| |
| |||||||
| Windows XP Tablet PC Newsgroup Join the discussions in the Microsoft Windows XP Tablet PC Newsgroup |
 |
| | LinkBack | Thread Tools |
10-31-2004, 11:16 AM
| |||
| |||
| ntdll.dll tabtip.exe error after installing Sp2 Hi to all, after installing Service Pack 2, when I click into Input Panel it appears a system error that says: AppName: Tabtip.exe AppVer: 1.7.200.2180 ModName: ntdll.dll ModVer: 5.1.2600.2180 Offset: 00010370 I follow some suggestions on the net, in particular to set the proper keyboard language (italian), but nothing has changed and already have this error. I wouldn't uninstall Service Pack 2, some of Tablet Users have solved this problem? Thank you, - Luca -      |
|
10-31-2004, 11:16 AM
| ||
| |
|
10-31-2004, 01:17 PM
| |||
| |||
| Re: ntdll.dll tabtip.exe error after installing Sp2 If your Details button on the Languages tab are correct, Luca, you should have Advanced Text Services which includes Tablet PC Correction, Tablet PC Correction for Windows Journal and Tablet PC Text Insertion. (If you have Office 2003 installed you will also have a fourth entry.) If that is all proper, try going to the Command Prompt (not Start/Run) and enter "regsvr32 inkobj.dll" without the quotation marks, then Enter and then "regsvr32 tpcps.dll" (without quotes) then Enter again. Restart your machine after finishing each of those two modifications to the Registry. -- Chris H. Microsoft Windows MVP/Tablet PC Tablet Creations - http://nicecreations.us/ Associate Expert Expert Zone - www.microsoft.com/windowsxp/expertzone "Luca" <keysteal@libero.it> wrote in message news:ugHtVz1vEHA.2120@TK2MSFTNGP14.phx.gbl... > Hi to all, > > after installing Service Pack 2, when I click into Input Panel it appears > a system error that says: > > AppName: Tabtip.exe AppVer: 1.7.200.2180 ModName: ntdll.dll > ModVer: 5.1.2600.2180 Offset: 00010370 > > I follow some suggestions on the net, in particular to set the proper > keyboard language (italian), but nothing > has changed and already have this error. I wouldn't uninstall Service Pack > 2, some of Tablet Users have solved this > problem? > > Thank you, > > - Luca - > |
|
10-31-2004, 08:16 PM
| |||
| |||
| Re: ntdll.dll tabtip.exe error after installing Sp2 Hi Chris, Nothing to do. I re-registered that two dlls, but nothing has changed. I saw details (in Advaced Text Services), and even if I have installed Office 2003, I see only that three Services you described in your last message and not four. I don't understand what is wrong. "Chris H." <winxpnews********.com> ha scritto nel messaggio news:<Ongvot2vEHA.1300@TK2MSFTNGP14.phx.gbl>... > If your Details button on the Languages tab are correct, Luca, you > should have Advanced Text Services which includes Tablet PC > Correction, Tablet PC Correction for Windows Journal and Tablet PC > Text Insertion. (If you have Office 2003 installed you will also have > a fourth entry.) > > If that is all proper, try going to the Command Prompt (not Start/Run) > and enter "regsvr32 inkobj.dll" without the quotation marks, then > Enter and then > "regsvr32 tpcps.dll" (without quotes) then Enter again. Restart your > machine after finishing each of those two modifications to the Registry. > -- > Chris H. > Microsoft Windows MVP/Tablet PC > Tablet Creations - http://nicecreations.us/ Associate Expert Expert > Zone - www.microsoft.com/windowsxp/expertzone > > "Luca" <keysteal@libero.it> wrote in message > news:ugHtVz1vEHA.2120@TK2MSFTNGP14.phx.gbl... > > Hi to all, > > > > after installing Service Pack 2, when I click into Input Panel it > > appears a system error that says: > > > > AppName: Tabtip.exe AppVer: 1.7.200.2180 ModName: ntdll.dll > > ModVer: 5.1.2600.2180 Offset: 00010370 > > > > I follow some suggestions on the net, in particular to set the > > proper keyboard language (italian), but nothing has changed and > > already have this error. I wouldn't uninstall Service Pack 2, some > > of Tablet Users have solved this problem? > > > > Thank you, > > > > - Luca - > > > > |
|
11-01-2004, 12:15 AM
| |||
| |||
| Re: ntdll.dll tabtip.exe error after installing Sp2 What version of .NET framework do you have installed? If you go to Start/Run and put in "mscorcfg.msc" without the quotes, are you able to access the .NET configuration tools. If you do have .NET installed and this doesn't work, if may be corrupt and need to be updated/reinstalled. If you have an early version installed, the .NET 1.1 Service Pack 1 is available here http://msdn.microsoft.com/netframework/ . Look under the Framework Downloads link. -- Chris H. Microsoft Windows MVP/Tablet PC Tablet Creations - http://nicecreations.us/ Associate Expert Expert Zone - www.microsoft.com/windowsxp/expertzone "Luca" <keysteal@libero.it> wrote in message news:%23y$4dl6vEHA.2804@TK2MSFTNGP14.phx.gbl... > Hi Chris, > > Nothing to do. I re-registered that two dlls, but nothing has changed. I > saw details (in Advaced Text Services), and even if I have installed > Office 2003, I see only that three Services you described in your last > message and not four. I don't understand what is wrong. > > "Chris H." <winxpnews********.com> ha scritto nel messaggio > news:<Ongvot2vEHA.1300@TK2MSFTNGP14.phx.gbl>... > >> If your Details button on the Languages tab are correct, Luca, you > >> should have Advanced Text Services which includes Tablet PC > >> Correction, Tablet PC Correction for Windows Journal and Tablet PC > >> Text Insertion. (If you have Office 2003 installed you will also have > >> a fourth entry.) > >> > >> If that is all proper, try going to the Command Prompt (not Start/Run) > >> and enter "regsvr32 inkobj.dll" without the quotation marks, then > >> Enter and then > >> "regsvr32 tpcps.dll" (without quotes) then Enter again. Restart your > >> machine after finishing each of those two modifications to the Registry. > >> -- > >> Chris H. > >> Microsoft Windows MVP/Tablet PC > >> Tablet Creations - http://nicecreations.us/ Associate Expert Expert > >> Zone - www.microsoft.com/windowsxp/expertzone > >> > >> "Luca" <keysteal@libero.it> wrote in message > >> news:ugHtVz1vEHA.2120@TK2MSFTNGP14.phx.gbl... > >> > Hi to all, > >> > > >> > after installing Service Pack 2, when I click into Input Panel it > >> > appears a system error that says: > >> > > >> > AppName: Tabtip.exe AppVer: 1.7.200.2180 ModName: ntdll.dll > >> > ModVer: 5.1.2600.2180 Offset: 00010370 > >> > > >> > I follow some suggestions on the net, in particular to set the > >> > proper keyboard language (italian), but nothing has changed and > >> > already have this error. I wouldn't uninstall Service Pack 2, some > >> > of Tablet Users have solved this problem? > >> > > >> > Thank you, > >> > > >> > - Luca - > >> > > >> > >> > > |
|
11-01-2004, 12:15 PM
| |||
| |||
| Re: ntdll.dll tabtip.exe error after installing Sp2 Dear Chris, thank for you patience. I tried to start mscorcfg.msc from Start/Run but it didn't start. So I installed .Net 1.1 from Microsoft, and tried again to start .msc from Start/Run, but nothing. I made a search trought my HD and I found it in c:\windows\microsoft ..net\etc. After Start it directly from the .Net folder I find the version 1.1.4322.573. By the way, after installed the Framework the problem hasn't been solved. I de-installed the Service Pack 2 and Tablet Input appears again, after re-installing Service Pack 2 it disappeared. Really, I don't understand where it is the problem. "Chris H." <winxpnews********.com> ha scritto nel messaggio news:urqDIk8vEHA.536@TK2MSFTNGP11.phx.gbl... > What version of .NET framework do you have installed? If you go to > Start/Run and put in "mscorcfg.msc" without the quotes, are you able to > access the .NET configuration tools. If you do have .NET installed and > this doesn't work, if may be corrupt and need to be updated/reinstalled. > > If you have an early version installed, the .NET 1.1 Service Pack 1 is > available here http://msdn.microsoft.com/netframework/ . Look under the > Framework Downloads link. > -- > Chris H. > Microsoft Windows MVP/Tablet PC > Tablet Creations - http://nicecreations.us/ > Associate Expert > Expert Zone - www.microsoft.com/windowsxp/expertzone > > > > "Luca" <keysteal@libero.it> wrote in message > news:%23y$4dl6vEHA.2804@TK2MSFTNGP14.phx.gbl... >> Hi Chris, >> >> Nothing to do. I re-registered that two dlls, but nothing has changed. I >> saw details (in Advaced Text Services), and even if I have installed >> Office 2003, I see only that three Services you described in your last >> message and not four. I don't understand what is wrong. >> >> "Chris H." <winxpnews********.com> ha scritto nel messaggio >> news:<Ongvot2vEHA.1300@TK2MSFTNGP14.phx.gbl>... >> >>> If your Details button on the Languages tab are correct, Luca, you >> >>> should have Advanced Text Services which includes Tablet PC >> >>> Correction, Tablet PC Correction for Windows Journal and Tablet PC >> >>> Text Insertion. (If you have Office 2003 installed you will also have >> >>> a fourth entry.) >> >>> >> >>> If that is all proper, try going to the Command Prompt (not Start/Run) >> >>> and enter "regsvr32 inkobj.dll" without the quotation marks, then >> >>> Enter and then >> >>> "regsvr32 tpcps.dll" (without quotes) then Enter again. Restart your >> >>> machine after finishing each of those two modifications to the Registry. >> >>> -- >> >>> Chris H. >> >>> Microsoft Windows MVP/Tablet PC >> >>> Tablet Creations - http://nicecreations.us/ Associate Expert Expert >> >>> Zone - www.microsoft.com/windowsxp/expertzone >> >>> >> >>> "Luca" <keysteal@libero.it> wrote in message >> >>> news:ugHtVz1vEHA.2120@TK2MSFTNGP14.phx.gbl... >> >>> > Hi to all, >> >>> > >> >>> > after installing Service Pack 2, when I click into Input Panel it >> >>> > appears a system error that says: >> >>> > >> >>> > AppName: Tabtip.exe AppVer: 1.7.200.2180 ModName: ntdll.dll >> >>> > ModVer: 5.1.2600.2180 Offset: 00010370 >> >>> > >> >>> > I follow some suggestions on the net, in particular to set the >> >>> > proper keyboard language (italian), but nothing has changed and >> >>> > already have this error. I wouldn't uninstall Service Pack 2, some >> >>> > of Tablet Users have solved this problem? >> >>> > >> >>> > Thank you, >> >>> > >> >>> > - Luca - >> >>> > >> >>> >> >>> >> >> > > |
|
11-01-2004, 01:16 PM
| |||
| |||
| Re: ntdll.dll tabtip.exe error after installing Sp2 We should go step-by-step on this. Are you getting any error messages when you attempt to start mscorcfg.msc from Start/Run, or is it just not responding? If you go to Start/Run and put in "msc" without the quotes, then tap the OK button, does that launch the Microsoft Management Console without error? If you go into Control Panel/Administrative Tools do you see the Microsoft ..NET Framework 1.1 Configuration shortcut in there? Does it launch properly from that location? When you say the Tablet Input Panel "disappeared" could you describe exactly what you're seeing? Are you saying there is no icon in the Taskbar area from which to launch the TIP? Are you saying it doesn't launch when you tap that icon? -- Chris H. Microsoft Windows MVP/Tablet PC Tablet Creations - http://nicecreations.us/ Associate Expert Expert Zone - www.microsoft.com/windowsxp/expertzone "Luca" <keysteal@libero.it> wrote in message news:O$KzHxCwEHA.3292@TK2MSFTNGP15.phx.gbl... > Dear Chris, > > thank for you patience. I tried to start mscorcfg.msc from Start/Run but > it didn't start. > So I installed .Net 1.1 from Microsoft, and tried again to start .msc from > Start/Run, but nothing. > I made a search trought my HD and I found it in c:\windows\microsoft > .net\etc. After Start it directly from the .Net > folder I find the version 1.1.4322.573. > > By the way, after installed the Framework the problem hasn't been solved. > I de-installed the Service Pack 2 and Tablet > Input appears again, after re-installing Service Pack 2 it disappeared. > > Really, I don't understand where it is the problem. > > "Chris H." <winxpnews********.com> ha scritto nel messaggio > news:urqDIk8vEHA.536@TK2MSFTNGP11.phx.gbl... >> What version of .NET framework do you have installed? If you go to >> Start/Run and put in "mscorcfg.msc" without the quotes, are you able to >> access the .NET configuration