horrible feeling I'm going to have to uninstall >>> > >> >> >> > SP2... >>> > >> >> >> > >>> > >> >> >> > "Chris H." wrote: >>> > >> >> >> > >>> > >> >> >> >> Dave, try installing the Wacom driver for your pen from >>> > >> >> >> >> www.wacom.com. >>> > >> >> >> >> It >>> > >> >> >> >> has solved several issues. >>> > >> >> >> >> -- >>> > >> >> >> >> Chris H. >>> > >> >> >> >> Microsoft Windows MVP/Tablet PC >>> > >> >> >> >> Tablet Creations - http://nicecreations.us/ >>> > >> >> >> >> Associate Expert >>> > >> >> >> >> Expert Zone - www.microsoft.com/windowsxp/expertzone >>> > >> >> >> >> >>> > >> >> >> >> >>> > >> >> >> >> "DaveH" <DaveH@discussions.microsoft.com> wrote in message >>> > >> >> >> >> news:3052BB04-54F9-4A7B-9654-02A0D45DCD62@microsoft.com... >>> > >> >> >> >> > I've recently upgraded to SP2 and the Tablet PC Input >>> > >> >> >> >> > Panel no >>> > >> >> >> >> > longer >>> > >> >> >> >> > works. >>> > >> >> >> >> > The icon is there on the taskbar but clicking it has no >>> > >> >> >> >> > effect. >>> > >> >> >> >> > The machine is a Toshiba Portege M200 running SP2 and >>> > >> >> >> >> > Office >>> > >> >> >> >> > 2003 >>> > >> >> >> >> > with >>> > >> >> >> >> > all >>> > >> >> >> >> > updates applied. >>> > >> >> >> >> > Anyone any ideas? >>> > >> >> >> >> > From the other posts in this forum I've registered the >>> > >> >> >> >> > two >>> > >> >> >> >> > DLLs >>> > >> >> >> >> > in >>> > >> >> >> >> > the >>> > >> >> >> >> > Ink >>> > >> >> >> >> > directory successfully but these have had no effect. If >>> > >> >> >> >> > I need >>> > >> >> >> >> > to >>> > >> >> >> >> > reinstall >>> > >> >> >> >> > drivers, which drivers? >>> > >> >> >> >> > All help gratefully received... >>> > >> >> >> >> >>> > >> >> >> >> >>> > >> >> >> >> >>> > >> >> >> >>> > >> >> >> >>> > >> >> >> >>> > >> >> >>> > >> >> >>> > >> >> >>> > >> >>> > >> >>> > >> >>> > >>> > >>> > > > |
|
01-23-2005, 01:16 PM
| |||
| |||
| Re: Input Panel Thanks for the suggestions guys.... The event id is 7023. following the link that Jan gave, I've found the dll and sys files and moved them as suggested - the Human Interface Device service now starts. I've also tried lanching and closing the "getting going" tutorial and guess what....none of these things have made any difference!! TIP refuses to come up....aaaaargh!! "Dave B." wrote: > I think I have the same problem...try launching and closing the 'get going > with tablet pc' tutorial...that's how I can get mine to launch. Then I run > into another problem with tabtip.exe crashing. But see if you can at least > get it on screen. > > Dave. > > "DaveH" wrote: > > > Don't know if this helps.... > > > > I cleared out the event log and restarted the machine. I get an error in the > > System log from the Service Control Manager. "The human interface device > > Access service terminated with the following error: The specified module > > could not be found" > > > > If I click on the Input Panel icon there are no events written to the log so > > this must have come from Startup > > > > > > "Chris H." wrote: > > > > > I know this may sound strange, but hang in there. 8-) You installed > > > Wacom's latest drivers, correct? If so, try going into Control Panel/Add or > > > Remove Programs and uninstall the listing for Wacom Penabled Driver 4.82-9. > > > The actual drivers will remain, but the Wacom entry on All Programs will be > > > removed. Restart your system, and see if the Tablet Input Panel will then > > > launch. > > > -- > > > Chris H. > > > Microsoft Windows MVP/Tablet PC > > > Tablet Creations - http://nicecreations.us/ > > > Associate Expert > > > Expert Zone - www.microsoft.com/windowsxp/expertzone > > > > > > > > > "DaveH" <DaveH@discussions.microsoft.com> wrote in message > > > news:39FB724E-3A5C-4F40-A88A-1A026EF7C911@microsoft.com... > > > > Chris, > > > > > > > > I've checked as you suggest and have .NET Framework 1.1 installed. > > > > > > > > If I watch Task Manager, when I click the Input Panel icon, a process for > > > > tabtip.exe starts - it's just that nothing shows up. I've rolled back the > > > > Wacom pen driver back to the Microsoft one but still no joy... > > > > > > > > Dave > > > > "Chris H." wrote: > > > > > > > >> Dave, do you have .NET 1.1 installed? You can check that by going into > > > >> Control Panel/Add or Remove Programs and look at the installed programs > > > >> list. It should have a listing there for Microsoft .NET Framework 1.1. > > > >> If > > > >> it doesn't say exactly that, you should download and install it. There's > > > >> more information here: > > > >> http://msdn.microsoft.com/netframewo.../framework1_1/ . > > > >> -- > > > >> Chris H. > > > >> Microsoft Windows MVP/Tablet PC > > > >> Tablet Creations - http://nicecreations.us/ > > > >> Associate Expert > > > >> Expert Zone - www.microsoft.com/windowsxp/expertzone > > > >> > > > >> > > > >> "DaveH" <DaveH@discussions.microsoft.com> wrote in message > > > >> news:329A9B3D-62CE-495B-942E-CD8CCFC71126@microsoft.com... > > > >> > Chris > > > >> > > > > >> > Makes sense - thanks. I've done that and guess what....no difference. > > > >> > > > > >> > This definitely used to work before I put SP2 on... > > > >> > > > > >> > Still grateful for any other insights anyone might have > > > >> > > > > >> > Thanks > > > >> > > > > >> > Dave > > > >> > > > > >> > "Chris H." wrote: > > > >> > > > > >> >> In Safe Mode, only "generic" drivers are functional, so the current > > > >> >> graphics > > > >> >> driver will not be running. It is more efficient to uninstall > > > >> >> non-operational drivers and replace them, then trying to > > > >> >> uninstall/replace > > > >> >> those in use. > > > >> >> -- > > > >> >> Chris H. > > > >> >> Microsoft Windows MVP/Tablet PC > > > >> >> Tablet Creations - http://nicecreations.us/ > > > >> >> Associate Expert > > > >> >> Expert Zone - www.microsoft.com/windowsxp/expertzone > > > >> >> > > > >> >> > > > >> >> "DaveH" <DaveH@discussions.microsoft.com> wrote in message > > > >> >> news:3020CDEE-7BB8-4EAF-9CB9-502DB145F561@microsoft.com... > > > >> >> > One other dumb question - what's the significance of doing this in > > > >> >> > Safe > > > >> >> > Mode? > > > >> >> > > > > >> >> > "Chris H." wrote: > > > >> >> > > > > >> >> >> No, don't uninstall it. Try reinstalling your graphics driver, > > > >> >> >> even > > > >> >> >> if > > > >> >> >> you > > > >> >> >> need to do it in Safe Mode. > > > >> >> >> -- > > > >> >> >> Chris H. > > > >> >> >> Microsoft Windows MVP/Tablet PC > > > >> >> >> Tablet Creations - http://nicecreations.us/ > > > >> >> >> Associate Expert > > > >> >> >> Expert Zone - www.microsoft.com/windowsxp/expertzone > > > >> >> >> > > > >> >> >> > > > >> >> >> "DaveH" <DaveH@discussions.microsoft.com> wrote in message > > > >> >> >> news:9D11AC40-6C8B-4B5D-B78A-C2BD16CD4A6B@microsoft.com... > > > >> >> >> > Chris > > > >> >> >> > > > > >> >> >> > I downloaded the "enhanced pen driver" from Wacom and installed > > > >> >> >> > it....no > > > >> >> >> > effect. I can run the Tablet & Pen Settings uitlity along with > > > >> >> >> > the > > > >> >> >> > Wacom > > > >> >> >> > Tablet Properties utility - but the Input Panel still won't > > > >> >> >> > launch. > > > >> >> >> > > > > >> >> >> > I have a horrible feeling I'm going to have to uninstall SP2... > > > >> >> >> > > > > >> >> >> > "Chris H." wrote: > > > >> >> >> > > > > >> >> >> >> Dave, try installing the Wacom driver for your pen from > > > >> >> >> >> www.wacom.com. > > > >> >> >> >> It > > > >> >> >> >> has solved several issues. > > > >> >> >> >> -- > > > >> >> >> >> Chris H. > > > >> >> >> >> Microsoft Windows MVP/Tablet PC > > > >> >> >> >> Tablet Creations - http://nicecreations.us/ > > > >> >> >> >> Associate Expert > > > >> >> >> >> Expert Zone - www.microsoft.com/windowsxp/expertzone > > > >> >> >> >> > > > >> >> >> >> > > > >> >> >> >> "DaveH" <DaveH@discussions.microsoft.com> wrote in message > > > >> >> >> >> news:3052BB04-54F9-4A7B-9654-02A0D45DCD62@microsoft.com... > > > >> >> >> >> > I've recently upgraded to SP2 and the Tablet PC Input Panel no > > > >> >> >> >> > longer > > > >> >> >> >> > works. > > > >> >> >> >> > The icon is there on the taskbar but clicking it has no > > > >> >> >> >> > effect. > > > >> >> >> >> > The machine is a Toshiba Portege M200 running SP2 and Office > > > >> >> >> >> > 2003 > > > >> >> >> >> > with > > > >> >> >> >> > all > > > >> >> >> >> > updates applied. > > > >> >> >> >> > Anyone any ideas? > > > >> >> >> >> > From the other posts in this forum I've registered the two > > > >> >> >> >> > DLLs > > > >> >> >> >> > in > > > >> >> >> >> > the > > > >> >> >> >> > Ink > > > >> >> >> >> > directory successfully but these have had no effect. If I need > > > >> >> >> >> > to > > > >> >> >> >> > reinstall > > > >> >> >> >> > drivers, which drivers? > > > >> >> >> >> > All help gratefully received... > > > >> >> >> >> > > > >> >> >> >> > > > >> >> >> >> > > > >> >> >> > > > >> >> >> > > > >> >> >> > > > >> >> > > > >> >> > > > >> >> > > > >> > > > >> > > > >> > > > > > > > > > |
|
01-23-2005, 03:15 PM
| |||
| |||