tools. If you do have .NET installed and >> this doesn't work, if may be corrupt and need to be updated/reinstalled. >> >> If you have an early version installed, the .NET 1.1 Service Pack 1 is >> available here http://msdn.microsoft.com/netframework/ . Look under the >> Framework Downloads link. >> -- >> Chris H. >> Microsoft Windows MVP/Tablet PC >> Tablet Creations - http://nicecreations.us/ >> Associate Expert >> Expert Zone - www.microsoft.com/windowsxp/expertzone >> >> >> >> "Luca" <keysteal@libero.it> wrote in message >> news:%23y$4dl6vEHA.2804@TK2MSFTNGP14.phx.gbl... >>> Hi Chris, >>> >>> Nothing to do. I re-registered that two dlls, but nothing has changed. I >>> saw details (in Advaced Text Services), and even if I have installed >>> Office 2003, I see only that three Services you described in your last >>> message and not four. I don't understand what is wrong. >>> >>> "Chris H." <winxpnews********.com> ha scritto nel messaggio >>> news:<Ongvot2vEHA.1300@TK2MSFTNGP14.phx.gbl>... >>> >>>> If your Details button on the Languages tab are correct, Luca, you >>> >>>> should have Advanced Text Services which includes Tablet PC >>> >>>> Correction, Tablet PC Correction for Windows Journal and Tablet PC >>> >>>> Text Insertion. (If you have Office 2003 installed you will also have >>> >>>> a fourth entry.) >>> >>>> >>> >>>> If that is all proper, try going to the Command Prompt (not Start/Run) >>> >>>> and enter "regsvr32 inkobj.dll" without the quotation marks, then >>> >>>> Enter and then >>> >>>> "regsvr32 tpcps.dll" (without quotes) then Enter again. Restart your >>> >>>> machine after finishing each of those two modifications to the >>>> Registry. >>> >>>> -- >>> >>>> Chris H. >>> >>>> Microsoft Windows MVP/Tablet PC >>> >>>> Tablet Creations - http://nicecreations.us/ Associate Expert Expert >>> >>>> Zone - www.microsoft.com/windowsxp/expertzone >>> >>>> >>> >>>> "Luca" <keysteal@libero.it> wrote in message >>> >>>> news:ugHtVz1vEHA.2120@TK2MSFTNGP14.phx.gbl... >>> >>>> > Hi to all, >>> >>>> > >>> >>>> > after installing Service Pack 2, when I click into Input Panel it >>> >>>> > appears a system error that says: >>> >>>> > >>> >>>> > AppName: Tabtip.exe AppVer: 1.7.200.2180 ModName: ntdll.dll >>> >>>> > ModVer: 5.1.2600.2180 Offset: 00010370 >>> >>>> > >>> >>>> > I follow some suggestions on the net, in particular to set the >>> >>>> > proper keyboard language (italian), but nothing has changed and >>> >>>> > already have this error. I wouldn't uninstall Service Pack 2, some >>> >>>> > of Tablet Users have solved this problem? >>> >>>> > >>> >>>> > Thank you, >>> >>>> > >>> >>>> > - Luca - >>> >>>> > >>> >>>> >>> >>>> >>> >>> >> >> > > |
|
11-01-2004, 05:19 PM
| |||
| |||
| Re: ntdll.dll tabtip.exe error after installing Sp2 Hi Chris, When I try to run mscorcfg.msc from Start/Run it simply says that it doesn't find any program with that name. So I must search it throught Hd and run it directly from its directory. I launch the Framework correctly from Administrative Tools. I make a mistake, I mean with appearing that the panel is displaying as a keyboard meanwhile now it's only a window without the keyboard. Empty. "Chris H." <winxpnews********.com> ha scritto nel messaggio news:uK2mpVDwEHA.824@TK2MSFTNGP11.phx.gbl... > We should go step-by-step on this. Are you getting any error messages > when you attempt to start mscorcfg.msc from Start/Run, or is it just not > responding? If you go to Start/Run and put in "msc" without the quotes, > then tap the OK button, does that launch the Microsoft Management Console > without error? > > If you go into Control Panel/Administrative Tools do you see the Microsoft > .NET Framework 1.1 Configuration shortcut in there? Does it launch > properly from that location? > > When you say the Tablet Input Panel "disappeared" could you describe > exactly what you're seeing? Are you saying there is no icon in the > Taskbar area from which to launch the TIP? Are you saying it doesn't > launch when you tap that icon? > -- > Chris H. > Microsoft Windows MVP/Tablet PC > Tablet Creations - http://nicecreations.us/ > Associate Expert > Expert Zone - www.microsoft.com/windowsxp/expertzone > > > "Luca" <keysteal@libero.it> wrote in message > news:O$KzHxCwEHA.3292@TK2MSFTNGP15.phx.gbl... >> Dear Chris, >> >> thank for you patience. I tried to start mscorcfg.msc from Start/Run but >> it didn't start. >> So I installed .Net 1.1 from Microsoft, and tried again to start .msc >> from Start/Run, but nothing. >> I made a search trought my HD and I found it in c:\windows\microsoft >> .net\etc. After Start it directly from the .Net >> folder I find the version 1.1.4322.573. >> >> By the way, after installed the Framework the problem hasn't been solved. >> I de-installed the Service Pack 2 and Tablet >> Input appears again, after re-installing Service Pack 2 it disappeared. >> >> Really, I don't understand where it is the problem. >> >> "Chris H." <winxpnews********.com> ha scritto nel messaggio >> news:urqDIk8vEHA.536@TK2MSFTNGP11.phx.gbl... >>> What version of .NET framework do you have installed? If you go to >>> Start/Run and put in "mscorcfg.msc" without the quotes, are you able to >>> access the .NET configuration tools. If you do have .NET installed and >>> this doesn't work, if may be corrupt and need to be updated/reinstalled. >>> >>> If you have an early version installed, the .NET 1.1 Service Pack 1 is >>> available here http://msdn.microsoft.com/netframework/ . Look under the >>> Framework Downloads link. >>> -- >>> Chris H. >>> Microsoft Windows MVP/Tablet PC >>> Tablet Creations - http://nicecreations.us/ >>> Associate Expert >>> Expert Zone - www.microsoft.com/windowsxp/expertzone >>> >>> >>> >>> "Luca" <keysteal@libero.it> wrote in message >>> news:%23y$4dl6vEHA.2804@TK2MSFTNGP14.phx.gbl... >>>> Hi Chris, >>>> >>>> Nothing to do. I re-registered that two dlls, but nothing has changed. >>>> I saw details (in Advaced Text Services), and even if I have installed >>>> Office 2003, I see only that three Services you described in your last >>>> message and not four. I don't understand what is wrong. >>>> >>>> "Chris H." <winxpnews********.com> ha scritto nel messaggio >>>> news:<Ongvot2vEHA.1300@TK2MSFTNGP14.phx.gbl>... >>>> >>>>> If your Details button on the Languages tab are correct, Luca, you >>>> >>>>> should have Advanced Text Services which includes Tablet PC >>>> >>>>> Correction, Tablet PC Correction for Windows Journal and Tablet PC >>>> >>>>> Text Insertion. (If you have Office 2003 installed you will also have >>>> >>>>> a fourth entry.) >>>> >>>>> >>>> >>>>> If that is all proper, try going to the Command Prompt (not Start/Run) >>>> >>>>> and enter "regsvr32 inkobj.dll" without the quotation marks, then >>>> >>>>> Enter and then >>>> >>>>> "regsvr32 tpcps.dll" (without quotes) then Enter again. Restart your >>>> >>>>> machine after finishing each of those two modifications to the >>>>> Registry. >>>> >>>>> -- >>>> >>>>> Chris H. >>>> >>>>> Microsoft Windows MVP/Tablet PC >>>> >>>>> Tablet Creations - http://nicecreations.us/ Associate Expert Expert >>>> >>>>> Zone - www.microsoft.com/windowsxp/expertzone >>>> >>>>> >>>> >>>>> "Luca" <keysteal@libero.it> wrote in message >>>> >>>>> news:ugHtVz1vEHA.2120@TK2MSFTNGP14.phx.gbl... >>>> >>>>> > Hi to all, >>>> >>>>> > >>>> >>>>> > after installing Service Pack 2, when I click into Input Panel it >>>> >>>>> > appears a system error that says: >>>> >>>>> > >>>> >>>>> > AppName: Tabtip.exe AppVer: 1.7.200.2180 ModName: ntdll.dll >>>> >>>>> > ModVer: 5.1.2600.2180 Offset: 00010370 >>>> >>>>> > >>>> >>>>> > I follow some suggestions on the net, in particular to set the >>>> >>>>> > proper keyboard language (italian), but nothing has changed and >>>> >>>>> > already have this error. I wouldn't uninstall Service Pack 2, some >>>> >>>>> > of Tablet Users have solved this problem? >>>> >>>>> > >>>> >>>>> > Thank you, >>>> >>>>> > >>>> >>>>> > - Luca - >>>> >>>>> > >>>> >>>>> >>>> >>>>> >>>> >>>> >>> >>> >> >> > > |
|
11-01-2004, 07:15 PM
| |||
| |||
| Re: ntdll.dll tabtip.exe error after installing Sp2 Luca, perhaps we should try this: Go to the Command Prompt (you can get there by doing "cmd" without the quotes from Start/Run), then would you enter "regsvr32 inkobj.dll" without the quotation marks, then Enter and then "regsvr32 tpcps.dll" (without quotes) then Enter again. Restart your machine after finishing each of those two modifications to the Registry. If this doesn't correct the situation, then I would suggest booting into Safe Mode (F8 or the appropriate Tablet button on boot-up) so no drivers are loaded, and no programs are running, then do a reinstall of Windows XP SP2 and the Tablet PC Edition 2005 over the top of what you have. This will not uninstall or wipe out any of your programs, but make sure you've backed up your personal files just in case. -- Chris H. Microsoft Windows MVP/Tablet PC Tablet Creations - http://nicecreations.us/ Associate Expert Expert Zone - www.microsoft.com/windowsxp/expertzone "Luca" <keysteal@libero.it> wrote in message news:%23UAjcZFwEHA.3416@TK2MSFTNGP09.phx.gbl... > Hi Chris, > > When I try to run mscorcfg.msc from Start/Run it simply says that it > doesn't > find any program with that name. So I must search it throught Hd and run > it directly from > its directory. > > I launch the Framework correctly from Administrative Tools. > > I make a mistake, I mean with appearing that the panel is displaying as a > keyboard meanwhile now it's > only a window without the keyboard. Empty. > > "Chris H." <winxpnews********.com> ha scritto nel messaggio > news:uK2mpVDwEHA.824@TK2MSFTNGP11.phx.gbl... >> We should go step-by-step on this. Are you getting any error messages >> when you attempt to start mscorcfg.msc from Start/Run, or is it just not >> responding? If you go to Start/Run and put in "msc" without the quotes, >> then tap the OK button, does that launch the Microsoft Management Console >> without error? >> >> If you go into Control Panel/Administrative Tools do you see the >> Microsoft .NET Framework 1.1 Configuration shortcut in there? Does it >> launch properly from that location? >> >> When you say the Tablet Input Panel "disappeared" could you describe >> exactly what you're seeing? Are you saying there is no icon in the >> Taskbar area from which to launch the TIP? Are you saying it doesn't >> launch when you tap that icon? >> -- >> Chris H. >> Microsoft Windows MVP/Tablet PC >> Tablet Creations - http://nicecreations.us/ >> Associate Expert >> Expert Zone - www.microsoft.com/windowsxp/expertzone >> >> >> "Luca" <keysteal@libero.it> wrote in message >> news:O$KzHxCwEHA.3292@TK2MSFTNGP15.phx.gbl... >>> Dear Chris, >>> >>> thank for you patience. I tried to start mscorcfg.msc from Start/Run but >>> it didn't start. >>> So I installed .Net 1.1 from Microsoft, and tried again to start .msc >>> from Start/Run, but nothing. >>> I made a search trought my HD and I found it in c:\windows\microsoft >>> .net\etc. After Start it directly from the .Net >>> folder I find the version 1.1.4322.573. >>> >>> By the way, after installed the Framework the problem hasn't been >>> solved. I de-installed the Service Pack 2 and Tablet >>> Input appears again, after re-installing Service Pack 2 it disappeared. >>> >>> Really, I don't understand where it is the problem. >>> >>> "Chris H." <winxpnews********.com> ha scritto nel messaggio >>> news:urqDIk8vEHA.536@TK2MSFTNGP11.phx.gbl... >>>> What version of .NET framework do you have installed? If you go to >>>> Start/Run and put in "mscorcfg.msc" without the quotes, are you able to >>>> access the .NET configuration tools. If you do have .NET installed and >>>> this doesn't work, if may be corrupt and need to be >>>> updated/reinstalled. >>>> >>>> If you have an early version installed, the .NET 1.1 Service Pack 1 is >>>> available here http://msdn.microsoft.com/netframework/ . Look under >>>> the Framework Downloads link. >>>> -- >>>> Chris H. >>>> Microsoft Windows MVP/Tablet PC >>>> Tablet Creations - http://nicecreations.us/ >>>> Associate Expert >>>> Expert Zone - www.microsoft.com/windowsxp/expertzone >>>> >>>> >>>> >>>> "Luca" <keysteal@libero.it> wrote in message >>>> news:%23y$4dl6vEHA.2804@TK2MSFTNGP14.phx.gbl... >>>>> Hi Chris, >>>>> >>>>> Nothing to do. I re-registered that two dlls, but nothing has changed. >>>>> I saw details (in Advaced Text Services), and even if I have installed >>>>> Office 2003, I see only that three Services you described in your last >>>>> message and not four. I don't understand what is wrong. >>>>> >>>>> "Chris H." <winxpnews********.com> ha scritto nel messaggio >>>>> news:<Ongvot2vEHA.1300@TK2MSFTNGP14.phx.gbl>... >>>>> >>>>>> If your Details button on the Languages tab are correct, Luca, you >>>>> >>>>>> should have Advanced Text Services which includes Tablet PC >>>>> >>>>>> Correction, Tablet PC Correction for Windows Journal and Tablet PC >>>>> >>>>>> Text Insertion. (If you have Office 2003 installed you will also have >>>>> >>>>>> a fourth entry.) >>>>> >>>>>> >>>>> >>>>>> If that is all proper, try going to the Command Prompt (not >>>>>> Start/Run) >>>>> >>>>>> and enter "regsvr32 inkobj.dll" without the quotation marks, then >>>>> >>>>>> Enter and then >>>>> >>>>>> "regsvr32 tpcps.dll" (without quotes) then Enter again. Restart your >>>>> >>>>>> machine after finishing each of those two modifications to the >>>>>> Registry. >>>>> >>>>>> -- >>>>> >>>>>> Chris H. >>>>> >>>>>> Microsoft Windows MVP/Tablet PC >>>>> >>>>>> Tablet Creations - http://nicecreations.us/ Associate Expert Expert >>>>> >>>>>> Zone - www.microsoft.com/windowsxp/expertzone >>>>> >>>>>> >>>>> >>>>>> "Luca" <keysteal@libero.it> wrote in message >>>>> >>>>>> news:ugHtVz1vEHA.2120@TK2MSFTNGP14.phx.gbl... >>>>> >>>>>> > Hi to all, >>>>> >>>>>> > >>>>> >>>>>> > after installing Service Pack 2, when I click into Input Panel it >>>>> >>>>>> > appears a system error that says: >>>>> >>>>>> > >>>>> >>>>>> > AppName: Tabtip.exe AppVer: 1.7.200.2180 ModName: ntdll.dll >>>>> >>>>>> > ModVer: 5.1.2600.2180 Offset: 00010370 >>>>> >>>>>> > >>>>> >>>>>> > I follow some suggestions on the net, in particular to set the >>>>> >>>>>> > proper keyboard language (italian), but nothing has changed and >>>>> >>>>>> > already have this error. I wouldn't uninstall Service Pack 2, some >>>>> >>>>>> > of Tablet Users have solved this problem? >>>>> >>>>>> > >>>>> >>>>>> > Thank you, >>>>> >>>>>> > >>>>> >>>>>> > - Luca - >>>>> >>>>>> > >>>>> >>>>>> >>>>> >>>>>> >>>>> >>>>> >>>> >>>> >>> >>> >> >> > > |
|
11-02-2004, 05:16 AM
| |||
| |||
| Re: ntdll.dll tabtip.exe error after installing Sp2 Don't be angry Chris, but it doesn't work. I don't realize what Service Pack 2 Install to not permit the correct functioning of Tablet Input. Let me know, - Luca - "Chris H." <winxpnews********.com> ha scritto nel messaggio news:u%23Z0sMGwEHA.2908@tk2msftngp13.phx.gbl... > Luca, perhaps we should try this: Go to the Command Prompt (you can get > there by doing "cmd" without the quotes from Start/Run), then would you > enter "regsvr32 inkobj.dll" without the quotation marks, then Enter and > then "regsvr32 tpcps.dll" (without quotes) then Enter again. Restart your > machine after finishing each of those two modifications to the Registry. > > If this doesn't correct the situation, then I would suggest booting into > Safe Mode (F8 or the appropriate Tablet button on boot-up) so no drivers > are loaded, and no programs are running, then do a reinstall of Windows XP > SP2 and the Tablet PC Edition 2005 over the top of what you have. > > This will not uninstall or wipe out any of your programs, but make sure > you've backed up your personal files just in case. > -- > Chris H. > Microsoft Windows MVP/Tablet PC > Tablet Creations - http://nicecreations.us/ > Associate Expert > Expert Zone - www.microsoft.com/windowsxp/expertzone > > > > "Luca" <keysteal@libero.it> wrote in message > news:%23UAjcZFwEHA.3416@TK2MSFTNGP09.phx.gbl... >> Hi Chris, >> >> When I try to run mscorcfg.msc from Start/Run it simply says that it >> doesn't >> find any program with that name. So I must search it throught Hd and run >> it directly from >> its directory. >> >> I launch the Framework correctly from Administrative Tools. >> >> I make a mistake, I mean with appearing that the panel is displaying as a >> keyboard meanwhile now it's >> only a window without the keyboard. Empty. >> >> "Chris H." <winxpnews********.com> ha scritto nel messaggio >> news:uK2mpVDwEHA.824@TK2MSFTNGP11.phx.gbl... >>> We should go step-by-step on this. Are you getting any error messages >>> when you attempt to start mscorcfg.msc from Start/Run, or is it just not >>> responding? If you go to Start/Run and put in "msc" without the quotes, >>> then tap the OK button, does that launch the Microsoft Management >>> Console without error? >>> >>> If you go into Control Panel/Administrative Tools do you see the >>> Microsoft .NET Framework 1.1 Configuration shortcut in there? Does it >>> launch properly from that location? >>> >>> When you say the Tablet Input Panel "disappeared" could you describe >>> exactly what you're seeing? Are you saying there is no icon in the >>> Taskbar area from which to launch the TIP? Are you saying it doesn't >>> launch when you tap that icon? >>> -- >>> Chris H. >>> Microsoft Windows MVP/Tablet PC >>> Tablet Creations - http://nicecreations.us/ >>> Associate Expert >>> Expert Zone - www.microsoft.com/windowsxp/expertzone >>> >>> >>> "Luca" <keysteal@libero.it> wrote in message >>> news:O$KzHxCwEHA.3292@TK2MSFTNGP15.phx.gbl... >>>> Dear Chris, >>>> >>>> thank for you patience. I tried to start mscorcfg.msc from Start/Run >>>> but it didn't start. >>>> So I installed .Net 1.1 from Microsoft, and tried again to start .msc >>>> from Start/Run, but nothing. >>>> I made a search trought my HD and I found it in c:\windows\microsoft >>>> .net\etc. After Start it directly from the .Net >>>> folder I find the version 1.1.4322.573. >>>> >>>> By the way, after installed the Framework the problem hasn't been >>>> solved. I de-installed the Service Pack 2 and Tablet >>>> Input appears again, after re-installing Service Pack 2 it disappeared. >>>> >>>> Really, I don't understand where it is the problem. >>>> >>>> "Chris H." <winxpnews********.com> ha scritto nel messaggio >>>> news:urqDIk8vEHA.536@TK2MSFTNGP11.phx.gbl... >>>>> What version of .NET framework do you have installed? If you go to >>>>> Start/Run and put in "mscorcfg.msc" without the quotes, are you able >>>>> to access the .NET configuration tools. If you do have .NET installed >>>>> and this doesn't work, if may be corrupt and need to be >>>>> updated/reinstalled. >>>>> >>>>> If you have an early version installed, the .NET 1.1 Service Pack 1 is >>>>> available here http://msdn.microsoft.com/netframework/ . Look under >>>>> the Framework Downloads link. >>>>> -- >>>>> Chris H. >>>>> Microsoft Windows MVP/Tablet PC >>>>> Tablet Creations - http://nicecreations.us/ >>>>> Associate Expert >>>>> Expert Zone - www.microsoft.com/windowsxp/expertzone >>>>> >>>>> >>>>> >>>>> "Luca" <keysteal@libero.it> wrote in message >>>>> news:%23y$4dl6vEHA.2804@TK2MSFTNGP14.phx.gbl... >>>>>> Hi Chris, >>>>>> >>>>>> Nothing to do. I re-registered that two dlls, but nothing has >>>>>> changed. I saw details (in Advaced Text Services), and even if I have >>>>>> installed Office 2003, I see only that three Services you described >>>>>> in your last message and not four. I don't understand what is wrong. >>>>>> >>>>>> "Chris H." <winxpnews********.com> ha scritto nel messaggio >>>>>> news:<Ongvot2vEHA.1300@TK2MSFTNGP14.phx.gbl>... >>>>>> >>>>>>> If your Details button on the Languages tab are correct, Luca, you >>>>>> >>>>>>> should have Advanced Text Services which includes Tablet PC >>>>>> >>>>>>> Correction, Tablet PC Correction for Windows Journal and Tablet PC >>>>>> >>>>>>> Text Insertion. (If you have Office 2003 installed you will also >>>>>>> have >>>>>> >>>>>>> a fourth entry.) >>>>>> >>>>>>> >>>>>> >>>>>>> If that is all proper, try going to the Command Prompt (not >>>>>>> Start/Run) >>>>>> >>>>>>> and enter "regsvr32 inkobj.dll" without the quotation marks, then >>>>>> >>>>>>> Enter and then >>>>>> >>>>>>> "regsvr32 tpcps.dll" (without quotes) then Enter again. Restart your >>>>>> >>>>>>> machine after finishing each of those two modifications to the >>>>>>> Registry. >>>>>> >>>>>>> -- >>>>>> >>>>>>> Chris H. >>>>>> >>>>>>> Microsoft Windows MVP/Tablet PC >>>>>> >>>>>>> Tablet Creations - http://nicecreations.us/ Associate Expert Expert >>>>>> >>>>>>> Zone - www.microsoft.com/windowsxp/expertzone >>>>>> >>>>>>> >>>>>> >>>>>>> "Luca" <keysteal@libero.it> wrote in message >>>>>> >>>>>>> news:ugHtVz1vEHA.2120@TK2MSFTNGP14.phx.gbl... >>>>>> >>>>>>> > Hi to all, >>>>>> >>>>>>> > >>>>>> >>>>>>> > after installing Service Pack 2, when I click into Input Panel it >>>>>> >>>>>>> > appears a system error that says: >>>>>> >>>>>>> > >>>>>> >>>>>>> > AppName: Tabtip.exe AppVer: 1.7.200.2180 ModName: ntdll.dll >>>>>> >>>>>>> > ModVer: 5.1.2600.2180 Offset: 00010370 >>>>>> >>>>>>> > >>>>>> >>>>>>> > I follow some suggestions on the net, in particular to set the >>>>>> >>>>>>> > proper keyboard language (italian), but nothing has changed and >>>>>> >>>>>>> > already have this error. I wouldn't uninstall Service Pack 2, some >>>>>> >>>>>>> > of Tablet Users have solved this problem? >>>>>> >>>>>>> > >>>>>> >>>>>>> > Thank you, >>>>>> >>>>>>> > >>>>>> >>>>>>> > - Luca - >>>>>> >>>>>>> > >>>>>> >>>>>>> >>>>>> >>>>>>> >>>>>> >>>>>> >>>>> >>>>> >>>> >>>> >>> >>> >> >> > > |
|
11-02-2004, 11:15 AM
| |||
| |||
| Re: ntdll.dll tabtip.exe error after installing Sp2 Luca, I'm only bothered that it isn't working correctly, and trying to help you figure out what's wrong. Not to worry. When you say it "doesn't work" could you give me the exact details of what happened? Did it fail with an error message? Did it not find the files I said to run the Registry fixes on? If I don't have details - (1) I followed your instructions and (2) this is what happened - I have no way of knowing which way to try what next. 8-) -- Chris H. Microsoft Windows MVP/Tablet PC Tablet Creations - http://nicecreations.us/ Associate Expert Expert Zone - www.microsoft.com/windowsxp/expertzone "Luca" <keysteal@libero.it> wrote in message news:uHz6mkLwEHA.1564@TK2MSFTNGP09.phx.gbl... > Don't be angry Chris, but it doesn't work. > I don't realize what Service Pack 2 Install to not permit the correct > functioning of Tablet Input. > > Let me know, > > - Luca - > > "Chris H." <winxpnews********.com> ha scritto nel messaggio > news:u%23Z0sMGwEHA.2908@tk2msftngp13.phx.gbl... >> Luca, perhaps we should try this: Go to the Command Prompt (you can get >> there by doing "cmd" without the quotes from Start/Run), then would you >> enter "regsvr32 inkobj.dll" without the quotation marks, then Enter and >> then "regsvr32 tpcps.dll" (without quotes) then Enter again. Restart >> your machine after finishing each of those two modifications to the >> Registry. >> >> If this doesn't correct the situation, then I would suggest booting into >> Safe Mode (F8 or the appropriate Tablet button on boot-up) so no drivers >> are loaded, and no programs are running, then do a reinstall of Windows >> XP SP2 and the Tablet PC Edition 2005 over the top of what you have. >> >> This will not uninstall or wipe out any of your programs, but make sure >> you've backed up your personal files just in case. >> -- >> Chris H. >> Microsoft Windows MVP/Tablet PC >> Tablet Creations - http://nicecreations.us/ >> Associate Expert >> Expert Zone - www.microsoft.com/windowsxp/expertzone >> >> >> >> "Luca" <keysteal@libero.it> wrote in message >> news:%23UAjcZFwEHA.3416@TK2MSFTNGP09.phx.gbl... >>> Hi Chris, >>> >>> When I try to run mscorcfg.msc from Start/Run it simply says that it >>> doesn't >>> find any program with that name. So I must search it throught Hd and run >>> it directly from >>> its directory. >>> >>> I launch the Framework correctly from Administrative Tools. >>> >>> I make a mistake, I mean with appearing that the panel is displaying as >>> a keyboard meanwhile now it's >>> only a window without the keyboard. Empty. >>> >>> "Chris H." <winxpnews********.com> ha scritto nel messaggio >>> news:uK2mpVDwEHA.824@TK2MSFTNGP11.phx.gbl... >>>> We should go step-by-step on this. Are you getting any error messages >>>> when you attempt