| Re: Input Panel Dave, I've forwarded the error message from earlier today and now await Microsoft's response. I'll post back when I hear something, though since it is the weekend, I doubt we'll hear another until Monday at the earliest. -- Chris H. Microsoft Windows MVP/Tablet PC Tablet Creations - http://nicecreations.us/ Associate Expert Expert Zone - www.microsoft.com/windowsxp/expertzone "DaveH" <DaveH@discussions.microsoft.com> wrote in message news:F3AD5883-BC75-49CC-82DD-938538DC52E3@microsoft.com... > Thanks for the suggestions guys.... > > The event id is 7023. following the link that Jan gave, I've found the dll > and sys files and moved them as suggested - the Human Interface Device > service now starts. > > I've also tried lanching and closing the "getting going" tutorial and > guess > what....none of these things have made any difference!! TIP refuses to > come > up....aaaaargh!! > > "Dave B." wrote: > >> I think I have the same problem...try launching and closing the 'get >> going >> with tablet pc' tutorial...that's how I can get mine to launch. Then I >> run >> into another problem with tabtip.exe crashing. But see if you can at >> least >> get it on screen. >> >> Dave. >> >> "DaveH" wrote: >> >> > Don't know if this helps.... >> > >> > I cleared out the event log and restarted the machine. I get an error >> > in the >> > System log from the Service Control Manager. "The human interface >> > device >> > Access service terminated with the following error: The specified >> > module >> > could not be found" >> > >> > If I click on the Input Panel icon there are no events written to the >> > log so >> > this must have come from Startup >> > >> > >> > "Chris H." wrote: >> > >> > > I know this may sound strange, but hang in there. 8-) You installed >> > > Wacom's latest drivers, correct? If so, try going into Control >> > > Panel/Add or >> > > Remove Programs and uninstall the listing for Wacom Penabled Driver >> > > 4.82-9. >> > > The actual drivers will remain, but the Wacom entry on All Programs >> > > will be >> > > removed. Restart your system, and see if the Tablet Input Panel will >> > > then >> > > launch. >> > > -- >> > > Chris H. >> > > Microsoft Windows MVP/Tablet PC >> > > Tablet Creations - http://nicecreations.us/ >> > > Associate Expert >> > > Expert Zone - www.microsoft.com/windowsxp/expertzone >> > > >> > > >> > > "DaveH" <DaveH@discussions.microsoft.com> wrote in message >> > > news:39FB724E-3A5C-4F40-A88A-1A026EF7C911@microsoft.com... >> > > > Chris, >> > > > >> > > > I've checked as you suggest and have .NET Framework 1.1 installed. >> > > > >> > > > If I watch Task Manager, when I click the Input Panel icon, a >> > > > process for >> > > > tabtip.exe starts - it's just that nothing shows up. I've rolled >> > > > back the >> > > > Wacom pen driver back to the Microsoft one but still no joy... >> > > > >> > > > Dave >> > > > "Chris H." wrote: >> > > > >> > > >> Dave, do you have .NET 1.1 installed? You can check that by going >> > > >> into >> > > >> Control Panel/Add or Remove Programs and look at the installed >> > > >> programs >> > > >> list. It should have a listing there for Microsoft .NET Framework >> > > >> 1.1. >> > > >> If >> > > >> it doesn't say exactly that, you should download and install it. >> > > >> There's >> > > >> more information here: >> > > >> http://msdn.microsoft.com/netframewo.../framework1_1/ . >> > > >> -- >> > > >> Chris H. >> > > >> Microsoft Windows MVP/Tablet PC >> > > >> Tablet Creations - http://nicecreations.us/ >> > > >> Associate Expert >> > > >> Expert Zone - www.microsoft.com/windowsxp/expertzone >> > > >> >> > > >> >> > > >> "DaveH" <DaveH@discussions.microsoft.com> wrote in message >> > > >> news:329A9B3D-62CE-495B-942E-CD8CCFC71126@microsoft.com... >> > > >> > Chris >> > > >> > >> > > >> > Makes sense - thanks. I've done that and guess what....no >> > > >> > difference. >> > > >> > >> > > >> > This definitely used to work before I put SP2 on... >> > > >> > >> > > >> > Still grateful for any other insights anyone might have >> > > >> > >> > > >> > Thanks >> > > >> > >> > > >> > Dave >> > > >> > >> > > >> > "Chris H." wrote: >> > > >> > >> > > >> >> In Safe Mode, only "generic" drivers are functional, so the >> > > >> >> current >> > > >> >> graphics >> > > >> >> driver will not be running. It is more efficient to uninstall >> > > >> >> non-operational drivers and replace them, then trying to >> > > >> >> uninstall/replace >> > > >> >> those in use. >> > > >> >> -- >> > > >> >> Chris H. >> > > >> >> Microsoft Windows MVP/Tablet PC >> > > >> >> Tablet Creations - http://nicecreations.us/ >> > > >> >> Associate Expert >> > > >> >> Expert Zone - www.microsoft.com/windowsxp/expertzone >> > > >> >> >> > > >> >> >> > > >> >> "DaveH" <DaveH@discussions.microsoft.com> wrote in message >> > > >> >> news:3020CDEE-7BB8-4EAF-9CB9-502DB145F561@microsoft.com... >> > > >> >> > One other dumb question - what's the significance of doing >> > > >> >> > this in >> > > >> >> > Safe >> > > >> >> > Mode? >> > > >> >> > >> > > >> >> > "Chris H." wrote: >> > > >> >> > >> > > >> >> >> No, don't uninstall it. Try reinstalling your graphics >> > > >> >> >> driver, >> > > >> >> >> even >> > > >> >> >> if >> > > >> >> >> you >> > > >> >> >> need to do it in Safe Mode. >> > > >> >> >> -- >> > > >> >> >> Chris H. >> > > >> >> >> Microsoft Windows MVP/Tablet PC >> > > >> >> >> Tablet Creations - http://nicecreations.us/ >> > > >> >> >> Associate Expert >> > > >> >> >> Expert Zone - www.microsoft.com/windowsxp/expertzone >> > > >> >> >> >> > > >> >> >> >> > > >> >> >> "DaveH" <DaveH@discussions.microsoft.com> wrote in message >> > > >> >> >> news:9D11AC40-6C8B-4B5D-B78A-C2BD16CD4A6B@microsoft.com... >> > > >> >> >> > Chris >> > > >> >> >> > >> > > >> >> >> > I downloaded the "enhanced pen driver" from Wacom and >> > > >> >> >> > installed >> > > >> >> >> > it....no >> > > >> >> >> > effect. I can run the Tablet & Pen Settings uitlity along >> > > >> >> >> > with >> > > >> >> >> > the >> > > >> >> >> > Wacom >> > > >> >> >> > Tablet Properties utility - but the Input Panel still >> > > >> >> >> > won't >> > > >> >> >> > launch. >> > > >> >> >> > >> > > >> >> >> > I have a horrible feeling I'm going to have to uninstall >> > > >> >> >> > SP2... >> > > >> >> >> > >> > > >> >> >> > "Chris H." wrote: >> > > >> >> >> > >> > > >> >> >> >> Dave, try installing the Wacom driver for your pen from >> > > >> >> >> >> www.wacom.com. >> > > >> >> >> >> It >> > > >> >> >> >> has solved several issues. >> > > >> >> >> >> -- >> > > >> >> >> >> Chris H. >> > > >> >> >> >> Microsoft Windows MVP/Tablet PC >> > > >> >> >> >> Tablet Creations - http://nicecreations.us/ >> > > >> >> >> >> Associate Expert >> > > >> >> >> >> Expert Zone - www.microsoft.com/windowsxp/expertzone >> > > >> >> >> >> >> > > >> >> >> >> >> > > >> >> >> >> "DaveH" <DaveH@discussions.microsoft.com> wrote in >> > > >> >> >> >> message >> > > >> >> >> >> news:3052BB04-54F9-4A7B-9654-02A0D45DCD62@microsoft.com... >> > > >> >> >> >> > I've recently upgraded to SP2 and the Tablet PC Input >> > > >> >> >> >> > Panel no >> > > >> >> >> >> > longer >> > > >> >> >> >> > works. >> > > >> >> >> >> > The icon is there on the taskbar but clicking it has no >> > > >> >> >> >> > effect. >> > > >> >> >> >> > The machine is a Toshiba Portege M200 running SP2 and >> > > >> >> >> >> > Office >> > > >> >> >> >> > 2003 >> > > >> >> >> >> > with >> > > >> >> >> >> > all >> > > >> >> >> >> > updates applied. >> > > >> >> >> >> > Anyone any ideas? >> > > >> >> >> >> > From the other posts in this forum I've registered the >> > > >> >> >> >> > two >> > > >> >> >> >> > DLLs >> > > >> >> >> >> > in >> > > >> >> >> >> > the >> > > >> >> >> >> > Ink >> > > >> >> >> >> > directory successfully but these have had no effect. If >> > > >> >> >> >> > I need >> > > >> >> >> >> > to >> > > >> >> >> >> > reinstall >> > > >> >> >> >> > drivers, which drivers? >> > > >> >> >> >> > All help gratefully received... >> > > >> >> >> >> >> > > >> >> >> >> >> > > >> >> >> >> >> > > >> >> >> >> > > >> >> >> >> > > >> >> >> >> > > >> >> >> > > >> >> >> > > >> >> >> > > >> >> > > >> >> > > >> >> > > >> > > >> > > |
|
01-24-2005, 04:18 AM
| |||
| |||