to start mscorcfg.msc from Start/Run, or is it just >>>> not responding? If you go to Start/Run and put in "msc" without the >>>> quotes, then tap the OK button, does that launch the Microsoft >>>> Management Console without error? >>>> >>>> If you go into Control Panel/Administrative Tools do you see the >>>> Microsoft .NET Framework 1.1 Configuration shortcut in there? Does it >>>> launch properly from that location? >>>> >>>> When you say the Tablet Input Panel "disappeared" could you describe >>>> exactly what you're seeing? Are you saying there is no icon in the >>>> Taskbar area from which to launch the TIP? Are you saying it doesn't >>>> launch when you tap that icon? >>>> -- >>>> Chris H. >>>> Microsoft Windows MVP/Tablet PC >>>> Tablet Creations - http://nicecreations.us/ >>>> Associate Expert >>>> Expert Zone - www.microsoft.com/windowsxp/expertzone >>>> >>>> >>>> "Luca" <keysteal@libero.it> wrote in message >>>> news:O$KzHxCwEHA.3292@TK2MSFTNGP15.phx.gbl... >>>>> Dear Chris, >>>>> >>>>> thank for you patience. I tried to start mscorcfg.msc from Start/Run >>>>> but it didn't start. >>>>> So I installed .Net 1.1 from Microsoft, and tried again to start .msc >>>>> from Start/Run, but nothing. >>>>> I made a search trought my HD and I found it in c:\windows\microsoft >>>>> .net\etc. After Start it directly from the .Net >>>>> folder I find the version 1.1.4322.573. >>>>> >>>>> By the way, after installed the Framework the problem hasn't been >>>>> solved. I de-installed the Service Pack 2 and Tablet >>>>> Input appears again, after re-installing Service Pack 2 it >>>>> disappeared. >>>>> >>>>> Really, I don't understand where it is the problem. >>>>> >>>>> "Chris H." <winxpnews********.com> ha scritto nel messaggio >>>>> news:urqDIk8vEHA.536@TK2MSFTNGP11.phx.gbl... >>>>>> What version of .NET framework do you have installed? If you go to >>>>>> Start/Run and put in "mscorcfg.msc" without the quotes, are you able >>>>>> to access the .NET configuration tools. If you do have .NET >>>>>> installed and this doesn't work, if may be corrupt and need to be >>>>>> updated/reinstalled. >>>>>> >>>>>> If you have an early version installed, the .NET 1.1 Service Pack 1 >>>>>> is available here http://msdn.microsoft.com/netframework/ . Look >>>>>> under the Framework Downloads link. >>>>>> -- >>>>>> Chris H. >>>>>> Microsoft Windows MVP/Tablet PC >>>>>> Tablet Creations - http://nicecreations.us/ >>>>>> Associate Expert >>>>>> Expert Zone - www.microsoft.com/windowsxp/expertzone >>>>>> >>>>>> >>>>>> >>>>>> "Luca" <keysteal@libero.it> wrote in message >>>>>> news:%23y$4dl6vEHA.2804@TK2MSFTNGP14.phx.gbl... >>>>>>> Hi Chris, >>>>>>> >>>>>>> Nothing to do. I re-registered that two dlls, but nothing has >>>>>>> changed. I saw details (in Advaced Text Services), and even if I >>>>>>> have installed Office 2003, I see only that three Services you >>>>>>> described in your last message and not four. I don't understand what >>>>>>> is wrong. >>>>>>> >>>>>>> "Chris H." <winxpnews********.com> ha scritto nel messaggio >>>>>>> news:<Ongvot2vEHA.1300@TK2MSFTNGP14.phx.gbl>... >>>>>>> >>>>>>>> If your Details button on the Languages tab are correct, Luca, you >>>>>>> >>>>>>>> should have Advanced Text Services which includes Tablet PC >>>>>>> >>>>>>>> Correction, Tablet PC Correction for Windows Journal and Tablet PC >>>>>>> >>>>>>>> Text Insertion. (If you have Office 2003 installed you will also >>>>>>>> have >>>>>>> >>>>>>>> a fourth entry.) >>>>>>> >>>>>>>> >>>>>>> >>>>>>>> If that is all proper, try going to the Command Prompt (not >>>>>>>> Start/Run) >>>>>>> >>>>>>>> and enter "regsvr32 inkobj.dll" without the quotation marks, then >>>>>>> >>>>>>>> Enter and then >>>>>>> >>>>>>>> "regsvr32 tpcps.dll" (without quotes) then Enter again. Restart >>>>>>>> your >>>>>>> >>>>>>>> machine after finishing each of those two modifications to the >>>>>>>> Registry. >>>>>>> >>>>>>>> -- >>>>>>> >>>>>>>> Chris H. >>>>>>> >>>>>>>> Microsoft Windows MVP/Tablet PC >>>>>>> >>>>>>>> Tablet Creations - http://nicecreations.us/ Associate Expert Expert >>>>>>> >>>>>>>> Zone - www.microsoft.com/windowsxp/expertzone >>>>>>> >>>>>>>> >>>>>>> >>>>>>>> "Luca" <keysteal@libero.it> wrote in message >>>>>>> >>>>>>>> news:ugHtVz1vEHA.2120@TK2MSFTNGP14.phx.gbl... >>>>>>> >>>>>>>> > Hi to all, >>>>>>> >>>>>>>> > >>>>>>> >>>>>>>> > after installing Service Pack 2, when I click into Input Panel it >>>>>>> >>>>>>>> > appears a system error that says: >>>>>>> >>>>>>>> > >>>>>>> >>>>>>>> > AppName: Tabtip.exe AppVer: 1.7.200.2180 ModName: ntdll.dll >>>>>>> >>>>>>>> > ModVer: 5.1.2600.2180 Offset: 00010370 >>>>>>> >>>>>>>> > >>>>>>> >>>>>>>> > I follow some suggestions on the net, in particular to set the >>>>>>> >>>>>>>> > proper keyboard language (italian), but nothing has changed and >>>>>>> >>>>>>>> > already have this error. I wouldn't uninstall Service Pack 2, >>>>>>>> > some >>>>>>> >>>>>>>> > of Tablet Users have solved this problem? >>>>>>> >>>>>>>> > >>>>>>> >>>>>>>> > Thank you, >>>>>>> >>>>>>>> > >>>>>>> >>>>>>>> > - Luca - >>>>>>> >>>>>>>> > >>>>>>> >>>>>>>> >>>>>>> >>>>>>>> >>>>>>> >>>>>>> >>>>>> >>>>>> >>>>> >>>>> >>>> >>>> >>> >>> >> >> > > |
|
11-02-2004, 04:18 PM
| |||
| |||
| Re: ntdll.dll tabtip.exe error after installing Sp2 Hi Chris (again), it means that it's as before, so the table input is empty when Windows Xp starts, and when I login to the system and when I try to run the table input from the icon it returns with a system error (ntdll.dll and tabtip.exe). So, nothing has changed. "Chris H." <winxpnews********.com> ha scritto nel messaggio news:uaz4koOwEHA.2540@TK2MSFTNGP09.phx.gbl... > Luca, I'm only bothered that it isn't working correctly, and trying to > help you figure out what's wrong. Not to worry. > > When you say it "doesn't work" could you give me the exact details of what > happened? Did it fail with an error message? Did it not find the files I > said to run the Registry fixes on? > > If I don't have details - (1) I followed your instructions and (2) this is > what happened - I have no way of knowing which way to try what next. 8-) > -- > Chris H. > Microsoft Windows MVP/Tablet PC > Tablet Creations - http://nicecreations.us/ > Associate Expert > Expert Zone - www.microsoft.com/windowsxp/expertzone > > > "Luca" <keysteal@libero.it> wrote in message > news:uHz6mkLwEHA.1564@TK2MSFTNGP09.phx.gbl... >> Don't be angry Chris, but it doesn't work. >> I don't realize what Service Pack 2 Install to not permit the correct >> functioning of Tablet Input. >> >> Let me know, >> >> - Luca - >> >> "Chris H." <winxpnews********.com> ha scritto nel messaggio >> news:u%23Z0sMGwEHA.2908@tk2msftngp13.phx.gbl... >>> Luca, perhaps we should try this: Go to the Command Prompt (you can get >>> there by doing "cmd" without the quotes from Start/Run), then would you >>> enter "regsvr32 inkobj.dll" without the quotation marks, then Enter and >>> then "regsvr32 tpcps.dll" (without quotes) then Enter again. Restart >>> your machine after finishing each of those two modifications to the >>> Registry. >>> >>> If this doesn't correct the situation, then I would suggest booting into >>> Safe Mode (F8 or the appropriate Tablet button on boot-up) so no drivers >>> are loaded, and no programs are running, then do a reinstall of Windows >>> XP SP2 and the Tablet PC Edition 2005 over the top of what you have. >>> >>> This will not uninstall or wipe out any of your programs, but make sure >>> you've backed up your personal files just in case. >>> -- >>> Chris H. >>> Microsoft Windows MVP/Tablet PC >>> Tablet Creations - http://nicecreations.us/ >>> Associate Expert >>> Expert Zone - www.microsoft.com/windowsxp/expertzone >>> >>> >>> >>> "Luca" <keysteal@libero.it> wrote in message >>> news:%23UAjcZFwEHA.3416@TK2MSFTNGP09.phx.gbl... >>>> Hi Chris, >>>> >>>> When I try to run mscorcfg.msc from Start/Run it simply says that it >>>> doesn't >>>> find any program with that name. So I must search it throught Hd and >>>> run it directly from >>>> its directory. >>>> >>>> I launch the Framework correctly from Administrative Tools. >>>> >>>> I make a mistake, I mean with appearing that the panel is displaying as >>>> a keyboard meanwhile now it's >>>> only a window without the keyboard. Empty. >>>> >>>> "Chris H." <winxpnews********.com> ha scritto nel messaggio >>>> news:uK2mpVDwEHA.824@TK2MSFTNGP11.phx.gbl... >>>>> We should go step-by-step on this. Are you getting any error messages >>>>> when you attempt to start mscorcfg.msc from Start/Run, or is it just >>>>> not responding? If you go to Start/Run and put in "msc" without the >>>>> quotes, then tap the OK button, does that launch the Microsoft >>>>> Management Console without error? >>>>> >>>>> If you go into Control Panel/Administrative Tools do you see the >>>>> Microsoft .NET Framework 1.1 Configuration shortcut in there? Does it >>>>> launch properly from that location? >>>>> >>>>> When you say the Tablet Input Panel "disappeared" could you describe >>>>> exactly what you're seeing? Are you saying there is no icon in the >>>>> Taskbar area from which to launch the TIP? Are you saying it doesn't >>>>> launch when you tap that icon? >>>>> -- >>>>> Chris H. >>>>> Microsoft Windows MVP/Tablet PC >>>>> Tablet Creations - http://nicecreations.us/ >>>>> Associate Expert >>>>> Expert Zone - www.microsoft.com/windowsxp/expertzone >>>>> >>>>> >>>>> "Luca" <keysteal@libero.it> wrote in message >>>>> news:O$KzHxCwEHA.3292@TK2MSFTNGP15.phx.gbl... >>>>>> Dear Chris, >>>>>> >>>>>> thank for you patience. I tried to start mscorcfg.msc from Start/Run >>>>>> but it didn't start. >>>>>> So I installed .Net 1.1 from Microsoft, and tried again to start .msc >>>>>> from Start/Run, but nothing. >>>>>> I made a search trought my HD and I found it in c:\windows\microsoft >>>>>> .net\etc. After Start it directly from the .Net >>>>>> folder I find the version 1.1.4322.573. >>>>>> >>>>>> By the way, after installed the Framework the problem hasn't been >>>>>> solved. I de-installed the Service Pack 2 and Tablet >>>>>> Input appears again, after re-installing Service Pack 2 it >>>>>> disappeared. >>>>>> >>>>>> Really, I don't understand where it is the problem. >>>>>> >>>>>> "Chris H." <winxpnews********.com> ha scritto nel messaggio >>>>>> news:urqDIk8vEHA.536@TK2MSFTNGP11.phx.gbl... >>>>>>> What version of .NET framework do you have installed? If you go to >>>>>>> Start/Run and put in "mscorcfg.msc" without the quotes, are you able >>>>>>> to access the .NET configuration tools. If you do have .NET >>>>>>> installed and this doesn't work, if may be corrupt and need to be >>>>>>> updated/reinstalled. >>>>>>> >>>>>>> If you have an early version installed, the .NET 1.1 Service Pack 1 >>>>>>> is available here http://msdn.microsoft.com/netframework/ . Look >>>>>>> under the Framework Downloads link. >>>>>>> -- >>>>>>> Chris H. >>>>>>> Microsoft Windows MVP/Tablet PC >>>>>>> Tablet Creations - http://nicecreations.us/ >>>>>>> Associate Expert >>>>>>> Expert Zone - www.microsoft.com/windowsxp/expertzone >>>>>>> >>>>>>> >>>>>>> >>>>>>> "Luca" <keysteal@libero.it> wrote in message >>>>>>> news:%23y$4dl6vEHA.2804@TK2MSFTNGP14.phx.gbl... >>>>>>>> Hi Chris, >>>>>>>> >>>>>>>> Nothing to do. I re-registered that two dlls, but nothing has >>>>>>>> changed. I saw details (in Advaced Text Services), and even if I >>>>>>>> have installed Office 2003, I see only that three Services you >>>>>>>> described in your last message and not four. I don't understand >>>>>>>> what is wrong. >>>>>>>> >>>>>>>> "Chris H." <winxpnews********.com> ha scritto nel messaggio >>>>>>>> news:<Ongvot2vEHA.1300@TK2MSFTNGP14.phx.gbl>... >>>>>>>> >>>>>>>>> If your Details button on the Languages tab are correct, Luca, you >>>>>>>> >>>>>>>>> should have Advanced Text Services which includes Tablet PC >>>>>>>> >>>>>>>>> Correction, Tablet PC Correction for Windows Journal and Tablet PC >>>>>>>> >>>>>>>>> Text Insertion. (If you have Office 2003 installed you will also >>>>>>>>> have >>>>>>>> >>>>>>>>> a fourth entry.) >>>>>>>> >>>>>>>>> >>>>>>>> >>>>>>>>> If that is all proper, try going to the Command Prompt (not >>>>>>>>> Start/Run) >>>>>>>> >>>>>>>>> and enter "regsvr32 inkobj.dll" without the quotation marks, then >>>>>>>> >>>>>>>>> Enter and then >>>>>>>> >>>>>>>>> "regsvr32 tpcps.dll" (without quotes) then Enter again. Restart >>>>>>>>> your >>>>>>>> >>>>>>>>> machine after finishing each of those two modifications to the >>>>>>>>> Registry. >>>>>>>> >>>>>>>>> -- >>>>>>>> >>>>>>>>> Chris H. >>>>>>>> >>>>>>>>> Microsoft Windows MVP/Tablet PC >>>>>>>> >>>>>>>>> Tablet Creations - http://nicecreations.us/ Associate Expert >>>>>>>>> Expert >>>>>>>> >>>>>>>>> Zone - www.microsoft.com/windowsxp/expertzone >>>>>>>> >>>>>>>>> >>>>>>>> >>>>>>>>> "Luca" <keysteal@libero.it> wrote in message >>>>>>>> >>>>>>>>> news:ugHtVz1vEHA.2120@TK2MSFTNGP14.phx.gbl... >>>>>>>> >>>>>>>>> > Hi to all, >>>>>>>> >>>>>>>>> > >>>>>>>> >>>>>>>>> > after installing Service Pack 2, when I click into Input Panel >>>>>>>>> > it >>>>>>>> >>>>>>>>> > appears a system error that says: >>>>>>>> >>>>>>>>> > >>>>>>>> >>>>>>>>> > AppName: Tabtip.exe AppVer: 1.7.200.2180 ModName: ntdll.dll >>>>>>>> >>>>>>>>> > ModVer: 5.1.2600.2180 Offset: 00010370 >>>>>>>> >>>>>>>>> > >>>>>>>> >>>>>>>>> > I follow some suggestions on the net, in particular to set the >>>>>>>> >>>>>>>>> > proper keyboard language (italian), but nothing has changed and >>>>>>>> >>>>>>>>> > already have this error. I wouldn't uninstall Service Pack 2, >>>>>>>>> > some >>>>>>>> >>>>>>>>> > of Tablet Users have solved this problem? >>>>>>>> >>>>>>>>> > >>>>>>>> >>>>>>>>> > Thank you, >>>>>>>> >>>>>>>>> > >>>>>>>> >>>>>>>>> > - Luca - >>>>>>>> >>>>>>>>> > >>>>>>>> >>>>>>>>> >>>>>>>> >>>>>>>>> >>>>>>>> >>>>>>>> >>>>>>> >>>>>>> >>>>>> >>>>>> >>>>> >>>>> >>>> >>>> >>> >>> >> >> > > |
|
11-02-2004, 05:15 PM
| |||
| |||
| Re: ntdll.dll tabtip.exe error after installing Sp2 Okay, perhaps we should take a wild stab at a different direction. You're running anti-virus software, correct, with the latest definitions? If so, please use that to do a thorough check of your system. After you've done that, if you have parasite and Trojan detecting software available, please update the definitions and then run those. You may also be interested in the information on parasites and Trojans here: www.aumha.org/secure. With all that out of the way - and the main reason I'm asking you to do that - I would like you to go into Windows Explorer and locate and verify the inkobj.dll and tpcps.dll files are in the folder at C:\Program Files\Common Files\Microsoft Shared\Ink . When you find those files, please right-click each of them individually and select Properties. Then tap the Version tab and in the Item name: pane tap File Version. Right-click the result in the right pane and select "Copy." Then paste that information into your response post here for each of the files. -- Chris H. Microsoft Windows MVP/Tablet PC Tablet Creations - http://nicecreations.us/ Associate Expert Expert Zone - www.microsoft.com/windowsxp/expertzone "Luca" <keysteal@libero.it> wrote in message news:O$rhLdRwEHA.3096@TK2MSFTNGP14.phx.gbl... > Hi Chris (again), > > it means that it's as before, so the table input is empty when Windows Xp > starts, and when I login > to the system and when I try to run the table input from the icon it > returns with a system error (ntdll.dll > and tabtip.exe). So, nothing has changed. > > "Chris H." <winxpnews********.com> ha scritto nel messaggio > news:uaz4koOwEHA.2540@TK2MSFTNGP09.phx.gbl... >> Luca, I'm only bothered that it isn't working correctly, and trying to >> help you figure out what's wrong. Not to worry. >> >> When you say it "doesn't work" could you give me the exact details of >> what happened? Did it fail with an error message? Did it not find the >> files I said to run the Registry fixes on? >> >> If I don't have details - (1) I followed your instructions and (2) this >> is what happened - I have no way of knowing which way to try what next. >> 8-) >> -- >> Chris H. >> Microsoft Windows MVP/Tablet PC >> Tablet Creations - http://nicecreations.us/ >> Associate Expert >> Expert Zone - www.microsoft.com/windowsxp/expertzone >> >> >> "Luca" <keysteal@libero.it> wrote in message >> news:uHz6mkLwEHA.1564@TK2MSFTNGP09.phx.gbl... >>> Don't be angry Chris, but it doesn't work. >>> I don't realize what Service Pack 2 Install to not permit the correct >>> functioning of Tablet Input. >>> >>> Let me know, >>> >>> - Luca - >>> >>> "Chris H." <winxpnews********.com> ha scritto nel messaggio >>> news:u%23Z0sMGwEHA.2908@tk2msftngp13.phx.gbl... >>>> Luca, perhaps we should try this: Go to the Command Prompt (you can >>>> get there by doing "cmd" without the quotes from Start/Run), then would >>>> you enter "regsvr32 inkobj.dll" without the quotation marks, then Enter >>>> and then "regsvr32 tpcps.dll" (without quotes) then Enter again. >>>> Restart your machine after finishing each of those two modifications to >>>> the Registry. >>>> >>>> If this doesn't correct the situation, then I would suggest booting >>>> into Safe Mode (F8 or the appropriate Tablet button on boot-up) so no >>>> drivers are loaded, and no programs are running, then do a reinstall of >>>> Windows XP SP2 and the Tablet PC Edition 2005 over the top of what you >>>> have. >>>> >>>> This will not uninstall or wipe out any of your programs, but make sure >>>> you've backed up your personal files just in case. >>>> -- >>>> Chris H. >>>> Microsoft Windows MVP/Tablet PC >>>> Tablet Creations - http://nicecreations.us/ >>>> Associate Expert >>>> Expert Zone - www.microsoft.com/windowsxp/expertzone >>>> >>>> >>>> >>>> "Luca" <keysteal@libero.it> wrote in message >>>> news:%23UAjcZFwEHA.3416@TK2MSFTNGP09.phx.gbl... >>>>> Hi Chris, >>>>> >>>>> When I try to run mscorcfg.msc from Start/Run it simply says that it >>>>> doesn't >>>>> find any program with that name. So I must search it throught Hd and >>>>> run it directly from >>>>> its directory. >>>>> >>>>> I launch the Framework correctly from Administrative Tools. >>>>> >>>>> I make a mistake, I mean with appearing that the panel is displaying >>>>> as a keyboard meanwhile now it's >>>>> only a window without the keyboard. Empty. >>>>> >>>>> "Chris H." <winxpnews********.com> ha scritto nel messaggio >>>>> news:uK2mpVDwEHA.824@TK2MSFTNGP11.phx.gbl... >>>>>> We should go step-by-step on this. Are you getting any error >>>>>> messages when you attempt to start mscorcfg.msc from Start/Run, or is >>>>>> it just not responding? If you go to Start/Run and put in "msc" >>>>>> without the quotes, then tap the OK button, does that launch the >>>>>> Microsoft Management Console without error? >>>>>> >>>>>> If you go into Control Panel/Administrative Tools do you see the >>>>>> Microsoft .NET Framework 1.1 Configuration shortcut in there? Does >>>>>> it launch properly from that location? >>>>>> >>>>>> When you say the Tablet Input Panel "disappeared" could you describe >>>>>> exactly what you're seeing? Are you saying there is no icon in the >>>>>> Taskbar area from which to launch the TIP? Are you saying it doesn't >>>>>> launch when you tap that icon? >>>>>> -- >>>>>> Chris H. >>>>>> Microsoft Windows MVP/Tablet PC >>>>>> Tablet Creations - http://nicecreations.us/ >>>>>> Associate Expert >>>>>> Expert Zone - www.microsoft.com/windowsxp/expertzone >>>>>> >>>>>> >>>>>> "Luca" <keysteal@libero.it> wrote in message >>>>>> news:O$KzHxCwEHA.3292@TK2MSFTNGP15.phx.gbl... >>>>>>> Dear Chris, >>>>>>> >>>>>>> thank for you patience. I tried to start mscorcfg.msc from Start/Run >>>>>>> but it didn't start. >>>>>>> So I installed .Net 1.1 from Microsoft, and tried again to start >>>>>>> .msc from Start/Run, but nothing. >>>>>>> I made a search trought my HD and I found it in c:\windows\microsoft >>>>>>> .net\etc. After Start it directly from the .Net >>>>>>> folder I find the version 1.1.4322.573. >>>>>>> >>>>>>> By the way, after installed the Framework the problem hasn't been >>>>>>> solved. I de-installed the Service Pack 2 and Tablet >>>>>>> Input appears again, after re-installing Service Pack 2 it >>>>>>> disappeared. >>>>>>> >>>>>>> Really, I don't understand where it is the problem. >>>>>>> >>>>>>> "Chris H." <winxpnews********.com> ha scritto nel messaggio >>>>>>> news:urqDIk8vEHA.536@TK2MSFTNGP11.phx.gbl... >>>>>>>> What version of .NET framework do you have installed? If you go to >>>>>>>> Start/Run and put in "mscorcfg.msc" without the quotes, are you >>>>>>>> able to access the .NET configuration tools. If you do have .NET >>>>>>>> installed and this doesn't work, if may be corrupt and need to be >>>>>>>> updated/reinstalled. >>>>>>>> >>>>>>>> If you have an early version installed, the .NET 1.1 Service Pack 1 >>>>>>>> is available here http://msdn.microsoft.com/netframework/ . Look >>>>>>>> under the Framework Downloads link. >>>>>>>> -- >>>>>>>> Chris H. >>>>>>>> Microsoft Windows MVP/Tablet PC >>>>>>>> Tablet Creations - http://nicecreations.us/ >>>>>>>> Associate Expert >>>>>>>> Expert Zone - www.microsoft.com/windowsxp/expertzone >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> "Luca" <keysteal@libero.it> wrote in message >>>>>>>> news:%23y$4dl6vEHA.2804@TK2MSFTNGP14.phx.gbl... >>>>>>>>> Hi Chris, >>>>>>>>> >>>>>>>>> Nothing to do. I re-registered that two dlls, but nothing has >>>>>>>>> changed. I saw details (in Advaced Text Services), and even if I >>>>>>>>> have installed Office 2003, I see only that three Services you >>>>>>>>> described in your last message and not four. I don't understand >>>>>>>>> what is wrong. >>>>>>>>> >>>>>>>>> "Chris H." <winxpnews********.com> ha scritto nel messaggio >>>>>>>>> news:<Ongvot2vEHA.1300@TK2MSFTNGP14.phx.gbl>... >>>>>>>>> >>>>>>>>>> If your Details button on the Languages tab are correct, Luca, >>>>>>>>>> you >>>>>>>>> >>>>>>>>>> should have Advanced Text Services which includes Tablet PC >>>>>>>>> >>>>>>>>>> Correction, Tablet PC Correction for Windows Journal and Tablet >>>>>>>>>> PC >>>>>>>>> >>>>>>>>>> Text Insertion. (If you have Office 2003 installed you will also >>>>>>>>>> have >>>>>>>>> >>>>>>>>>> a fourth entry.) >>>>>>>>> >>>>>>>>>> >>>>>>>>> >>>>>>>>>> If that is all proper, try going to the Command Prompt (not >>>>>>>>>> Start/Run) >>>>>>>>> >>>>>>>>>> and enter "regsvr32 inkobj.dll" without the quotation marks, then >>>>>>>>> >>>>>>>>>> Enter and then >>>>>>>>> >>>>>>>>>> "regsvr32 tpcps.dll" (without quotes) then Enter again. Restart >>>>>>>>>> your >>>>>>>>> >>>>>>>>>> machine after finishing each of those two modifications to the >>>>>>>>>> Registry. >>>>>>>>> >>>>>>>>>> -- >>>>>>>>> >>>>>>>>>> Chris H. >>>>>>>>> >>>>>>>>>> Microsoft Windows MVP/Tablet PC >>>>>>>>> >>>>>>>>>> Tablet Creations - http://nicecreations.us/ Associate Expert >>>>>>>>>> Expert >>>>>>>>> >>>>>>>>>> Zone - www.microsoft.com/windowsxp/expertzone >>>>>>>>> >>>>>>>>>> >>>>>>>>> >>>>>>>>>> "Luca" <keysteal@libero.it> wrote in message >>>>>>>>> >>>>>>>>>> news:ugHtVz1vEHA.2120@TK2MSFTNGP14.phx.gbl... >>>>>>>>> >>>>>>>>>> > Hi to all, >>>>>>>>> >>>>>>>>>> > >>>>>>>>> >>>>>>>>>> > after installing Service Pack 2, when I click into Input Panel >>>>>>>>>> > it >>>>>>>>> >>>>>>>>>> > appears a system error that says: >>>>>>>>> >>>>>>>>>> > >>>>>>>>> >>>>>>>>>> > AppName: Tabtip.exe AppVer: 1.7.200.2180 ModName: ntdll.dll >>>>>>>>> >>>>>>>>>> > ModVer: 5.1.2600.2180 Offset: 00010370 >>>>>>>>> >>>>>>>>>> > >>>>>>>>> >>>>>>>>>> > I follow some suggestions on the net, in particular to set the >>>>>>>>> >>>>>>>>>> > proper keyboard language (italian), but nothing has changed and >>>>>>>>> >>>>>>>>>> > already have this error. I wouldn't uninstall Service Pack 2, >>>>>>>>>> > some >>>>>>>>> >>>>>>>>>> > of Tablet Users have solved this problem? >>>>>>>>> >>>>>>>>>> > >>>>>>>>> >>>>>>>>>> > Thank you, >>>>>>>>> >>>>>>>>>> > >>>>>>>>> >>>>>>>>>> > - Luca - >>>>>>>>> >>>>>>>>>> > >>>>>>>>> >>>>>>>>>> >>>>>>>>> >>>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>> >>>>>>>> >>>>>>> >>>>>>> >>>>>> >>>>>> >>>>> >>>>> >>>> >>>> >>> >>> >> >> > > |
|
11-02-2004, 07:16 PM
| |||
| |||