| Re: Input Panel Chris Thanks...I hope they can suggest something! Dave "Chris H." wrote: > Dave, I've forwarded the error message from earlier today and now await > Microsoft's response. I'll post back when I hear something, though since it > is the weekend, I doubt we'll hear another until Monday at the earliest. > -- > Chris H. > Microsoft Windows MVP/Tablet PC > Tablet Creations - http://nicecreations.us/ > Associate Expert > Expert Zone - www.microsoft.com/windowsxp/expertzone > > > "DaveH" <DaveH@discussions.microsoft.com> wrote in message > news:F3AD5883-BC75-49CC-82DD-938538DC52E3@microsoft.com... > > Thanks for the suggestions guys.... > > > > The event id is 7023. following the link that Jan gave, I've found the dll > > and sys files and moved them as suggested - the Human Interface Device > > service now starts. > > > > I've also tried lanching and closing the "getting going" tutorial and > > guess > > what....none of these things have made any difference!! TIP refuses to > > come > > up....aaaaargh!! > > > > "Dave B." wrote: > > > >> I think I have the same problem...try launching and closing the 'get > >> going > >> with tablet pc' tutorial...that's how I can get mine to launch. Then I > >> run > >> into another problem with tabtip.exe crashing. But see if you can at > >> least > >> get it on screen. > >> > >> Dave. > >> > >> "DaveH" wrote: > >> > >> > Don't know if this helps.... > >> > > >> > I cleared out the event log and restarted the machine. I get an error > >> > in the > >> > System log from the Service Control Manager. "The human interface > >> > device > >> > Access service terminated with the following error: The specified > >> > module > >> > could not be found" > >> > > >> > If I click on the Input Panel icon there are no events written to the > >> > log so > >> > this must have come from Startup > >> > > >> > > >> > "Chris H." wrote: > >> > > >> > > I know this may sound strange, but hang in there. 8-) You installed > >> > > Wacom's latest drivers, correct? If so, try going into Control > >> > > Panel/Add or > >> > > Remove Programs and uninstall the listing for Wacom Penabled Driver > >> > > 4.82-9. > >> > > The actual drivers will remain, but the Wacom entry on All Programs > >> > > will be > >> > > removed. Restart your system, and see if the Tablet Input Panel will > >> > > then > >> > > launch. > >> > > -- > >> > > Chris H. > >> > > Microsoft Windows MVP/Tablet PC > >> > > Tablet Creations - http://nicecreations.us/ > >> > > Associate Expert > >> > > Expert Zone - www.microsoft.com/windowsxp/expertzone > >> > > > >> > > > >> > > "DaveH" <DaveH@discussions.microsoft.com> wrote in message > >> > > news:39FB724E-3A5C-4F40-A88A-1A026EF7C911@microsoft.com... > >> > > > Chris, > >> > > > > >> > > > I've checked as you suggest and have .NET Framework 1.1 installed. > >> > > > > >> > > > If I watch Task Manager, when I click the Input Panel icon, a > >> > > > process for > >> > > > tabtip.exe starts - it's just that nothing shows up. I've rolled > >> > > > back the > >> > > > Wacom pen driver back to the Microsoft one but still no joy... > >> > > > > >> > > > Dave > >> > > > "Chris H." wrote: > >> > > > > >> > > >> Dave, do you have .NET 1.1 installed? You can check that by going > >> > > >> into > >> > > >> Control Panel/Add or Remove Programs and look at the installed > >> > > >> programs > >> > > >> list. It should have a listing there for Microsoft .NET Framework > >> > > >> 1.1. > >> > > >> If > >> > > >> it doesn't say exactly that, you should download and install it. > >> > > >> There's > >> > > >> more information here: > >> > > >> http://msdn.microsoft.com/netframewo.../framework1_1/ . > >> > > >> -- > >> > > >> Chris H. > >> > > >> Microsoft Windows MVP/Tablet PC > >> > > >> Tablet Creations - http://nicecreations.us/ > >> > > >> Associate Expert > >> > > >> Expert Zone - www.microsoft.com/windowsxp/expertzone > >> > > >> > >> > > >> > >> > > >> "DaveH" <DaveH@discussions.microsoft.com> wrote in message > >> > > >> news:329A9B3D-62CE-495B-942E-CD8CCFC71126@microsoft.com... > >> > > >> > Chris > >> > > >> > > >> > > >> > Makes sense - thanks. I've done that and guess what....no > >> > > >> > difference. > >> > > >> > > >> > > >> > This definitely used to work before I put SP2 on... > >> > > >> > > >> > > >> > Still grateful for any other insights anyone might have > >> > > >> > > >> > > >> > Thanks > >> > > >> > > >> > > >> > Dave > >> > > >> > > >> > > >> > "Chris H." wrote: > >> > > >> > > >> > > >> >> In Safe Mode, only "generic" drivers are functional, so the > >> > > >> >> current > >> > > >> >> graphics > >> > > >> >> driver will not be running. It is more efficient to uninstall > >> > > >> >> non-operational drivers and replace them, then trying to > >> > > >> >> uninstall/replace > >> > > >> >> those in use. > >> > > >> >> -- > >> > > >> >> Chris H. > >> > > >> >> Microsoft Windows MVP/Tablet PC > >> > > >> >> Tablet Creations - http://nicecreations.us/ > >> > > >> >> Associate Expert > >> > > >> >> Expert Zone - www.microsoft.com/windowsxp/expertzone > >> > > >> >> > >> > > >> >> > >> > > >> >> "DaveH" <DaveH@discussions.microsoft.com> wrote in message > >> > > >> >> news:3020CDEE-7BB8-4EAF-9CB9-502DB145F561@microsoft.com... > >> > > >> >> > One other dumb question - what's the significance of doing > >> > > >> >> > this in > >> > > >> >> > Safe > >> > > >> >> > Mode? > >> > > >> >> > > >> > > >> >> > "Chris H." wrote: > >> > > >> >> > > >> > > >> >> >> No, don't uninstall it. Try reinstalling your graphics > >> > > >> >> >> driver, > >> > > >> >> >> even > >> > > >> >> >> if > >> > > >> >> >> you > >> > > >> >> >> need to do it in Safe Mode. > >> > > >> >> >> -- > >> > > >> >> >> Chris H. > >> > > >> >> >> Microsoft Windows MVP/Tablet PC > >> > > >> >> >> Tablet Creations - http://nicecreations.us/ > >> > > >> >> >> Associate Expert > >> > > >> >> >> Expert Zone - www.microsoft.com/windowsxp/expertzone > >> > > >> >> >> > >> > > >> >> >> > >> > > >> >> >> "DaveH" <DaveH@discussions.microsoft.com> wrote in message > >> > > >> >> >> news:9D11AC40-6C8B-4B5D-B78A-C2BD16CD4A6B@microsoft.com... > >> > > >> >> >> > Chris > >> > > >> >> >> > > >> > > >> >> >> > I downloaded the "enhanced pen driver" from Wacom and > >> > > >> >> >> > installed > >> > > >> >> >> > it....no > >> > > >> >> >> > effect. I can run the Tablet & Pen Settings uitlity along > >> > > >> >> >> > with > >> > > >> >> >> > the > >> > > >> >> >> > Wacom > >> > > >> >> >> > Tablet Properties utility - but the Input Panel still > >> > > >> >> >> > won't > >> > > >> >> >> > launch. > >> > > >> >> >> > > >> > > >> >> >> > I have a horrible feeling I'm going to have to uninstall > >> > > >> >> >> > SP2... > >> > > >> >> >> > > >> > > >> >> >> > "Chris H." wrote: > >> > > >> >> >> > > >> > > >> >> >> >> Dave, try installing the Wacom driver for your pen from > >> > > >> >> >> >> www.wacom.com. > >> > > >> >> >> >> It > >> > > >> >> >> >> has solved several issues. > >> > > >> >> >> >> -- > >> > > >> >> >> >> Chris H. > >> > > >> >> >> >> Microsoft Windows MVP/Tablet PC > >> > > >> >> >> >> Tablet Creations - http://nicecreations.us/ > >> > > >> >> >> >> Associate Expert > >> > > >> >> >> >> Expert Zone - www.microsoft.com/windowsxp/expertzone > >> > > >> >> >> >> > >> > > >> >> >> >> > >> > > >> >> >> >> "DaveH" <DaveH@discussions.microsoft.com> wrote in > >> > > >> >> >> >> message > >> > > >> >> >> >> news:3052BB04-54F9-4A7B-9654-02A0D45DCD62@microsoft.com... > >> > > >> >> >> >> > I've recently upgraded to SP2 and the Tablet PC Input > >> > > >> >> >> >> > Panel no > >> > > >> >> >> >> > longer > >> > > >> >> >> >> > works. > >> > > >> >> >> >> > The icon is there on the taskbar but clicking it has no > >> > > >> >> >> >> > effect. > >> > > >> >> >> >> > The machine is a Toshiba Portege M200 running SP2 and > >> > > >> >> >> >> > Office > >> > > >> >> >> >> > 2003 > >> > > >> >> >> >> > with > >> > > >> >> >> >> > all > >> > > >> >> >> >> > updates applied. > >> > > >> >> >> >> > Anyone any ideas? > >> > > >> >> >> >> > From the other posts in this forum I've registered the > >> > > >> >> >> >> > two > >> > > >> >> >> >> > DLLs > >> > > >> >> >> >> > in > >> > > >> >> >> >> > the > >> > > >> >> >> >> > Ink > >> > > >> >> >> >> > directory successfully but these have had no effect. If > >> > > >> >> >> >> > I need > >> > > >> >> >> >> > to > >> > > >> >> >> >> > reinstall > >> > > >> >> >> >> > drivers, which drivers? > >> > > >> >> >> >> > All help gratefully received... > >> > > >> >> >> >> > >> > > >> >> >> >> > >> > > >> >> >> >> > >> > > >> >> >> > >> > > >> >> >> > >> > > >> >> >> > >> > > >> >> > >> > > >> >> > >> > > >> >> > >> > > >> > >> > > >> > >> > > >> > >> > > > >> > > > >> > > > > > |
|
01-24-2005, 09:15 AM
| |||
| |||
| Re: Input Panel Now here's an interesting thing... I usually use an account on this machine that has Administrator privileges. I just logged on through the proper "Administrator" account. This hadn't been used before so it went through the usual "welcome to XP' stuff. What's interesting is that I brought up a Windows Explorer while using the pen - and the floating Input Panel icon appeared! It took me a while to get it to stay long enough to click on but I was eventually able to bring it up, look at options etc. When I saved the options it crashed and I got an error written to the event log saying that tabtip.exe had failed in module tipskins.dll. The version numbers of both are 1.7.2600.2180. Since then, I've rebooted and logged back into the Administrator account, created a new user and logged on through my normal account - all to no avail, the Input Panel still won't appear....sooooooo tantalisingly close!!! "DaveH" wrote: > Chris > > Thanks...I hope they can suggest something! > > Dave > > "Chris H." wrote: > > > Dave, I've forwarded the error message from earlier today and now await > > Microsoft's response. I'll post back when I hear something, though since it > > is the weekend, I doubt we'll hear another until Monday at the earliest. > > -- > > Chris H. > > Microsoft Windows MVP/Tablet PC > > Tablet Creations - http://nicecreations.us/ > > Associate Expert > > Expert Zone - www.microsoft.com/windowsxp/expertzone > > > > > > "DaveH" <DaveH@discussions.microsoft.com> wrote in message > > news:F3AD5883-BC75-49CC-82DD-938538DC52E3@microsoft.com... > > > Thanks