| Re: ntdll.dll tabtip.exe error after installing Sp2 Well Chris, It's a clean installation of Windows Xp Tablet so it's very hard to find it some viruses or adware, by the way I did it and I find two files suspect to be adware (but it was a backup copy of a previous installation). I removed them. These are informations about two files: Inkobj.Dll File Version: 2.7.2600.2180 File Version: 2.7.2600.2180 (xpsp_sp2_rtm.040803-2158) Language: English (United States) TcpPs.Dll File Version: 1.0.2201.0 File Version: 1.0.2201.0 (xpsp1.020828-1920) Language: English (United States) "Chris H." <winxpnews********.com> ha scritto nel messaggio news:eLPiWxRwEHA.2908@tk2msftngp13.phx.gbl... > Okay, perhaps we should take a wild stab at a different direction. You're > running anti-virus software, correct, with the latest definitions? If so, > please use that to do a thorough check of your system. > > After you've done that, if you have parasite and Trojan detecting software > available, please update the definitions and then run those. You may also > be interested in the information on parasites and Trojans here: > www.aumha.org/secure. > > With all that out of the way - and the main reason I'm asking you to do > that - I would like you to go into Windows Explorer and locate and verify > the inkobj.dll and tpcps.dll files are in the folder at C:\Program > Files\Common Files\Microsoft Shared\Ink . > > When you find those files, please right-click each of them individually > and select Properties. Then tap the Version tab and in the Item name: > pane tap File Version. Right-click the result in the right pane and > select "Copy." Then paste that information into your response post here > for each of the files. > -- > Chris H. > Microsoft Windows MVP/Tablet PC > Tablet Creations - http://nicecreations.us/ > Associate Expert > Expert Zone - www.microsoft.com/windowsxp/expertzone > > > "Luca" <keysteal@libero.it> wrote in message > news:O$rhLdRwEHA.3096@TK2MSFTNGP14.phx.gbl... >> Hi Chris (again), >> >> it means that it's as before, so the table input is empty when Windows Xp >> starts, and when I login >> to the system and when I try to run the table input from the icon it >> returns with a system error (ntdll.dll >> and tabtip.exe). So, nothing has changed. >> >> "Chris H." <winxpnews********.com> ha scritto nel messaggio >> news:uaz4koOwEHA.2540@TK2MSFTNGP09.phx.gbl... >>> Luca, I'm only bothered that it isn't working correctly, and trying to >>> help you figure out what's wrong. Not to worry. >>> >>> When you say it "doesn't work" could you give me the exact details of >>> what happened? Did it fail with an error message? Did it not find the >>> files I said to run the Registry fixes on? >>> >>> If I don't have details - (1) I followed your instructions and (2) this >>> is what happened - I have no way of knowing which way to try what next. >>> 8-) >>> -- >>> Chris H. >>> Microsoft Windows MVP/Tablet PC >>> Tablet Creations - http://nicecreations.us/ >>> Associate Expert >>> Expert Zone - www.microsoft.com/windowsxp/expertzone >>> >>> >>> "Luca" <keysteal@libero.it> wrote in message >>> news:uHz6mkLwEHA.1564@TK2MSFTNGP09.phx.gbl... >>>> Don't be angry Chris, but it doesn't work. >>>> I don't realize what Service Pack 2 Install to not permit the correct >>>> functioning of Tablet Input. >>>> >>>> Let me know, >>>> >>>> - Luca - >>>> >>>> "Chris H." <winxpnews********.com> ha scritto nel messaggio >>>> news:u%23Z0sMGwEHA.2908@tk2msftngp13.phx.gbl... >>>>> Luca, perhaps we should try this: Go to the Command Prompt (you can >>>>> get there by doing "cmd" without the quotes from Start/Run), then >>>>> would you enter "regsvr32 inkobj.dll" without the quotation marks, >>>>> then Enter and then "regsvr32 tpcps.dll" (without quotes) then Enter >>>>> again. Restart your machine after finishing each of those two >>>>> modifications to the Registry. >>>>> >>>>> If this doesn't correct the situation, then I would suggest booting >>>>> into Safe Mode (F8 or the appropriate Tablet button on boot-up) so no >>>>> drivers are loaded, and no programs are running, then do a reinstall >>>>> of Windows XP SP2 and the Tablet PC Edition 2005 over the top of what >>>>> you have. >>>>> >>>>> This will not uninstall or wipe out any of your programs, but make >>>>> sure you've backed up your personal files just in case. >>>>> -- >>>>> Chris H. >>>>> Microsoft Windows MVP/Tablet PC >>>>> Tablet Creations - http://nicecreations.us/ >>>>> Associate Expert >>>>> Expert Zone - www.microsoft.com/windowsxp/expertzone >>>>> >>>>> >>>>> >>>>> "Luca" <keysteal@libero.it> wrote in message >>>>> news:%23UAjcZFwEHA.3416@TK2MSFTNGP09.phx.gbl... >>>>>> Hi Chris, >>>>>> >>>>>> When I try to run mscorcfg.msc from Start/Run it simply says that it >>>>>> doesn't >>>>>> find any program with that name. So I must search it throught Hd and >>>>>> run it directly from >>>>>> its directory. >>>>>> >>>>>> I launch the Framework correctly from Administrative Tools. >>>>>> >>>>>> I make a mistake, I mean with appearing that the panel is displaying >>>>>> as a keyboard meanwhile now it's >>>>>> only a window without the keyboard. Empty. >>>>>> >>>>>> "Chris H." <winxpnews********.com> ha scritto nel messaggio >>>>>> news:uK2mpVDwEHA.824@TK2MSFTNGP11.phx.gbl... >>>>>>> We should go step-by-step on this. Are you getting any error >>>>>>> messages when you attempt to start mscorcfg.msc from Start/Run, or >>>>>>> is it just not responding? If you go to Start/Run and put in "msc" >>>>>>> without the quotes, then tap the OK button, does that launch the >>>>>>> Microsoft Management Console without error? >>>>>>> >>>>>>> If you go into Control Panel/Administrative Tools do you see the >>>>>>> Microsoft .NET Framework 1.1 Configuration shortcut in there? Does >>>>>>> it launch properly from that location? >>>>>>> >>>>>>> When you say the Tablet Input Panel "disappeared" could you describe >>>>>>> exactly what you're seeing? Are you saying there is no icon in the >>>>>>> Taskbar area from which to launch the TIP? Are you saying it >>>>>>> doesn't launch when you tap that icon? >>>>>>> -- >>>>>>> Chris H. >>>>>>> Microsoft Windows MVP/Tablet PC >>>>>>> Tablet Creations - http://nicecreations.us/ >>>>>>> Associate Expert >>>>>>> Expert Zone - www.microsoft.com/windowsxp/expertzone >>>>>>> >>>>>>> >>>>>>> "Luca" <keysteal@libero.it> wrote in message >>>>>>> news:O$KzHxCwEHA.3292@TK2MSFTNGP15.phx.gbl... >>>>>>>> Dear Chris, >>>>>>>> >>>>>>>> thank for you patience. I tried to start mscorcfg.msc from >>>>>>>> Start/Run but it didn't start. >>>>>>>> So I installed .Net 1.1 from Microsoft, and tried again to start >>>>>>>> .msc from Start/Run, but nothing. >>>>>>>> I made a search trought my HD and I found it in >>>>>>>> c:\windows\microsoft .net\etc. After Start it directly from the >>>>>>>> .Net >>>>>>>> folder I find the version 1.1.4322.573. >>>>>>>> >>>>>>>> By the way, after installed the Framework the problem hasn't been >>>>>>>> solved. I de-installed the Service Pack 2 and Tablet >>>>>>>> Input appears again, after re-installing Service Pack 2 it >>>>>>>> disappeared. >>>>>>>> >>>>>>>> Really, I don't understand where it is the problem. >>>>>>>> >>>>>>>> "Chris H." <winxpnews********.com> ha scritto nel messaggio >>>>>>>> news:urqDIk8vEHA.536@TK2MSFTNGP11.phx.gbl... >>>>>>>>> What version of .NET framework do you have installed? If you go >>>>>>>>> to Start/Run and put in "mscorcfg.msc" without the quotes, are you >>>>>>>>> able to access the .NET configuration tools. If you do have .NET >>>>>>>>> installed and this doesn't work, if may be corrupt and need to be >>>>>>>>> updated/reinstalled. >>>>>>>>> >>>>>>>>> If you have an early version installed, the .NET 1.1 Service Pack >>>>>>>>> 1 is available here http://msdn.microsoft.com/netframework/ . >>>>>>>>> Look under the Framework Downloads link. >>>>>>>>> -- >>>>>>>>> Chris H. >>>>>>>>> Microsoft Windows MVP/Tablet PC >>>>>>>>> Tablet Creations - http://nicecreations.us/ >>>>>>>>> Associate Expert >>>>>>>>> Expert Zone - www.microsoft.com/windowsxp/expertzone >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> "Luca" <keysteal@libero.it> wrote in message >>>>>>>>> news:%23y$4dl6vEHA.2804@TK2MSFTNGP14.phx.gbl... >>>>>>>>>> Hi Chris, >>>>>>>>>> >>>>>>>>>> Nothing to do. I re-registered that two dlls, but nothing has >>>>>>>>>> changed. I saw details (in Advaced Text Services), and even if I >>>>>>>>>> have installed Office 2003, I see only that three Services you >>>>>>>>>> described in your last message and not four. I don't understand >>>>>>>>>> what is wrong. >>>>>>>>>> >>>>>>>>>> "Chris H." <winxpnews********.com> ha scritto nel messaggio >>>>>>>>>> news:<Ongvot2vEHA.1300@TK2MSFTNGP14.phx.gbl>... >>>>>>>>>> >>>>>>>>>>> If your Details button on the Languages tab are correct, Luca, >>>>>>>>>>> you >>>>>>>>>> >>>>>>>>>>> should have Advanced Text Services which includes Tablet PC >>>>>>>>>> >>>>>>>>>>> Correction, Tablet PC Correction for Windows Journal and Tablet >>>>>>>>>>> PC >>>>>>>>>> >>>>>>>>>>> Text Insertion. (If you have Office 2003 installed you will also >>>>>>>>>>> have >>>>>>>>>> >>>>>>>>>>> a fourth entry.) >>>>>>>>>> >>>>>>>>>>> >>>>>>>>>> >>>>>>>>>>> If that is all proper, try going to the Command Prompt (not >>>>>>>>>>> Start/Run) >>>>>>>>>> >>>>>>>>>>> and enter "regsvr32 inkobj.dll" without the quotation marks, >>>>>>>>>>> then >>>>>>>>>> >>>>>>>>>>> Enter and then >>>>>>>>>> >>>>>>>>>>> "regsvr32 tpcps.dll" (without quotes) then Enter again. Restart >>>>>>>>>>> your >>>>>>>>>> >>>>>>>>>>> machine after finishing each of those two modifications to the >>>>>>>>>>> Registry. >>>>>>>>>> >>>>>>>>>>> -- >>>>>>>>>> >>>>>>>>>>> Chris H. >>>>>>>>>> >>>>>>>>>>> Microsoft Windows MVP/Tablet PC >>>>>>>>>> >>>>>>>>>>> Tablet Creations - http://nicecreations.us/ Associate Expert >>>>>>>>>>> Expert >>>>>>>>>> >>>>>>>>>>> Zone - www.microsoft.com/windowsxp/expertzone >>>>>>>>>> >>>>>>>>>>> >>>>>>>>>> >>>>>>>>>>> "Luca" <keysteal@libero.it> wrote in message >>>>>>>>>> >>>>>>>>>>> news:ugHtVz1vEHA.2120@TK2MSFTNGP14.phx.gbl... >>>>>>>>>> >>>>>>>>>>> > Hi to all, >>>>>>>>>> >>>>>>>>>>> > >>>>>>>>>> >>>>>>>>>>> > after installing Service Pack 2, when I click into Input Panel >>>>>>>>>>> > it >>>>>>>>>> >>>>>>>>>>> > appears a system error that says: >>>>>>>>>> >>>>>>>>>>> > >>>>>>>>>> >>>>>>>>>>> > AppName: Tabtip.exe AppVer: 1.7.200.2180 ModName: ntdll.dll >>>>>>>>>> >>>>>>>>>>> > ModVer: 5.1.2600.2180 Offset: 00010370 >>>>>>>>>> >>>>>>>>>>> > >>>>>>>>>> >>>>>>>>>>> > I follow some suggestions on the net, in particular to set the >>>>>>>>>> >>>>>>>>>>> > proper keyboard language (italian), but nothing has changed >>>>>>>>>>> > and >>>>>>>>>> >>>>>>>>>>> > already have this error. I wouldn't uninstall Service Pack 2, >>>>>>>>>>> > some >>>>>>>>>> >>>>>>>>>>> > of Tablet Users have solved this problem? >>>>>>>>>> >>>>>>>>>>> > >>>>>>>>>> >>>>>>>>>>> > Thank you, >>>>>>>>>> >>>>>>>>>>> > >>>>>>>>>> >>>>>>>>>>> > - Luca - >>>>>>>>>> >>>>>>>>>>> > >>>>>>>>>> >>>>>>>>>>> >>>>>>>>>> >>>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>> >>>>>>>> >>>>>>> >>>>>>> >>>>>> >>>>>> >>>>> >>>>> >>>> >>>> >>> >>> >> >> > > |
|
11-02-2004, 08:15 PM
| |||
| |||
| Re: ntdll.dll tabtip.exe error after installing Sp2 Those are the correct files, according to my installation here. Did you run the regsrv32 portion we talked about previously at the Command Prompt within that directory? This was: At the Command Prompt (within the C:\Program Files\Common Files\Microsoft Shared\Ink enter "regsvr32 inkobj.dll" without the quotation marks, then Enter and then "regsvr32 tpcps.dll" (without quotes) then Enter again. Restart your machine after finishing each of those two modifications to the Registry. -- Chris H. Microsoft Windows MVP/Tablet PC Tablet Creations - http://nicecreations.us/ Associate Expert Expert Zone - www.microsoft.com/windowsxp/expertzone "Luca" <keysteal@libero.it> wrote in message news:uLCYsBTwEHA.2012@TK2MSFTNGP15.phx.gbl... > Well Chris, > > It's a clean installation of Windows Xp Tablet so it's very hard to find > it some viruses or adware, by the way > I did it and I find two files suspect to be adware (but it was a backup > copy of a previous installation). I removed them. > > These are informations about two files: > > Inkobj.Dll > > File Version: 2.7.2600.2180 > > File Version: 2.7.2600.2180 (xpsp_sp2_rtm.040803-2158) > Language: English (United States) > > TcpPs.Dll > > File Version: 1.0.2201.0 > > File Version: 1.0.2201.0 (xpsp1.020828-1920) > Language: English (United States) > > "Chris H." <winxpnews********.com> ha scritto nel messaggio > news:eLPiWxRwEHA.2908@tk2msftngp13.phx.gbl... >> Okay, perhaps we should take a wild stab at a different direction. >> You're running anti-virus software, correct, with the latest definitions? >> If so, please use that to do a thorough check of your system. >> >> After you've done that, if you have parasite and Trojan detecting >> software available, please update the definitions and then run those. >> You may also be interested in the information on parasites and Trojans >> here: www.aumha.org/secure. >> >> With all that out of the way - and the main reason I'm asking you to do >> that - I would like you to go into Windows Explorer and locate and verify >> the inkobj.dll and tpcps.dll files are in the folder at C:\Program >> Files\Common Files\Microsoft Shared\Ink . >> >> When you find those files, please right-click each of them individually >> and select Properties. Then tap the Version tab and in the Item name: >> pane tap File Version. Right-click the result in the right pane and >> select "Copy." Then paste that information into your response post here >> for each of the files. >> -- >> Chris H. >> Microsoft Windows MVP/Tablet PC >> Tablet Creations - http://nicecreations.us/ >> Associate Expert >> Expert Zone - www.microsoft.com/windowsxp/expertzone >> >> >> "Luca" <keysteal@libero.it> wrote in message >> news:O$rhLdRwEHA.3096@TK2MSFTNGP14.phx.gbl... >>> Hi Chris (again), >>> >>> it means that it's as before, so the table input is empty when Windows >>> Xp starts, and when I login >>> to the system and when I try to run the table input from the icon it >>> returns with a system error (ntdll.dll >>> and tabtip.exe). So, nothing has changed. >>> >>> "Chris H." <winxpnews********.com> ha scritto nel messaggio >>> news:uaz4koOwEHA.2540@TK2MSFTNGP09.phx.gbl... >>>> Luca, I'm only bothered that it isn't working correctly, and trying to >>>> help you figure out what's wrong. Not to worry. >>>> >>>> When you say it "doesn't work" could you give me the exact details of >>>> what happened? Did it fail with an error message? Did it not find the >>>> files I said to run the Registry fixes on? >>>> >>>> If I don't have details - (1) I followed your instructions and (2) this >>>> is what happened - I have no way of knowing which way to try what next. >>>> 8-) >>>> -- >>>> Chris H. >>>> Microsoft Windows MVP/Tablet PC >>>> Tablet Creations - http://nicecreations.us/ >>>> Associate Expert >>>> Expert Zone - www.microsoft.com/windowsxp/expertzone >>>> >>>> >>>> "Luca" <keysteal@libero.it> wrote in message >>>> news:uHz6mkLwEHA.1564@TK2MSFTNGP09.phx.gbl... >>>>> Don't be angry Chris, but it doesn't work. >>>>> I don't realize what Service Pack 2 Install to not permit the correct >>>>> functioning of Tablet Input. >>>>> >>>>> Let me know, >>>>> >>>>> - Luca - >>>>> >>>>> "Chris H." <winxpnews********.com> ha scritto nel messaggio >>>>> news:u%23Z0sMGwEHA.2908@tk2msftngp13.phx.gbl... >>>>>> Luca, perhaps we should try this: Go to the Command Prompt (you can >>>>>> get there by doing "cmd" without the quotes from Start/Run), then >>>>>> would you enter "regsvr32 inkobj.dll" without the quotation marks, >>>>>> then Enter and then "regsvr32 tpcps.dll" (without quotes) then Enter >>>>>> again. Restart your machine after finishing each of those two >>>>>> modifications to the Registry. >>>>>> >>>>>> If this doesn't correct the situation, then I would suggest booting >>>>>> into Safe Mode (F8 or the appropriate Tablet button on boot-up) so no >>>>>> drivers are loaded, and no programs are running, then do a reinstall >>>>>> of Windows XP SP2 and the Tablet PC Edition 2005 over the top of what >>>>>> you have. >>>>>> >>>>>> This will not uninstall or wipe out any of your programs, but make >>>>>> sure you've backed up your personal files just in case. >>>>>> -- >>>>>> Chris H. >>>>>> Microsoft Windows MVP/Tablet PC >>>>>> Tablet Creations - http://nicecreations.us/ >>>>>> Associate Expert >>>>>> Expert Zone - www.microsoft.com/windowsxp/expertzone >>>>>> >>>>>> >>>>>> >>>>>> "Luca" <keysteal@libero.it> wrote in message >>>>>> news:%23UAjcZFwEHA.3416@TK2MSFTNGP09.phx.gbl... >>>>>>> Hi Chris, >>>>>>> >>>>>>> When I try to run mscorcfg.msc from Start/Run it simply says that it >>>>>>> doesn't >>>>>>> find any program with that name. So I must search it throught Hd and >>>>>>> run it directly from >>>>>>> its directory. >>>>>>> >>>>>>> I launch the Framework correctly from Administrative Tools. >>>>>>> >>>>>>> I make a mistake, I mean with appearing that the panel is displaying >>>>>>> as a keyboard meanwhile now it's >>>>>>> only a window without the keyboard. Empty. >>>>>>> >>>>>>> "Chris H." <winxpnews********.com> ha scritto nel messaggio >>>>>>> news:uK2mpVDwEHA.824@TK2MSFTNGP11.phx.gbl... >>>>>>>> We should go step-by-step on this. Are you getting any error >>>>>>>> messages when you attempt to start mscorcfg.msc from Start/Run, or >>>>>>>> is it just not responding? If you go to Start/Run and put in "msc" >>>>>>>> without the quotes, then tap the OK button, does that launch the >>>>>>>> Microsoft Management Console without error? >>>>>>>> >>>>>>>> If you go into Control Panel/Administrative Tools do you see the >>>>>>>> Microsoft .NET Framework 1.1 Configuration shortcut in there? Does >>>>>>>> it launch properly from that location? >>>>>>>> >>>>>>>> When you say the Tablet Input Panel "disappeared" could you >>>>>>>> describe exactly what you're seeing? Are you saying there is no >>>>>>>> icon in the Taskbar area from which to launch the TIP? Are you >>>>>>>> saying it doesn't launch when you tap that icon? >>>>>>>> -- >>>>>>>> Chris H. >>>>>>>> Microsoft Windows MVP/Tablet PC >>>>>>>> Tablet Creations - http://nicecreations.us/ >>>>>>>> Associate Expert >>>>>>>> Expert Zone - www.microsoft.com/windowsxp/expertzone >>>>>>>> >>>>>>>> >>>>>>>> "Luca" <keysteal@libero.it> wrote in message >>>>>>>> news:O$KzHxCwEHA.3292@TK2MSFTNGP15.phx.gbl... >>>>>>>>> Dear Chris, >>>>>>>>> >>>>>>>>> thank for you patience. I tried to start mscorcfg.msc from >>>>>>>>> Start/Run but it didn't start. >>>>>>>>> So I installed .Net 1.1 from Microsoft, and tried again to start >>>>>>>>> .msc from Start/Run, but nothing. >>>>>>>>> I made a search trought my HD and I found it in >>>>>>>>> c:\windows\microsoft .net\etc. After Start it directly from the >>>>>>>>> .Net >>>>>>>>> folder I find the version 1.1.4322.573. >>>>>>>>> >>>>>>>>> By the way, after installed the Framework the problem hasn't been >>>>>>>>> solved. I de-installed the Service Pack 2 and Tablet >>>>>>>>> Input appears again, after re-installing Service Pack 2 it >>>>>>>>> disappeared. >>>>>>>>> >>>>>>>>> Really, I don't understand where it is the problem. >>>>>>>>> >>>>>>>>> "Chris H." <winxpnews********.com> ha scritto nel messaggio >>>>>>>>> news:urqDIk8vEHA.536@TK2MSFTNGP11.phx.gbl... >>>>>>>>>> What version of .NET framework do you have installed? If you go >>>>>>>>>> to Start/Run and put in "mscorcfg.msc" without the quotes, are >>>>>>>>>> you able to access the .NET configuration tools. If you do have >>>>>>>>>> .NET installed and this doesn't work, if may be corrupt and need >>>>>>>>>> to be updated/reinstalled. >>>>>>>>>> >>>>>>>>>> If you have an early version installed, the .NET 1.1 Service Pack >>>>>>>>>> 1 is available here http://msdn.microsoft.com/netframework/ . >>>>>>>>>> Look under the Framework Downloads link. >>>>>>>>>> -- >>>>>>>>>> Chris H. >>>>>>>>>> Microsoft Windows MVP/Tablet PC >>>>>>>>>> Tablet Creations - http://nicecreations.us/ >>>>>>>>>> Associate Expert >>>>>>>>>> Expert Zone - www.microsoft.com/windowsxp/expertzone >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> "Luca" <keysteal@libero.it> wrote in message >>>>>>>>>> news:%23y$4dl6vEHA.2804@TK2MSFTNGP14.phx.gbl... >>>>>>>>>>> Hi Chris, >>>>>>>>>>> >>>>>>>>>>> Nothing to do. I re-registered that two dlls, but nothing has >>>>>>>>>>> changed. I saw details (in Advaced Text Services), and even if I >>>>>>>>>>> have installed Office 2003, I see only that three Services you >>>>>>>>>>> described in your last message and not four. I don't understand >>>>>>>>>>> what is wrong. >>>>>>>>>>> >>>>>>>>>>> "Chris H." <winxpnews********.com> ha scritto nel messaggio >>>>>>>>>>> news:<Ongvot2vEHA.1300@TK2MSFTNGP14.phx.gbl>... >>>>>>>>>>> >>>>>>>>>>>> If your Details button on the Languages tab are correct, Luca, >>>>>>>>>>>> you >>>>>>>>>>> >>>>>>>>>>>> should have Advanced Text Services which includes Tablet PC >>>>>>>>>>> >>>>>>>>>>>> Correction, Tablet PC Correction for Windows Journal and Tablet >>>>>>>>>>>> PC >>>>>>>>>>> >>>>>>>>>>>> Text Insertion. (If you have Office 2003 installed you will >>>>>>>>>>>> also have >>>>>>>>>>> >>>>>>>>>>>> a fourth entry.) >>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>>> If that is all proper, try going to the Command Prompt (not >>>>>>>>>>>> Start/Run) >>>>>>>>>>> >>>>>>>>>>>> and enter "regsvr32 inkobj.dll" without the quotation marks, >>>>>>>>>>>> then >>>>>>>>>>> >>>>>>>>>>>> Enter and then >>>>>>>>>>> >>>>>>>>>>>> "regsvr32 tpcps.dll" (without quotes) then Enter again. Restart >>>>>>>>>>>> your >>>>>>>>>>> >>>>>>>>>>>> machine after finishing each of those two modifications to the >>>>>>>>>>>> Registry. >>>>>>>>>>> >>>>>>>>>>>> -- >>>>>>>>>>> >>>>>>>>>>>> Chris H. >>>>>>>>>>> >>>>>>>>>>>> Microsoft Windows MVP/Tablet PC >>>>>>>>>>> >>>>>>>>>>>> Tablet Creations - http://nicecreations.us/ Associate Expert >>>>>>>>>>>> Expert >>>>>>>>>>> >>>>>>>>>>>> Zone - www.microsoft.com/windowsxp/expertzone >>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>>> "Luca" <keysteal@libero.it> wrote in message >>>>>>>>>>> >>>>>>>>>>>> news:ugHtVz1vEHA.2120@TK2MSFTNGP14.phx.gbl... >>>>>>>>>>> >>>>>>>>>>>> > Hi to all, >>>>>>>>>>> >>>>>>>>>>>> > >>>>>>>>>>> >>>>>>>>>>>> > after installing Service Pack 2, when I click into Input >>>>>>>>>>>> > Panel it >>>>>>>>>>> >>>>>>>>>>>> > appears a system error that says: >>>>>>>>>>> >>>>>>>>>>>> > >>>>>>>>>>> >>>>>>>>>>>> > AppName: Tabtip.exe AppVer: 1.7.200.2180 ModName: ntdll.dll >>>>>>>>>>> >>>>>>>>>>>> > ModVer: 5.1.2600.2180 Offset: 00010370 >>>>>>>>>>> >>>>>>>>>>>> > >>>>>>>>>>> >>>>>>>>>>>> > I follow some suggestions on the net, in particular to set >>>>>>>>>>>> > the >>>>>>>>>>> >>>>>>>>>>>> > proper keyboard language (italian), but nothing has changed >>>>>>>>>>>> > and >>>>>>>>>>> >>>>>>>>>>>> > already have this error. I wouldn't uninstall Service Pack 2, >>>>>>>>>>>> > some >>>>>>>>>>> >>>>>>>>>>>> > of Tablet Users have solved this problem? >>>>>>>>>>> >>>>>>>>>>>> > >>>>>>>>>>> >>>>>>>>>>>> > Thank you, >>>>>>>>>>> >>>>>>>>>>>> > >>>>>>>>>>> >>>>>>>>>>>> > - Luca - >>>>>>>>>>> >>>>>>>>>>>> > >>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>> >>>>>>>> >>>>>>> >>>>>>> >>>>>> >>>>>> >>>>> >>>>> >>>> >>>> >>> >>> >> >> > > |
|
11-02-2004, 08:15 PM
| |||
| |||