for the suggestions guys.... > > > > > > The event id is 7023. following the link that Jan gave, I've found the dll > > > and sys files and moved them as suggested - the Human Interface Device > > > service now starts. > > > > > > I've also tried lanching and closing the "getting going" tutorial and > > > guess > > > what....none of these things have made any difference!! TIP refuses to > > > come > > > up....aaaaargh!! > > > > > > "Dave B." wrote: > > > > > >> I think I have the same problem...try launching and closing the 'get > > >> going > > >> with tablet pc' tutorial...that's how I can get mine to launch. Then I > > >> run > > >> into another problem with tabtip.exe crashing. But see if you can at > > >> least > > >> get it on screen. > > >> > > >> Dave. > > >> > > >> "DaveH" wrote: > > >> > > >> > Don't know if this helps.... > > >> > > > >> > I cleared out the event log and restarted the machine. I get an error > > >> > in the > > >> > System log from the Service Control Manager. "The human interface > > >> > device > > >> > Access service terminated with the following error: The specified > > >> > module > > >> > could not be found" > > >> > > > >> > If I click on the Input Panel icon there are no events written to the > > >> > log so > > >> > this must have come from Startup > > >> > > > >> > > > >> > "Chris H." wrote: > > >> > > > >> > > I know this may sound strange, but hang in there. 8-) You installed > > >> > > Wacom's latest drivers, correct? If so, try going into Control > > >> > > Panel/Add or > > >> > > Remove Programs and uninstall the listing for Wacom Penabled Driver > > >> > > 4.82-9. > > >> > > The actual drivers will remain, but the Wacom entry on All Programs > > >> > > will be > > >> > > removed. Restart your system, and see if the Tablet Input Panel will > > >> > > then > > >> > > launch. > > >> > > -- > > >> > > Chris H. > > >> > > Microsoft Windows MVP/Tablet PC > > >> > > Tablet Creations - http://nicecreations.us/ > > >> > > Associate Expert > > >> > > Expert Zone - www.microsoft.com/windowsxp/expertzone > > >> > > > > >> > > > > >> > > "DaveH" <DaveH@discussions.microsoft.com> wrote in message > > >> > > news:39FB724E-3A5C-4F40-A88A-1A026EF7C911@microsoft.com... > > >> > > > Chris, > > >> > > > > > >> > > > I've checked as you suggest and have .NET Framework 1.1 installed. > > >> > > > > > >> > > > If I watch Task Manager, when I click the Input Panel icon, a > > >> > > > process for > > >> > > > tabtip.exe starts - it's just that nothing shows up. I've rolled > > >> > > > back the > > >> > > > Wacom pen driver back to the Microsoft one but still no joy... > > >> > > > > > >> > > > Dave > > >> > > > "Chris H." wrote: > > >> > > > > > >> > > >> Dave, do you have .NET 1.1 installed? You can check that by going > > >> > > >> into > > >> > > >> Control Panel/Add or Remove Programs and look at the installed > > >> > > >> programs > > >> > > >> list. It should have a listing there for Microsoft .NET Framework > > >> > > >> 1.1. > > >> > > >> If > > >> > > >> it doesn't say exactly that, you should download and install it. > > >> > > >> There's > > >> > > >> more information here: > > >> > > >> http://msdn.microsoft.com/netframewo.../framework1_1/ . > > >> > > >> -- > > >> > > >> Chris H. > > >> > > >> Microsoft Windows MVP/Tablet PC > > >> > > >> Tablet Creations - http://nicecreations.us/ > > >> > > >> Associate Expert > > >> > > >> Expert Zone - www.microsoft.com/windowsxp/expertzone > > >> > > >> > > >> > > >> > > >> > > >> "DaveH" <DaveH@discussions.microsoft.com> wrote in message > > >> > > >> news:329A9B3D-62CE-495B-942E-CD8CCFC71126@microsoft.com... > > >> > > >> > Chris > > >> > > >> > > > >> > > >> > Makes sense - thanks. I've done that and guess what....no > > >> > > >> > difference. > > >> > > >> > > > >> > > >> > This definitely used to work before I put SP2 on... > > >> > > >> > > > >> > > >> > Still grateful for any other insights anyone might have > > >> > > >> > > > >> > > >> > Thanks > > >> > > >> > > > >> > > >> > Dave > > >> > > >> > > > >> > > >> > "Chris H." wrote: > > >> > > >> > > > >> > > >> >> In Safe Mode, only "generic" drivers are functional, so the > > >> > > >> >> current > > >> > > >> >> graphics > > >> > > >> >> driver will not be running. It is more efficient to uninstall > > >> > > >> >> non-operational drivers and replace them, then trying to > > >> > > >> >> uninstall/replace > > >> > > >> >> those in use. > > >> > > >> >> -- > > >> > > >> >> Chris H. > > >> > > >> >> Microsoft Windows MVP/Tablet PC > > >> > > >> >> Tablet Creations - http://nicecreations.us/ > > >> > > >> >> Associate Expert > > >> > > >> >> Expert Zone - www.microsoft.com/windowsxp/expertzone > > >> > > >> >> > > >> > > >> >> > > >> > > >> >> "DaveH" <DaveH@discussions.microsoft.com> wrote in message > > >> > > >> >> news:3020CDEE-7BB8-4EAF-9CB9-502DB145F561@microsoft.com... > > >> > > >> >> > One other dumb question - what's the significance of doing > > >> > > >> >> > this in > > >> > > >> >> > Safe > > >> > > >> >> > Mode? > > >> > > >> >> > > > >> > > >> >> > "Chris H." wrote: > > >> > > >> >> > > > >> > > >> >> >> No, don't uninstall it. Try reinstalling your graphics > > >> > > >> >> >> driver, > > >> > > >> >> >> even > > >> > > >> >> >> if > > >> > > >> >> >> you > > >> > > >> >> >> need to do it in Safe Mode. > > >> > > >> >> >> -- > > >> > > >> >> >> Chris H. > > >> > > >> >> >> Microsoft Windows MVP/Tablet PC > > >> > > >> >> >> Tablet Creations - http://nicecreations.us/ > > >> > > >> >> >> Associate Expert > > >> > > >> >> >> Expert Zone - www.microsoft.com/windowsxp/expertzone > > >> > > >> >> >> > > >> > > >> >> >> > > >> > > >> >> >> "DaveH" <DaveH@discussions.microsoft.com> wrote in message > > >> > > >> >> >> news:9D11AC40-6C8B-4B5D-B78A-C2BD16CD4A6B@microsoft.com... > > >> > > >> >> >> > Chris > > >> > > >> >> >> > > > >> > > >> >> >> > I downloaded the "enhanced pen driver" from Wacom and > > >> > > >> >> >> > installed > > >> > > >> >> >> > it....no > > >> > > >> >> >> > effect. I can run the Tablet & Pen Settings uitlity along > > >> > > >> >> >> > with > > >> > > >> >> >> > the > > >> > > >> >> >> > Wacom > > >> > > >> >> >> > Tablet Properties utility - but the Input Panel still > > >> > > >> >> >> > won't > > >> > > >> >> >> > launch. > > >> > > >> >> >> > > > >> > > >> >> >> > I have a horrible feeling I'm going to have to uninstall > > >> > > >> >> >> > SP2... > > >> > > >> >> >> > > > >> > > >> >> >> > "Chris H." wrote: > > >> > > >> >> >> > > > >> > > >> >> >> >> Dave, try installing the Wacom driver for your pen from > > >> > > >> >> >> >> www.wacom.com. > > >> > > >> >> >> >> It > > >> > > >> >> >> >> has solved several issues. > > >> > > >> >> >> >> -- > > >> > > >> >> >> >> Chris H. > > >> > > >> >> >> >> Microsoft Windows MVP/Tablet PC > > >> > > >> >> >> >> Tablet Creations - http://nicecreations.us/ > > >> > > >> >> >> >> Associate Expert > > >> > > >> >> >> >> Expert Zone - www.microsoft.com/windowsxp/expertzone > > >> > > >> >> >> >> > > >> > > >> >> >> >> > > >> > > >> >> >> >> "DaveH" <DaveH@discussions.microsoft.com> wrote in > > >> > > >> >> >> >> message > > >> > > >> >> >> >> news:3052BB04-54F9-4A7B-9654-02A0D45DCD62@microsoft.com... > > >> > > >> >> >> >> > I've recently upgraded to SP2 and the Tablet PC Input > > >> > > >> >> >> >> > Panel no > > >> > > >> >> >> >> > longer > > >> > > >> >> >> >> > works. > > >> > > >> >> >> >> > The icon is there on the taskbar but clicking it has no > > >> > > >> >> >> >> > effect. > > >> > > >> >> >> >> > The machine is a Toshiba Portege M200 running SP2 and > > >> > > >> >> >> >> > Office > > >> > > >> >> >> >> > 2003 > > >> > > >> >> >> >> > with > > >> > > >> >> >> >> > all > > >> > > >> >> >> >> > updates applied. > > >> > > >> >> >> >> > Anyone any ideas? > > >> > > >> >> >> >> > From the other posts in this forum I've registered the > > >> > > >> >> >> >> > two > > >> > > >> >> >> >> > DLLs > > >> > > >> >> >> >> > in > > >> > > >> >> >> >> > the > > >> > > >> >> >> >> > Ink > > >> > > >> >> >> >> > directory successfully but these have had no effect. If > > >> > > >> >> >> >> > I need > > >> > > >> >> >> >> > to > > >> > > >> >> >> >> > reinstall > > >> > > >> >> >> >> > drivers, which drivers? > > >> > > >> >> >> >> > All help gratefully received... > > >> > > >> >> >> >> > > >> > > >> >> >> >> > > >> > > >> >> >> >> > > >> > > >> >> >> > > >> > > >> >> >> > > >> > > >> >> >> > > >> > > >> >> > > >> > > >> >> > > >> > > >> >> > > >> > > >> > > >> > > >> > > >> > > >> > > >> > > > > >> > > > > >> > > > > > > > > |
|
01-24-2005, 09:15 AM
| |||
| |||