| Re: ntdll.dll tabtip.exe error after installing Sp2 Yes I did it. Probably I must tell you a thing. I installed a MSDN version of Tablet Xp overwriting a previous version of Tablet Xp (not MSDN). It could be the reason of this system error? I don't think as if I remove Service Pack 2 everything is going well. "Chris H." <winxpnews********.com> ha scritto nel messaggio news:eyJ6mcTwEHA.1988@TK2MSFTNGP12.phx.gbl... > Those are the correct files, according to my installation here. Did you > run the regsrv32 portion we talked about previously at the Command Prompt > within that directory? > > This was: At the Command Prompt (within the C:\Program Files\Common > Files\Microsoft Shared\Ink enter "regsvr32 inkobj.dll" without the > quotation marks, then Enter and then "regsvr32 tpcps.dll" (without quotes) > then Enter again. Restart your machine after finishing each of those two > modifications to the Registry. > -- > Chris H. > Microsoft Windows MVP/Tablet PC > Tablet Creations - http://nicecreations.us/ > Associate Expert > Expert Zone - www.microsoft.com/windowsxp/expertzone > > > > "Luca" <keysteal@libero.it> wrote in message > news:uLCYsBTwEHA.2012@TK2MSFTNGP15.phx.gbl... >> Well Chris, >> >> It's a clean installation of Windows Xp Tablet so it's very hard to find >> it some viruses or adware, by the way >> I did it and I find two files suspect to be adware (but it was a backup >> copy of a previous installation). I removed them. >> >> These are informations about two files: >> >> Inkobj.Dll >> >> File Version: 2.7.2600.2180 >> >> File Version: 2.7.2600.2180 (xpsp_sp2_rtm.040803-2158) >> Language: English (United States) >> >> TcpPs.Dll >> >> File Version: 1.0.2201.0 >> >> File Version: 1.0.2201.0 (xpsp1.020828-1920) >> Language: English (United States) >> >> "Chris H." <winxpnews********.com> ha scritto nel messaggio >> news:eLPiWxRwEHA.2908@tk2msftngp13.phx.gbl... >>> Okay, perhaps we should take a wild stab at a different direction. >>> You're running anti-virus software, correct, with the latest >>> definitions? If so, please use that to do a thorough check of your >>> system. >>> >>> After you've done that, if you have parasite and Trojan detecting >>> software available, please update the definitions and then run those. >>> You may also be interested in the information on parasites and Trojans >>> here: www.aumha.org/secure. >>> >>> With all that out of the way - and the main reason I'm asking you to do >>> that - I would like you to go into Windows Explorer and locate and >>> verify the inkobj.dll and tpcps.dll files are in the folder at >>> C:\Program Files\Common Files\Microsoft Shared\Ink . >>> >>> When you find those files, please right-click each of them individually >>> and select Properties. Then tap the Version tab and in the Item name: >>> pane tap File Version. Right-click the result in the right pane and >>> select "Copy." Then paste that information into your response post here >>> for each of the files. >>> -- >>> Chris H. >>> Microsoft Windows MVP/Tablet PC >>> Tablet Creations - http://nicecreations.us/ >>> Associate Expert >>> Expert Zone - www.microsoft.com/windowsxp/expertzone >>> >>> >>> "Luca" <keysteal@libero.it> wrote in message >>> news:O$rhLdRwEHA.3096@TK2MSFTNGP14.phx.gbl... >>>> Hi Chris (again), >>>> >>>> it means that it's as before, so the table input is empty when Windows >>>> Xp starts, and when I login >>>> to the system and when I try to run the table input from the icon it >>>> returns with a system error (ntdll.dll >>>> and tabtip.exe). So, nothing has changed. >>>> >>>> "Chris H." <winxpnews********.com> ha scritto nel messaggio >>>> news:uaz4koOwEHA.2540@TK2MSFTNGP09.phx.gbl... >>>>> Luca, I'm only bothered that it isn't working correctly, and trying to >>>>> help you figure out what's wrong. Not to worry. >>>>> >>>>> When you say it "doesn't work" could you give me the exact details of >>>>> what happened? Did it fail with an error message? Did it not find >>>>> the files I said to run the Registry fixes on? >>>>> >>>>> If I don't have details - (1) I followed your instructions and (2) >>>>> this is what happened - I have no way of knowing which way to try what >>>>> next. 8-) >>>>> -- >>>>> Chris H. >>>>> Microsoft Windows MVP/Tablet PC >>>>> Tablet Creations - http://nicecreations.us/ >>>>> Associate Expert >>>>> Expert Zone - www.microsoft.com/windowsxp/expertzone >>>>> >>>>> >>>>> "Luca" <keysteal@libero.it> wrote in message >>>>> news:uHz6mkLwEHA.1564@TK2MSFTNGP09.phx.gbl... >>>>>> Don't be angry Chris, but it doesn't work. >>>>>> I don't realize what Service Pack 2 Install to not permit the correct >>>>>> functioning of Tablet Input. >>>>>> >>>>>> Let me know, >>>>>> >>>>>> - Luca - >>>>>> >>>>>> "Chris H." <winxpnews********.com> ha scritto nel messaggio >>>>>> news:u%23Z0sMGwEHA.2908@tk2msftngp13.phx.gbl... >>>>>>> Luca, perhaps we should try this: Go to the Command Prompt (you can >>>>>>> get there by doing "cmd" without the quotes from Start/Run), then >>>>>>> would you enter "regsvr32 inkobj.dll" without the quotation marks, >>>>>>> then Enter and then "regsvr32 tpcps.dll" (without quotes) then Enter >>>>>>> again. Restart your machine after finishing each of those two >>>>>>> modifications to the Registry. >>>>>>> >>>>>>> If this doesn't correct the situation, then I would suggest booting >>>>>>> into Safe Mode (F8 or the appropriate Tablet button on boot-up) so >>>>>>> no drivers are loaded, and no programs are running, then do a >>>>>>> reinstall of Windows XP SP2 and the Tablet PC Edition 2005 over the >>>>>>> top of what you have. >>>>>>> >>>>>>> This will not uninstall or wipe out any of your programs, but make >>>>>>> sure you've backed up your personal files just in case. >>>>>>> -- >>>>>>> Chris H. >>>>>>> Microsoft Windows MVP/Tablet PC >>>>>>> Tablet Creations - http://nicecreations.us/ >>>>>>> Associate Expert >>>>>>> Expert Zone - www.microsoft.com/windowsxp/expertzone >>>>>>> >>>>>>> >>>>>>> >>>>>>> "Luca" <keysteal@libero.it> wrote in message >>>>>>> news:%23UAjcZFwEHA.3416@TK2MSFTNGP09.phx.gbl... >>>>>>>> Hi Chris, >>>>>>>> >>>>>>>> When I try to run mscorcfg.msc from Start/Run it simply says that >>>>>>>> it doesn't >>>>>>>> find any program with that name. So I must search it throught Hd >>>>>>>> and run it directly from >>>>>>>> its directory. >>>>>>>> >>>>>>>> I launch the Framework correctly from Administrative Tools. >>>>>>>> >>>>>>>> I make a mistake, I mean with appearing that the panel is >>>>>>>> displaying as a keyboard meanwhile now it's >>>>>>>> only a window without the keyboard. Empty. >>>>>>>> >>>>>>>> "Chris H." <winxpnews********.com> ha scritto nel messaggio >>>>>>>> news:uK2mpVDwEHA.824@TK2MSFTNGP11.phx.gbl... >>>>>>>>> We should go step-by-step on this. Are you getting any error >>>>>>>>> messages when you attempt to start mscorcfg.msc from Start/Run, or >>>>>>>>> is it just not responding? If you go to Start/Run and put in >>>>>>>>> "msc" without the quotes, then tap the OK button, does that launch >>>>>>>>> the Microsoft Management Console without error? >>>>>>>>> >>>>>>>>> If you go into Control Panel/Administrative Tools do you see the >>>>>>>>> Microsoft .NET Framework 1.1 Configuration shortcut in there? >>>>>>>>> Does it launch properly from that location? >>>>>>>>> >>>>>>>>> When you say the Tablet Input Panel "disappeared" could you >>>>>>>>> describe exactly what you're seeing? Are you saying there is no >>>>>>>>> icon in the Taskbar area from which to launch the TIP? Are you >>>>>>>>> saying it doesn't launch when you tap that icon? >>>>>>>>> -- >>>>>>>>> Chris H. >>>>>>>>> Microsoft Windows MVP/Tablet PC >>>>>>>>> Tablet Creations - http://nicecreations.us/ >>>>>>>>> Associate Expert >>>>>>>>> Expert Zone - www.microsoft.com/windowsxp/expertzone >>>>>>>>> >>>>>>>>> >>>>>>>>> "Luca" <keysteal@libero.it> wrote in message >>>>>>>>> news:O$KzHxCwEHA.3292@TK2MSFTNGP15.phx.gbl... >>>>>>>>>> Dear Chris, >>>>>>>>>> >>>>>>>>>> thank for you patience. I tried to start mscorcfg.msc from >>>>>>>>>> Start/Run but it didn't start. >>>>>>>>>> So I installed .Net 1.1 from Microsoft, and tried again to start >>>>>>>>>> .msc from Start/Run, but nothing. >>>>>>>>>> I made a search trought my HD and I found it in >>>>>>>>>> c:\windows\microsoft .net\etc. After Start it directly from the >>>>>>>>>> .Net >>>>>>>>>> folder I find the version 1.1.4322.573. >>>>>>>>>> >>>>>>>>>> By the way, after installed the Framework the problem hasn't been >>>>>>>>>> solved. I de-installed the Service Pack 2 and Tablet >>>>>>>>>> Input appears again, after re-installing Service Pack 2 it >>>>>>>>>> disappeared. >>>>>>>>>> >>>>>>>>>> Really, I don't understand where it is the problem. >>>>>>>>>> >>>>>>>>>> "Chris H." <winxpnews********.com> ha scritto nel messaggio >>>>>>>>>> news:urqDIk8vEHA.536@TK2MSFTNGP11.phx.gbl... >>>>>>>>>>> What version of .NET framework do you have installed? If you go >>>>>>>>>>> to Start/Run and put in "mscorcfg.msc" without the quotes, are >>>>>>>>>>> you able to access the .NET configuration tools. If you do have >>>>>>>>>>> .NET installed and this doesn't work, if may be corrupt and need >>>>>>>>>>> to be updated/reinstalled. >>>>>>>>>>> >>>>>>>>>>> If you have an early version installed, the .NET 1.1 Service >>>>>>>>>>> Pack 1 is available here http://msdn.microsoft.com/netframework/ >>>>>>>>>>> . Look under the Framework Downloads link. >>>>>>>>>>> -- >>>>>>>>>>> Chris H. >>>>>>>>>>> Microsoft Windows MVP/Tablet PC >>>>>>>>>>> Tablet Creations - http://nicecreations.us/ >>>>>>>>>>> Associate Expert >>>>>>>>>>> Expert Zone - www.microsoft.com/windowsxp/expertzone >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> "Luca" <keysteal@libero.it> wrote in message >>>>>>>>>>> news:%23y$4dl6vEHA.2804@TK2MSFTNGP14.phx.gbl... >>>>>>>>>>>> Hi Chris, >>>>>>>>>>>> >>>>>>>>>>>> Nothing to do. I re-registered that two dlls, but nothing has >>>>>>>>>>>> changed. I saw details (in Advaced Text Services), and even if >>>>>>>>>>>> I have installed Office 2003, I see only that three Services >>>>>>>>>>>> you described in your last message and not four. I don't >>>>>>>>>>>> understand what is wrong. >>>>>>>>>>>> >>>>>>>>>>>> "Chris H." <winxpnews********.com> ha scritto nel messaggio >>>>>>>>>>>> news:<Ongvot2vEHA.1300@TK2MSFTNGP14.phx.gbl>... >>>>>>>>>>>> >>>>>>>>>>>>> If your Details button on the Languages tab are correct, Luca, >>>>>>>>>>>>> you >>>>>>>>>>>> >>>>>>>>>>>>> should have Advanced Text Services which includes Tablet PC >>>>>>>>>>>> >>>>>>>>>>>>> Correction, Tablet PC Correction for Windows Journal and >>>>>>>>>>>>> Tablet PC >>>>>>>>>>>> >>>>>>>>>>>>> Text Insertion. (If you have Office 2003 installed you will >>>>>>>>>>>>> also have >>>>>>>>>>>> >>>>>>>>>>>>> a fourth entry.) >>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>>> If that is all proper, try going to the Command Prompt (not >>>>>>>>>>>>> Start/Run) >>>>>>>>>>>> >>>>>>>>>>>>> and enter "regsvr32 inkobj.dll" without the quotation marks, >>>>>>>>>>>>> then >>>>>>>>>>>> >>>>>>>>>>>>> Enter and then >>>>>>>>>>>> >>>>>>>>>>>>> "regsvr32 tpcps.dll" (without quotes) then Enter again. >>>>>>>>>>>>> Restart your >>>>>>>>>>>> >>>>>>>>>>>>> machine after finishing each of those two modifications to the >>>>>>>>>>>>> Registry. >>>>>>>>>>>> >>>>>>>>>>>>> -- >>>>>>>>>>>> >>>>>>>>>>>>> Chris H. >>>>>>>>>>>> >>>>>>>>>>>>> Microsoft Windows MVP/Tablet PC >>>>>>>>>>>> >>>>>>>>>>>>> Tablet Creations - http://nicecreations.us/ Associate Expert >>>>>>>>>>>>> Expert >>>>>>>>>>>> >>>>>>>>>>>>> Zone - www.microsoft.com/windowsxp/expertzone >>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>>> "Luca" <keysteal@libero.it> wrote in message >>>>>>>>>>>> >>>>>>>>>>>>> news:ugHtVz1vEHA.2120@TK2MSFTNGP14.phx.gbl... >>>>>>>>>>>> >>>>>>>>>>>>> > Hi to all, >>>>>>>>>>>> >>>>>>>>>>>>> > >>>>>>>>>>>> >>>>>>>>>>>>> > after installing Service Pack 2, when I click into Input >>>>>>>>>>>>> > Panel it >>>>>>>>>>>> >>>>>>>>>>>>> > appears a system error that says: >>>>>>>>>>>> >>>>>>>>>>>>> > >>>>>>>>>>>> >>>>>>>>>>>>> > AppName: Tabtip.exe AppVer: 1.7.200.2180 ModName: ntdll.dll >>>>>>>>>>>> >>>>>>>>>>>>> > ModVer: 5.1.2600.2180 Offset: 00010370 >>>>>>>>>>>> >>>>>>>>>>>>> > >>>>>>>>>>>> >>>>>>>>>>>>> > I follow some suggestions on the net, in particular to set >>>>>>>>>>>>> > the >>>>>>>>>>>> >>>>>>>>>>>>> > proper keyboard language (italian), but nothing has changed >>>>>>>>>>>>> > and >>>>>>>>>>>> >>>>>>>>>>>>> > already have this error. I wouldn't uninstall Service Pack >>>>>>>>>>>>> > 2, some >>>>>>>>>>>> >>>>>>>>>>>>> > of Tablet Users have solved this problem? >>>>>>>>>>>> >>>>>>>>>>>>> > >>>>>>>>>>>> >>>>>>>>>>>>> > Thank you, >>>>>>>>>>>> >>>>>>>>>>>>> > >>>>>>>>>>>> >>>>>>>>>>>>> > - Luca - >>>>>>>>>>>> >>>>>>>>>>>>> > >>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>> >>>>>>>> >>>>>>> >>>>>>> >>>>>> >>>>>> >>>>> >>>>> >>>> >>>> >>> >>> >> >> > > |
|
| Bookmarks |
| Thread Tools | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| ntdll.dll error | 19paulius91 | Windows Vista | 2 | 12-12-2008 06:20 AM |
| tabtip error | wadavis@vt.edu | Windows XP Tablet PC Newsgroup | 1 | 02-12-2008 05:40 PM |
| ntdll.dll error | crapit | Internet Explorer | 6 | 05-25-2007 09:00 AM |
| Ntdll.dll error | xpprouser101 | Windows XP | 2 | 01-04-2007 05:57 AM |
| Tabtip, Kernel32, and NTDLL.DLL errors when calibrating pen or just | NW_Tech | Windows XP Tablet PC Newsgroup | 2 | 12-03-2006 11:40 AM |
| New To Technology Questions? | Do You Need Help with Your Computer or Device? | Do You Need Help with this site? |