| Re: Input Panel It is pointing to a file being corrupt in there, Dave. Since nothing back from Microsoft, but it is early on Monday morning. 8-) -- Chris H. Microsoft Windows MVP/Tablet PC Tablet Creations - http://nicecreations.us/ Associate Expert Expert Zone - www.microsoft.com/windowsxp/expertzone "DaveH" <DaveH@discussions.microsoft.com> wrote in message news:B438B144-0CB5-4E57-8030-E81C752DDD56@microsoft.com... > Now here's an interesting thing... > I usually use an account on this machine that has Administrator > privileges. > I just logged on through the proper "Administrator" account. This hadn't > been > used before so it went through the usual "welcome to XP' stuff. What's > interesting is that I brought up a Windows Explorer while using the pen - > and > the floating Input Panel icon appeared! It took me a while to get it to > stay > long enough to click on but I was eventually able to bring it up, look at > options etc. > > When I saved the options it crashed and I got an error written to the > event > log saying that tabtip.exe had failed in module tipskins.dll. The version > numbers of both are 1.7.2600.2180. > Since then, I've rebooted and logged back into the Administrator account, > created a new user and logged on through my normal account - all to no > avail, > the Input Panel still won't appear....sooooooo tantalisingly close!!! > > "DaveH" wrote: > >> Chris >> >> Thanks...I hope they can suggest something! >> >> Dave >> >> "Chris H." wrote: >> >> > Dave, I've forwarded the error message from earlier today and now await >> > Microsoft's response. I'll post back when I hear something, though >> > since it >> > is the weekend, I doubt we'll hear another until Monday at the >> > earliest. >> > -- >> > Chris H. >> > Microsoft Windows MVP/Tablet PC >> > Tablet Creations - http://nicecreations.us/ >> > Associate Expert >> > Expert Zone - www.microsoft.com/windowsxp/expertzone >> > >> > >> > "DaveH" <DaveH@discussions.microsoft.com> wrote in message >> > news:F3AD5883-BC75-49CC-82DD-938538DC52E3@microsoft.com... >> > > Thanks for the suggestions guys.... >> > > >> > > The event id is 7023. following the link that Jan gave, I've found >> > > the dll >> > > and sys files and moved them as suggested - the Human Interface >> > > Device >> > > service now starts. >> > > >> > > I've also tried lanching and closing the "getting going" tutorial and >> > > guess >> > > what....none of these things have made any difference!! TIP refuses >> > > to >> > > come >> > > up....aaaaargh!! >> > > >> > > "Dave B." wrote: >> > > >> > >> I think I have the same problem...try launching and closing the 'get >> > >> going >> > >> with tablet pc' tutorial...that's how I can get mine to launch. >> > >> Then I >> > >> run >> > >> into another problem with tabtip.exe crashing. But see if you can at >> > >> least >> > >> get it on screen. >> > >> >> > >> Dave. >> > >> >> > >> "DaveH" wrote: >> > >> >> > >> > Don't know if this helps.... >> > >> > >> > >> > I cleared out the event log and restarted the machine. I get an >> > >> > error >> > >> > in the >> > >> > System log from the Service Control Manager. "The human interface >> > >> > device >> > >> > Access service terminated with the following error: The specified >> > >> > module >> > >> > could not be found" >> > >> > >> > >> > If I click on the Input Panel icon there are no events written to >> > >> > the >> > >> > log so >> > >> > this must have come from Startup >> > >> > >> > >> > >> > >> > "Chris H." wrote: >> > >> > >> > >> > > I know this may sound strange, but hang in there. 8-) You >> > >> > > installed >> > >> > > Wacom's latest drivers, correct? If so, try going into Control >> > >> > > Panel/Add or >> > >> > > Remove Programs and uninstall the listing for Wacom Penabled >> > >> > > Driver >> > >> > > 4.82-9. >> > >> > > The actual drivers will remain, but the Wacom entry on All >> > >> > > Programs >> > >> > > will be >> > >> > > removed. Restart your system, and see if the Tablet Input Panel >> > >> > > will >> > >> > > then >> > >> > > launch. >> > >> > > -- >> > >> > > Chris H. >> > >> > > Microsoft Windows MVP/Tablet PC >> > >> > > Tablet Creations - http://nicecreations.us/ >> > >> > > Associate Expert >> > >> > > Expert Zone - www.microsoft.com/windowsxp/expertzone >> > >> > > >> > >> > > >> > >> > > "DaveH" <DaveH@discussions.microsoft.com> wrote in message >> > >> > > news:39FB724E-3A5C-4F40-A88A-1A026EF7C911@microsoft.com... >> > >> > > > Chris, >> > >> > > > >> > >> > > > I've checked as you suggest and have .NET Framework 1.1 >> > >> > > > installed. >> > >> > > > >> > >> > > > If I watch Task Manager, when I click the Input Panel icon, a >> > >> > > > process for >> > >> > > > tabtip.exe starts - it's just that nothing shows up. I've >> > >> > > > rolled >> > >> > > > back the >> > >> > > > Wacom pen driver back to the Microsoft one but still no joy... >> > >> > > > >> > >> > > > Dave >> > >> > > > "Chris H." wrote: >> > >> > > > >> > >> > > >> Dave, do you have .NET 1.1 installed? You can check that by >> > >> > > >> going >> > >> > > >> into >> > >> > > >> Control Panel/Add or Remove Programs and look at the >> > >> > > >> installed >> > >> > > >> programs >> > >> > > >> list. It should have a listing there for Microsoft .NET >> > >> > > >> Framework >> > >> > > >> 1.1. >> > >> > > >> If >> > >> > > >> it doesn't say exactly that, you should download and install >> > >> > > >> it. >> > >> > > >> There's >> > >> > > >> more information here: >> > >> > > >> http://msdn.microsoft.com/netframewo.../framework1_1/ . >> > >> > > >> -- >> > >> > > >> Chris H. >> > >> > > >> Microsoft Windows MVP/Tablet PC >> > >> > > >> Tablet Creations - http://nicecreations.us/ >> > >> > > >> Associate Expert >> > >> > > >> Expert Zone - www.microsoft.com/windowsxp/expertzone >> > >> > > >> >> > >> > > >> >> > >> > > >> "DaveH" <DaveH@discussions.microsoft.com> wrote in message >> > >> > > >> news:329A9B3D-62CE-495B-942E-CD8CCFC71126@microsoft.com... >> > >> > > >> > Chris >> > >> > > >> > >> > >> > > >> > Makes sense - thanks. I've done that and guess what....no >> > >> > > >> > difference. >> > >> > > >> > >> > >> > > >> > This definitely used to work before I put SP2 on... >> > >> > > >> > >> > >> > > >> > Still grateful for any other insights anyone might have >> > >> > > >> > >> > >> > > >> > Thanks >> > >> > > >> > >> > >> > > >> > Dave >> > >> > > >> > >> > >> > > >> > "Chris H." wrote: >> > >> > > >> > >> > >> > > >> >> In Safe Mode, only "generic" drivers are functional, so >> > >> > > >> >> the >> > >> > > >> >> current >> > >> > > >> >> graphics >> > >> > > >> >> driver will not be running. It is more efficient to >> > >> > > >> >> uninstall >> > >> > > >> >> non-operational drivers and replace them, then trying to >> > >> > > >> >> uninstall/replace >> > >> > > >> >> those in use. >> > >> > > >> >> -- >> > >> > > >> >> Chris H. >> > >> > > >> >> Microsoft Windows MVP/Tablet PC >> > >> > > >> >> Tablet Creations - http://nicecreations.us/ >> > >> > > >> >> Associate Expert >> > >> > > >> >> Expert Zone - www.microsoft.com/windowsxp/expertzone >> > >> > > >> >> >> > >> > > >> >> >> > >> > > >> >> "DaveH" <DaveH@discussions.microsoft.com> wrote in message >> > >> > > >> >> news:3020CDEE-7BB8-4EAF-9CB9-502DB145F561@microsoft.com... >> > >> > > >> >> > One other dumb question - what's the significance of >> > >> > > >> >> > doing >> > >> > > >> >> > this in >> > >> > > >> >> > Safe >> > >> > > >> >> > Mode? >> > >> > > >> >> > >> > >> > > >> >> > "Chris H." wrote: >> > >> > > >> >> > >> > >> > > >> >> >> No, don't uninstall it. Try reinstalling your graphics >> > >> > > >> >> >> driver, >> > >> > > >> >> >> even >> > >> > > >> >> >> if >> > >> > > >> >> >> you >> > >> > > >> >> >> need to do it in Safe Mode. >> > >> > > >> >> >> -- >> > >> > > >> >> >> Chris H. >> > >> > > >> >> >> Microsoft Windows MVP/Tablet PC >> > >> > > >> >> >> Tablet Creations - http://nicecreations.us/ >> > >> > > >> >> >> Associate Expert >> > >> > > >> >> >> Expert Zone - www.microsoft.com/windowsxp/expertzone >> > >> > > >> >> >> >> > >> > > >> >> >> >> > >> > > >> >> >> "DaveH" <DaveH@discussions.microsoft.com> wrote in >> > >> > > >> >> >> message >> > >> > > >> >> >> news:9D11AC40-6C8B-4B5D-B78A-C2BD16CD4A6B@microsoft.com... >> > >> > > >> >> >> > Chris >> > >> > > >> >> >> > >> > >> > > >> >> >> > I downloaded the "enhanced pen driver" from Wacom and >> > >> > > >> >> >> > installed >> > >> > > >> >> >> > it....no >> > >> > > >> >> >> > effect. I can run the Tablet & Pen Settings uitlity >> > >> > > >> >> >> > along >> > >> > > >> >> >> > with >> > >> > > >> >> >> > the >> > >> > > >> >> >> > Wacom >> > >> > > >> >> >> > Tablet Properties utility - but the Input Panel still >> > >> > > >> >> >> > won't >> > >> > > >> >> >> > launch. >> > >> > > >> >> >> > >> > >> > > >> >> >> > I have a horrible feeling I'm going to have to >> > >> > > >> >> >> > uninstall >> > >> > > >> >> >> > SP2... >> > >> > > >> >> >> > >> > >> > > >> >> >> > "Chris H." wrote: >> > >> > > >> >> >> > >> > >> > > >> >> >> >> Dave, try installing the Wacom driver for your pen >> > >> > > >> >> >> >> from >> > >> > > >> >> >> >> www.wacom.com. >> > >> > > >> >> >> >> It >> > >> > > >> >> >> >> has solved several issues. >> > >> > > >> >> >> >> -- >> > >> > > >> >> >> >> Chris H. >> > >> > > >> >> >> >> Microsoft Windows MVP/Tablet PC >> > >> > > >> >> >> >> Tablet Creations - http://nicecreations.us/ >> > >> > > >> >> >> >> Associate Expert >> > >> > > >> >> >> >> Expert Zone - www.microsoft.com/windowsxp/expertzone >> > >> > > >> >> >> >> >> > >> > > >> >> >> >> >> > >> > > >> >> >> >> "DaveH" <DaveH@discussions.microsoft.com> wrote in >> > >> > > >> >> >> >> message >> > >> > > >> >> >> >> news:3052BB04-54F9-4A7B-9654-02A0D45DCD62@microsoft.com... >> > >> > > >> >> >> >> > I've recently upgraded to SP2 and the Tablet PC >> > >> > > >> >> >> >> > Input >> > >> > > >> >> >> >> > Panel no >> > >> > > >> >> >> >> > longer >> > >> > > >> >> >> >> > works. >> > >> > > >> >> >> >> > The icon is there on the taskbar but clicking it >> > >> > > >> >> >> >> > has no >> > >> > > >> >> >> >> > effect. >> > >> > > >> >> >> >> > The machine is a Toshiba Portege M200 running SP2 >> > >> > > >> >> >> >> > and >> > >> > > >> >> >> >> > Office >> > >> > > >> >> >> >> > 2003 >> > >> > > >> >> >> >> > with >> > >> > > >> >> >> >> > all >> > >> > > >> >> >> >> > updates applied. >> > >> > > >> >> >> >> > Anyone any ideas? >> > >> > > >> >> >> >> > From the other posts in this forum I've registered >> > >> > > >> >> >> >> > the >> > >> > > >> >> >> >> > two >> > >> > > >> >> >> >> > DLLs >> > >> > > >> >> >> >> > in >> > >> > > >> >> >> >> > the >> > >> > > >> >> >> >> > Ink >> > >> > > >> >> >> >> > directory successfully but these have had no >> > >> > > >> >> >> >> > effect. If >> > >> > > >> >> >> >> > I need >> > >> > > >> >> >> >> > to >> > >> > > >> >> >> >> > reinstall >> > >> > > >> >> >> >> > drivers, which drivers? >> > >> > > >> >> >> >> > All help gratefully received... >> > >> > > >> >> >> >> >> > >> > > >> >> >> >> >> > >> > > >> >> >> >> >> > >> > > >> >> >> >> > >> > > >> >> >> >> > >> > > >> >> >> >> > >> > > >> >> >> > >> > > >> >> >> > >> > > >> >> >> > >> > > >> >> > >> > > >> >> > >> > > >> >> > >> > > >> > >> > > >> > >> > > >> > >> > >> > |
|
01-27-2005, 05:17 AM
| |||
| |||
| Re: Input Panel Chris Any word from Microsoft? Is it a corrupt file or do you think it could be a registry entry that's corrupt? Cheers Dave "Chris H." wrote: > It is pointing to a file being corrupt in there, Dave. Since nothing back > from Microsoft, but it is early on Monday morning. 8-) > -- > Chris H. > Microsoft Windows MVP/Tablet PC > Tablet Creations - http://nicecreations.us/ > Associate Expert > Expert Zone - www.microsoft.com/windowsxp/expertzone > > > "DaveH" <DaveH@discussions.microsoft.com> wrote in message > news:B438B144-0CB5-4E57-8030-E81C752DDD56@microsoft.com... > > Now here's an interesting thing... > > I usually use an account on this machine that has Administrator > > privileges. > > I just logged on through the proper "Administrator" account. This hadn't > > been > > used before so it went through the usual "welcome to XP' stuff. What's > > interesting is that I brought up a Windows Explorer while using the pen - > > and > > the floating Input Panel icon appeared! It took me a while to get it to > > stay > > long enough to click on but I was eventually able to bring it up, look at > > options etc. > > > > When I saved the options it crashed and I got an error written to the > > event > > log saying that tabtip.exe had failed in module tipskins.dll. The version > > numbers of both are 1.7.2600.2180. > > Since then, I've rebooted and logged back into the Administrator account, > > created a new user and logged on through my normal account - all to no > > avail, > > the Input Panel still won't appear....sooooooo tantalisingly close!!! > > > > "DaveH" wrote: > > > >> Chris > >> > >> Thanks...I hope they can suggest something! > >> > >> Dave > >> > >> "Chris H." wrote: > >> > >> > Dave, I've forwarded the error message from earlier today and now await > >> > Microsoft's response. I'll post back when I hear something, though > >> > since it > >> > is the weekend, I doubt we'll hear another until Monday at the > >> > earliest. > >> > -- > >> > Chris H. > >> > Microsoft Windows MVP/Tablet PC > >> > Tablet Creations - http://nicecreations.us/ > >> > Associate Expert > >> > Expert Zone - www.microsoft.com/windowsxp/expertzone > >> > > >> > > >> > "DaveH" <DaveH@discussions.microsoft.com> wrote in message > >> > news:F3AD5883-BC75-49CC-82DD-938538DC52E3@microsoft.com... > >> > > Thanks for the suggestions guys.... > >> > > > >> > > The event id is 7023. following the link that Jan gave, I've found > >> > > the dll > >> > > and sys files and moved them as suggested - the Human Interface > >> > > Device > >> > > service now starts. > >> > > > >> > > I've also tried lanching and closing the "getting going" tutorial and > >> > > guess > >> > > what....none of these things have made any difference!! TIP refuses > >> > > to > >> > > come > >> > > up....aaaaargh!! > >> > > > >> > > "Dave B." wrote: > >> > > > >> > >> I think I have the same problem...try launching and closing the 'get > >> > >> going > >> > >> with tablet pc' tutorial...that's how I can get mine to launch. > >> > >> Then I > >> > >> run > >> > >> into another problem with tabtip.exe crashing. But see if you can at > >> > >> least > >> > >> get it on screen. > >> > >> > >> > >> Dave. > >> > >> > >> > >> "DaveH" wrote: > >> > >> > >> > >> > Don't know if this helps.... > >> > >> > > >> > >> > I cleared out the event log and restarted the machine. I get an > >> > >> > error > >> > >> > in the > >> > >> > System log from the Service Control Manager. "The human interface > >> > >> > device > >> > >> > Access service terminated with the following error: The specified > >> > >> > module > >> > >> > could not be found" > >> > >> > > >> > >> > If I click on the Input Panel icon there are no events written to > >> > >> > the > >> > >> > log so > >> > >> > this must have come from Startup > >> > >> > > >> > >> > > >> > >> > "Chris H." wrote: > >> > >> > > >> > >> > > I know this may sound strange, but hang in there. 8-) You > >> > >> > > installed > >> > >> > > Wacom's latest drivers, correct? If so, try going into Control > >> > >> > > Panel/Add or > >> > >> > > Remove Programs and uninstall the listing for Wacom Penabled > >> > >> > > Driver > >> > >> > > 4.82-9. > >> > >> > > The actual drivers will remain, but the Wacom entry on All > >> > >> > > Programs > >> > >> > > will be > >> > >> > > removed. Restart your system, and see if the Tablet Input Panel > >> > >> > > will > >> > >> > > then > >> > >> > > launch. > >> > >> > > -- > >> > >> > > Chris H. > >> > >> > > Microsoft Windows MVP/Tablet PC > >> > >> > > Tablet Creations - http://nicecreations.us/ > >> > >> > > Associate Expert > >> > >> > > Expert Zone - www.microsoft.com/windowsxp/expertzone > >> > >> > > > >> > >> > > > >> > >> > > "DaveH" <DaveH@discussions.microsoft.com> wrote in message > >> > >> > > news:39FB724E-3A5C-4F40-A88A-1A026EF7C911@microsoft.com... > >> > >> > > > Chris, > >> > >> > > > > >> > >> > > > I've checked as you suggest and have .NET Framework 1.1 > >> > >> > > > installed. > >> > >> > > > > >> > >> > > > If I watch Task Manager, when I click the Input Panel icon, a > >> > >> > > > process for > >> > >> > > > tabtip.exe starts - it's just that nothing shows up. I've > >> > >> > > > rolled > >> > >> > > > back the > >> > >> > > > Wacom pen driver back to the Microsoft one but still no joy... > >> > >> > > > > >> > >> > > > Dave > >> > >> > > > "Chris H." wrote: > >> > >> > > > > >> > >> > > >> Dave, do you have .NET 1.1 installed? You can check that by > >> > >> > > >> going > >> > >> > > >> into > >> > >> > > >> Control Panel/Add or Remove Programs and look at the > >> > >> > > >> installed > >> > >> > > >> programs > >> > >> > > >> list. It should have a listing there for Microsoft .NET > >> > >> > > >> Framework > >> > >> > > >> 1.1. > >> > >> > > >> If > >> > >> > > >> it doesn't say exactly that, you should download and install > >> > >> > > >> it. > >> > >> > > >> There's > >> > >> > > >> more information here: > >> > >> > > >> http://msdn.microsoft.com/netframewo.../framework1_1/ . > >> > >> > > >> -- > >> > >> > > >> Chris H. > >> > >> > > >> Microsoft Windows MVP/Tablet PC > >> > >> > > >> Tablet Creations - http://nicecreations.us/ > >> > >> > > >> Associate Expert > >> > >> > > >> Expert Zone - www.microsoft.com/windowsxp/expertzone > >> > >> > > >> > >> > >> > > >> > >> > >> > > >> "DaveH" <DaveH@discussions.microsoft.com> wrote in message > >> > >> > > >> news:329A9B3D-62CE-495B-942E-CD8CCFC71126@microsoft.com... > >> > >> > > >> > Chris > >> > >> > > >> > > >> > >> > > >> > Makes sense - thanks. I've done that and guess what....no > >> > >> > > >> > difference. > >> > >> > > >> > > >> > >> > > >> > This definitely used to work before I put SP2 on... > >> > >> > > >> > > >> > >> > > >> > Still grateful for any other insights anyone might have > >> > >> > > >> > > >> > >> > > >> > Thanks > >> > >> > > >> > > >> > >> > > >> > Dave > >> > >> > > >> > > >> > >> > > >> > "Chris H." wrote: > >> > >> > > >> > > >> > >> > > >> >> In Safe Mode, only "generic" drivers are functional, so > >> > >> > > >> >> the > >> > >> > > >> >> current > >> > >> > > >> >> graphics > >> > >> > > >> >> driver will not be running. It is more efficient to > >> > >> > > >> >> uninstall > >> > >> > > >> >> non-operational drivers and replace them, then trying to > >> > >> > > >> >> uninstall/replace > >> > >> > > >> >> those in use. > >> > >> > > >> >> -- > >> > >> > > >> >> Chris H. > >> > >> > > >> >> Microsoft Windows MVP/Tablet PC > >> > >> > > >> >> Tablet Creations - http://nicecreations.us/ > >> > >> > > >> >> Associate Expert > >> > >> > > >> >> Expert Zone - www.microsoft.com/windowsxp/expertzone > >> > >> > > >> >> > >> > >> > > >> >> > >> > >> > > >> >> "DaveH" <DaveH@discussions.microsoft.com> wrote in message > >> > >> > > >> >> news:3020CDEE-7BB8-4EAF-9CB9-502DB145F561@microsoft.com... > >> > >> > > >> >> > One other dumb question - what's the significance of > >> > >> > > >> >> > doing > >> > >> > > >> >> > this in > >> > >> > > >> >> > Safe > >> > >> > > >> >> > Mode? > >> > >> > > >> >> > > >> > >> > > >> >> > "Chris H." wrote: > >> > >> > > >> >> > > >> > >> > > >> >> >> No, don't uninstall it. Try reinstalling your graphics > >> > >> > > >> >> >> driver, > >> > >> > > >> >> >> even > >> > >> > > >> >> >> if > >> > >> > > >> >> >> you > >> > >> > > >> >> >> need to do it in Safe Mode. > >> > >> > > >> >> >> -- > >> > >> > > >> >> >> Chris H. > >> > >> > > >> >> >> Microsoft Windows MVP/Tablet PC > >> > >> > > >> >> >> Tablet Creations - http://nicecreations.us/ > >> > >> > > >> >> >> Associate Expert > >> > >> > > >> >> >> Expert Zone - www.microsoft.com/windowsxp/expertzone > >> > >> > > >> >> >> > >> > >> > > >> >> >> > >> > >> > > >> >> >> "DaveH" <DaveH@discussions.microsoft.com> wrote in > >> > >> > > >> >> >> message > >> > >> > > >> >> >> news:9D11AC40-6C8B-4B5D-B78A-C2BD16CD4A6B@microsoft.com... > >> > >> > > >> >> >> > Chris > >> > >> > > >> >> >> > > >> > >> > > >> >> >> > I downloaded the "enhanced pen driver" from Wacom and > >> > >> > > >> >> >> > installed > >> > >> > > >> >> >> > it....no > >> > >> > > >> >> >> > effect. I can run the Tablet & Pen Settings uitlity > >> > >> > > >> >> >> > along > >> > >> > > >> >> >> > with > >> > >> > > >> >> >> > the > >> > >> > > >> >> >> > Wacom > >> > >> > > >> >> >> > Tablet Properties utility - but the Input Panel still > >> > >> > > >> >> >> > won't > >> > >> > > >> >> >> > launch. > >> > >> > > >> >> >> > > >> > >> > > >> >> >> > I have a horrible feeling I'm going to have to > >> > >> > > >> >> >> > uninstall > >> > >> > > >> >> >> > SP2... > >> > >> > > >> >> >> > > >> > >> > > >> >> >> > "Chris H." wrote: > >> > >> > > >> >> >> > > >> > >> > > >> >> >> >> Dave, try installing the Wacom driver for your pen > >> > >> > > >> >> >> >> from > >> > >> > > >> >> >> >> www.wacom.com. > >> > >> > > >> >> >> >> It > >> > >> > > >> >> >> >> has solved several issues. > >> > >> > > >> >> >> >> -- > >> > >> > > >> >> >> >> Chris H. > >> > >> > > >> >> >> >> Microsoft Windows MVP/Tablet PC > >> > >> > > >> >> >> >> Tablet Creations - http://nicecreations.us/ > >> > >> > > >> >> >> >> Associate Expert > >> > >> > > >> >> >> >> Expert Zone - www.microsoft.com/windowsxp/expertzone > >> > >> > > >> >> >> >> > >> > >> > > >> >> >> >> > >> > >> > > >> >> >> >> "DaveH" <DaveH@discussions.microsoft.com> wrote in > >> > >> > > >> >> >> >> message > >> > >> > > >> >> >> >> news:3052BB04-54F9-4A7B-9654-02A0D45DCD62@microsoft.com... > >> > >> > > >> >> >> >> > I've recently upgraded to SP2 and the Tablet PC > >> > >> > > >> >> >> >> > Input > >> > >> > > >> >> >> >> > Panel no > >> > >> > > >> >> >> >> > longer > >> > >> > > >> >> >> >> > works. > >> > >> > > >> >> >> >> > The icon is there on the taskbar but clicking it > >> > >> > > >> >> >> >> > has no > >> > >> > > >> >> >> >> > effect. > >> > >> > > >> >> >> >> > The machine is a Toshiba Portege M200 running SP2 > >> > >> > > >> >> >> >> > and > >> > >> > > >> >> >> >> > Office > >> > >> > > >> >> >> >> > 2003 > >> > >> > > >> >> >> >> > with > >> > >> > > >> >> >> >> > all > >> > >> > > >> >> >> >> > updates applied. > >> > >> > > >> >> >> >> > Anyone any ideas? > >> > >> > > >> >> >> >> > From the other posts in this forum I've registered > >> > >> > > >> >> >> >> > the > >> > >> > > >> >> >> >> > two > >> > >> > > >> >> >> >> > DLLs > >> > >> > > >> >> >> >> > in > >> > >> > > >> >> >> >> > the > >> > >> > > >> >> >> >> > Ink > >> > >> > > >> >> >> >> > directory successfully but these have had no > >> > >> > > >> >> >> >> > effect. If > >> > >> > > >> >> >> >> > I need > >> > >> > > >> >> >> >> > to > >> > >> > > >> >> >> >> > reinstall > >> > >> > > >> >> >> >> > drivers, which drivers? > >> > >> > > >> >> >> >> > All help gratefully received... > >> > >> > > >> >> >> >> > >> > >> > > >> >> >> >> > >> > >> > > >> >> >> >> > >> > >> > > >> >> >> > >> > >> > > >> >> >> > >> > >> > > >> >> >> > >> > >> > > >> >> > >> > >> > > >> >> > >> > >> > > >> >> > >> > >> > > >> > >> > >> > > >> > >> > >> > > >> > >> > >> > > > >> > >> > > > >> > >> > > > >> > > >> > > >> > > > > |
|
01-27-2005, 07:15 AM
| |||
| |||
| Re: Input Panel No word yet, Dave. 8-( -- Chris H. Microsoft Windows MVP/Tablet PC Tablet Creations - http://nicecreations.us/ Associate Expert Expert Zone - www.microsoft.com/windowsxp/expertzone "DaveH" <DaveH@discussions.microsoft.com> wrote in message news:B4025600-DA4B-456C-A33B-CA32F4864DA4@microsoft.com... > Chris > > Any word from Microsoft? Is it a corrupt file or do you think it could be > a > registry entry that's corrupt? > > Cheers > > Dave > > "Chris H." wrote: > >> It is pointing to a file being corrupt in there, Dave. Since nothing >> back >> from Microsoft, but it is early on Monday morning. 8-) >> -- >> Chris H. >> Microsoft Windows MVP/Tablet PC >> Tablet Creations - http://nicecreations.us/ >> Associate Expert >> Expert Zone - www.microsoft.com/windowsxp/expertzone >> >> >> "DaveH" <DaveH@discussions.microsoft.com> wrote in message >> news:B438B144-0CB5-4E57-8030-E81C752DDD56@microsoft.com... >> > Now here's an interesting thing... >> > I usually use an account on this machine that has Administrator >> > privileges. >> > I just logged on through the proper "Administrator" account. This >> > hadn't >> > been >> > used before so it went through the usual "welcome to XP' stuff. What's >> > interesting is that I brought up a Windows Explorer while using the >> > pen - >> > and >> > the floating Input Panel icon appeared! It took me a while to get it to >> > stay >> > long enough to click on but I was eventually able to bring it up, look >> > at >> > options etc. >> > >> > When I saved the options it crashed and I got an error written to the >> > event >> > log saying that tabtip.exe had failed in module tipskins.dll. The >> > version >> > numbers of both are 1.7.2600.2180. >> > Since then, I've rebooted and logged back into the Administrator >> > account, >> > created a new user and logged on through my normal account - all to no >> > avail, >> > the Input Panel still won't appear....sooooooo tantalisingly close!!! >> > >> > "DaveH" wrote: >> > >> >> Chris >> >> >> >> Thanks...I hope they can suggest something! >> >> >> >> Dave >> >> >> >> "Chris H." wrote: >> >> >> >> > Dave, I've forwarded the error message from earlier today and now >> >> > await >> >> > Microsoft's response. I'll post back when I hear something, though >> >> > since it >> >> > is the weekend, I doubt we'll hear another until Monday at the >> >> > earliest. >> >> > -- >> >> > Chris H. >> >> > Microsoft Windows MVP/Tablet PC >> >> > Tablet Creations - http://nicecreations.us/ >> >> > Associate Expert >> >> > Expert Zone - www.microsoft.com/windowsxp/expertzone >> >> > >> >> > >> >> > "DaveH" <DaveH@discussions.microsoft.com> wrote in message >> >> > news:F3AD5883-BC75-49CC-82DD-938538DC52E3@microsoft.com... >> >> > > Thanks for the suggestions guys.... >> >> > > >> >> > > The event id is 7023. following the link that Jan gave, I've found >> >> > > the dll >> >> > > and sys files and moved them as suggested - the Human Interface >> >> > > Device >> >> > > service now starts. >> >> > > >> >> > > I've also tried lanching and closing the "getting going" tutorial >> >> > > and >> >> > > guess >> >> > > what....none of these things have made any difference!! TIP >> >> > > refuses >> >> > > to >> >> > > come >> >> > > up....aaaaargh!! >> >> > > >> >> > > "Dave B." wrote: >> >> > > >> >> > >> I think I have the same problem...try launching and closing the >> >> > >> 'get >> >> > >> going >> >> > >> with tablet pc' tutorial...that's how I can get mine to launch. >> >> > >> Then I >> >> > >> run >> >> > >> into another problem with tabtip.exe crashing. But see if you can >> >> > >> at >> >> > >> least >> >> > >> get it on screen. >> >> > >> >> >> > >> Dave. >> >> > >> >> >> > >> "DaveH" wrote: >> >> > >> >> >> > >> > Don't know if this helps.... >> >> > >> > >> >> > >> > I cleared out the event log and restarted the machine. I get an >> >> > >> > error >> >> > >> > in the >> >> > >> > System log from the Service Control Manager. "The human >> >> > >> > interface >> >> > >> > device >> >> > >> > Access service terminated with the following error: The >> >> > >> > specified >> >> > >> > module >> >> > >> > could not be found" >> >> > >> > >> >> > >> > If I click on the Input Panel icon there are no events written >> >> > >> > to >> >> > >> > the >> >> > >> > log so >> >> > >> > this must have come from Startup >> >> > >> > >> >> > >> > >> >> > >> > "Chris H." wrote: >> >> > >> > >> >> > >> > > I know this may sound strange, but hang in there. 8-) You >> >> > >> > > installed >> >> > >> > > Wacom's latest drivers, correct? If so, try going into >> >> > >> > > Control >> >> > >> > > Panel/Add or >> >> > >> > > Remove Programs and uninstall the listing for Wacom Penabled >> >> > >> > > Driver >> >> > >> > > 4.82-9. >> >> > >> > > The actual drivers will remain, but the Wacom entry on All >> >> > >> > > Programs >> >> > >> > > will be >> >> > >> > > removed. Restart your system, and see if the Tablet Input >> >> > >> > > Panel >> >> > >> > > will >> >> > >> > > then >> >> > >> > > launch. >> >> > >> > > -- >> >> > >> > > Chris H. >> >> > >> > > Microsoft Windows MVP/Tablet PC >> >> > >> > > Tablet Creations - http://nicecreations.us/ >> >> > >> > > Associate Expert >> >> > >> > > Expert Zone - www.microsoft.com/windowsxp/expertzone >> >> > >> > > >> >> > >> > > >> >> > >> > > "DaveH" <DaveH@discussions.microsoft.com> wrote in message >> >> > >> > > news:39FB724E-3A5C-4F40-A88A-1A026EF7C911@microsoft.com... >> >> > >> > > > Chris, >> >> > >> > > > >> >> > >> > > > I've checked as you suggest and have .NET Framework 1.1 >> >> > >> > > > installed. >> >> > >> > > > >> >> > >> > > > If I watch Task Manager, when I click the Input Panel icon, >> >> > >> > > > a >> >> > >> > > > process for >> >> > >> > > > tabtip.exe starts - it's just that nothing shows up. I've >> >> > >> > > > rolled >> >> > >> > > > back the >> >> > >> > > > Wacom pen driver back to the Microsoft one but still no >> >> > >> > > > joy... >> >> > >> > > > >> >> > >> > > > Dave >> >> > >> > > > "Chris H." wrote: >> >> > >> > > > >> >> > >> > > >> Dave, do you have .NET 1.1 installed? You can check that >> >> > >> > > >> by >> >> > >> > > >> going >> >> > >> > > >> into >> >> > >> > > >> Control Panel/Add or Remove Programs and look at the >> >> > >> > > >> installed >> >> > >> > > >> programs >> >> > >> > > >> list. It should have a listing there for Microsoft .NET >> >> > >> > > >> Framework >> >> > >> > > >> 1.1. >> >> > >> > > >> If >> >> > >> > > >> it doesn't say exactly that, you should download and >> >> > >> > > >> install >> >> > >> > > >> it. >> >> > >> > > >> There's >> >> > >> > > >> more information here: >> >> > >> > > >> http://msdn.microsoft.com/netframewo.../framework1_1/ . >> >> > >> > > >> -- >> >> > >> > > >> Chris H. >> >> > >> > > >> Microsoft Windows MVP/Tablet PC >> >> > >> > > >> Tablet Creations - http://nicecreations.us/ >> >> > >> > > >> Associate Expert >> >> > >> > > >> Expert Zone - www.microsoft.com/windowsxp/expertzone >> >> > >> > > >> >> >> > >> > > >> >> >> > >> > > >> "DaveH" <DaveH@discussions.microsoft.com> wrote in message >> >> > >> > > >> news:329A9B3D-62CE-495B-942E-CD8CCFC71126@microsoft.com... >> >> > >> > > >> > Chris >> >> > >> > > >> > >> >> > >> > > >> > Makes sense - thanks. I've done that and guess >> >> > >> > > >> > what....no >> >> > >> > > >> > difference. >> >> > >> > > >> > >> >> > >> > > >> > This definitely used to work before I put SP2 on... >> >> > >> > > >> > >> >> > >> > > >> > Still grateful for any other insights anyone might have >> >> > >> > > >> > >> >> > >> > > >> > Thanks >> >> > >> > > >> > >> >> > >> > > >> > Dave >> >> > >> > > >> > >> >> > >> > > >> > "Chris H." wrote: >> >> > >> > > >> > >> >> > >> > > >> >> In Safe Mode, only "generic" drivers are functional, so >> >> > >> > > >> >> the >> >> > >> > > >> >> current >> >> > >> > > >> >> graphics >> >> > >> > > >> >> driver will not be running. It is more efficient to >> >> > >> > > >> >> uninstall >> >> > >> > > >> >> non-operational drivers and replace them, then trying >> >> > >> > > >> >> to >> >> > >> > > >> >> uninstall/replace >> >> > >> > > >> >> those in use. >> >> > >> > > >> >> -- >> >> > >> > > >> >> Chris H. >> >> > >> > > >> >> Microsoft Windows MVP/Tablet PC >> >> > >> > > >> >> Tablet Creations - http://nicecreations.us/ >> >> > >> > > >> >> Associate Expert >> >> > >> > > >> >> Expert Zone - www.microsoft.com/windowsxp/expertzone >> >> > >> > > >> >> >> >> > >> > > >> >> >> >> > >> > > >> >> "DaveH" <DaveH@discussions.microsoft.com> wrote in >> >> > >> > > >> >> message >> >> > >> > > >> >> news:3020CDEE-7BB8-4EAF-9CB9-502DB145F561@microsoft.com... >> >> > >> > > >> >> > One other dumb question - what's the significance of >> >> > >> > > >> >> > doing >> >> > >> > > >> >> > this in >> >> > >> > > >> >> > Safe >> >> > >> > > >> >> > Mode? >> >> > >> > > >> >> > >> >> > >> > > >> >> > "Chris H." wrote: >> >> > >> > > >> >> > >> >> > >> > > >> >> >> No, don't uninstall it. Try reinstalling your >> >> > >> > > >> >> >> graphics >> >> > >> > > >> >> >> driver, >> >> > >> > > >> >> >> even >> >> > >> > > >> >> >> if >> >> > >> > > >> >> >> you >> >> > >> > > >> >> >> need to do it in Safe Mode. >> >> > >> > > >> >> >> -- >> >> > >> > > >> >> >> Chris H. >> >> > >> > > >> >> >> Microsoft Windows MVP/Tablet PC >> >> > >> > > >> >> >> Tablet Creations - http://nicecreations.us/ >> >> > >> > > >> >> >> Associate Expert >> >> > >> > > >> >> >> Expert Zone - www.microsoft.com/windowsxp/expertzone >> >> > >> > > >> >> >> >> >> > >> > > >> >> >> >> >> > >> > > >> >> >> "DaveH" <DaveH@discussions.microsoft.com> wrote in >> >> > >> > > >> >> >> message >> >> > >> > > >> >> >> news:9D11AC40-6C8B-4B5D-B78A-C2BD16CD4A6B@microsoft.com... >> >> > >> > > >> >> >> > Chris >> >> > >> > > >> >> >> > >> >> > >> > > >> >> >> > I downloaded the "enhanced pen driver" from Wacom >> >> > >> > > >> >> >> > and >> >> > >> > > >> >> >> > installed >> >> > >> > > >> >> >> > it....no >> >> > >> > > >> >> >> > effect. I can run the Tablet & Pen Settings >> >> > >> > > >> >> >> > uitlity >> >> > >> > > >> >> >> > along >> >> > >> > > >> >> >> > with >> >> > >> > > >> >> >> > the >> >> > >> > > >> >> >> > Wacom >> >> > >> > > >> >> >> > Tablet Properties utility - but the Input Panel >> >> > >> > > >> >> >> > still >> >> > >> > > >> >> >> > won't >> >> > >> > > >> >> >> > launch. >> >> > >> > > >> >> >> > >> >> > >> > > >> >> >> > I have a horrible feeling I'm going to have to >> >> > >> > > >> >> >> > uninstall >> >> > >> > > >> >> >> > SP2... >> >> > >> > > >> >> >> > >> >> > >> > > >> >> >> > "Chris H." wrote: >> >> > >> > > >> >> >> > >> >> > >> > > >> >> >> >> Dave, try installing the Wacom driver for your >> >> > >> > > >> >> >> >> pen >> >> > >> > > >> >> >> >> from >> >> > >> > > >> >> >> >> www.wacom.com. >> >> > >> > > >> >> >> >> It >> >> > >> > > >> >> >> >> has solved several issues. >> >> > >> > > >> >> >> >> -- >> >> > >> > > >> >> >> >> Chris H. >> >> > >> > > >> >> >> >> Microsoft Windows MVP/Tablet PC >> >> > >> > > >> >> >> >> Tablet Creations - http://nicecreations.us/ >> >> > >> > > >> >> >> >> Associate Expert >> >> > >> > > >> >> >> >> Expert Zone - >> >> > >> > > >> >> >> >> www.microsoft.com/windowsxp/expertzone >> >> > >> > > >> >> >> >> >> >> > >> > > >> >> >> >> >> >> > >> > > >> >> >> >> "DaveH" <DaveH@discussions.microsoft.com> wrote >> >> > >> > > >> >> >> >> in >> >> > >> > > >> >> >> >> message >> >> > >> > > >> >> >> >> news:3052BB04-54F9-4A7B-9654-02A0D45DCD62@microsoft.com... >> >> > >> > > >> >> >> >> > I've recently upgraded to SP2 and the Tablet PC >> >> > >> > > >> >> >> >> > Input >> >> > >> > > >> >> >> >> > Panel no >> >> > >> > > >> >> >> >> > longer >> >> > >> > > >> >> >> >> > works. >> >> > >> > > >> >> >> >> > The icon is there on the taskbar but clicking >> >> > >> > > >> >> >> >> > it >> >> > >> > > >> >> >> >> > has no >> >> > >> > > >> >> >> >> > effect. >> >> > >> > > >> >> >> >> > The machine is a Toshiba Portege M200 running >> >> > >> > > >> >> >> >> > SP2 >> >> > >> > > >> >> >> >> > and >> >> > >> > > >> >> >> >> > Office >> >> > >> > > >> >> >> >> > 2003 >> >> > >> > > >> >> >> >> > with >> >> > >> > > >> >> >> >> > all >> >> > >> > > >> >> >> >> > updates applied. >> >> > >> > > >> >> >> >> > Anyone any ideas? >> >> > >> > > >> >> >> >> > From the other posts in this forum I've >> >> > >> > > >> >> >> >> > registered >> >> > >> > > >> >> >> >> > the >> >> > >> > > >> >> >> >> > two >> >> > >> > > >> >> >> >> > DLLs >> >> > >> > > >> >> >> >> > in >> >> > >> > > >> >> >> >> > the >> >> > >> > > >> >> >> >> > Ink >> >> > >> > > >> >> >> >> > directory successfully but these have had no >> >> > >> > > >> >> >> >> > effect. If >> >> > >> > > >> >> >> >> > I need >> >> > >> > > >> >> >> >> > to >> >> > >> > > >> >> >> >> > reinstall >> >> > >> > > >> >> >> >> > drivers, which drivers? >> >> > >> > > >> >> >> >> > All help gratefully received... >> >> > >> > > >> >> >> >> >> >> > >> > > >> >> >> >> >> >> > >> > > >> >> >> >> >> >> > >> > > >> >> >> >> >> > >> > > >> >> >> >> >> > >> > > >> >> >> >> >> > >> > > >> >> >> >> > >> > > >> >> >> >> > >> > > >> >> >> >> > >> > > >> >> >> > >> > > >> >> >> > >> > > >> >> >> > >> > > >> >> > >> > > >> >> > >> > > >> >> > >> >> > >> >> > >> >> >> |
|
| Bookmarks |
| Thread Tools | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| input panel in the way | susan | Windows XP Tablet PC Newsgroup | 0 | 09-18-2007 10:52 PM |
| "Enter, bksp, del ... panel" goes away randomly on the Text Input Panel | Pete B. | Windows XP Tablet PC Newsgroup | 2 | 08-16-2005 08:28 AM |
| Input Panel | Joe | Windows XP Tablet PC Newsgroup | 1 | 04-07-2005 09:16 PM |
| SP 2 Input Panel | Clamchowder | Tablet PC - Averatec | 20 | 10-03-2004 05:31 AM |
| Input Panel will not input text | =?Utf-8?B?ZzAxMA==?= | Windows XP Tablet PC Newsgroup | 4 | 05-26-2004 10:17 PM |
| New To Technology Questions? | Do You Need Help with Your Computer or Device? | Do You Need Help with this site? |
