I bought 1 Card bus with 2 port usb 2.0
This card is generic and i think the chipset come from NEC.
The FCC nuber is not present...

My hardware:
Tablet PC ACER TravelMate c100 with
XP french Tablet pc and SP2

When I insert the card the system requires the file
"usbohci.sys"

My source:
\I386\sp2.cab\usbohci.sys

The installation finishe correctly.

When i plug my USB 2.0 Flash Drive or other device the
problem is the same.

The system mount the volum E: OK.
When i go in the volum with graphic interface it's possible
for 5 second and next the system is busy.

In the same hardware with SP1 it's OK...

One idea?

Thank you!

Better greetings.

I'd check Acer's web site for your locale and see if they have any updated
drivers - especially BIOS - to install. There seems to be issues with XP
SP2 installing and most companies are furnishing newer drivers.
--
Chris H.
Microsoft Windows MVP/Tablet PC
Tablet Creations - http://nicecreations.us/
Associate Expert
Expert Zone - www.microsoft.com/windowsxp/expertzone


<testab********.com> wrote in message
news:14d701c4abb8$90285130$a601280a@phx.gbl...
>I bought 1 Card bus with 2 port usb 2.0
> This card is generic and i think the chipset come from NEC.
> The FCC nuber is not present...
>
> My hardware:
> Tablet PC ACER TravelMate c100 with
> XP french Tablet pc and SP2
>
> When I insert the card the system requires the file
> "usbohci.sys"
>
> My source:
> \I386\sp2.cab\usbohci.sys
>
> The installation finishe correctly.
>
> When i plug my USB 2.0 Flash Drive or other device the
> problem is the same.
>
> The system mount the volum E: OK.
> When i go in the volum with graphic interface it's possible
> for 5 second and next the system is busy.
>
> In the same hardware with SP1 it's OK...
>
> One idea?
>
> Thank you!
>
> Better greetings.

Yesterday I updated the BIOS but that did not
solve the case.

>-----Original Message-----
>I'd check Acer's web site for your locale and see if
they have any updated
>drivers - especially BIOS - to install. There seems to
be issues with XP
>SP2 installing and most companies are furnishing newer
drivers.
>--
>Chris H.
>Microsoft Windows MVP/Tablet PC
>Tablet Creations - http://nicecreations.us/
>Associate Expert
>Expert Zone - www.microsoft.com/windowsxp/expertzone
>
>
><testab********.com> wrote in message
>news:14d701c4abb8$90285130$a601280a@phx.gbl...
>>I bought 1 Card bus with 2 port usb 2.0
>> This card is generic and i think the chipset come from
NEC.
>> The FCC nuber is not present...
>>
>> My hardware:
>> Tablet PC ACER TravelMate c100 with
>> XP french Tablet pc and SP2
>>
>> When I insert the card the system requires the file
>> "usbohci.sys"
>>
>> My source:
>> \I386\sp2.cab\usbohci.sys
>>
>> The installation finishe correctly.
>>
>> When i plug my USB 2.0 Flash Drive or other device the
>> problem is the same.
>>
>> The system mount the volum E: OK.
>> When i go in the volum with graphic interface it's
possible
>> for 5 second and next the system is busy.
>>
>> In the same hardware with SP1 it's OK...
>>
>> One idea?
>>
>> Thank you!
>>
>> Better greetings.
>
>
>.
>

In Device Manager, have you updated those drivers? I would check the Acer
site and make sure you've got the most current drivers installed. You may
need to reinstall the USB controllers, the composite device if your system
has that, and the Root Hub.
--
Chris H.
Microsoft Windows MVP/Tablet PC
Tablet Creations - http://nicecreations.us/
Associate Expert
Expert Zone - www.microsoft.com/windowsxp/expertzone


<testab********.com> wrote in message
news:00d301c4abbd$beffa490$a301280a@phx.gbl...
> Yesterday I updated the BIOS but that did not
> solve the case.
>
>>-----Original Message-----
>>I'd check Acer's web site for your locale and see if
> they have any updated
>>drivers - especially BIOS - to install. There seems to
> be issues with XP
>>SP2 installing and most companies are furnishing newer
> drivers.
>>--
>>Chris H.
>>Microsoft Windows MVP/Tablet PC
>>Tablet Creations - http://nicecreations.us/
>>Associate Expert
>>Expert Zone - www.microsoft.com/windowsxp/expertzone
>>
>>
>><testab********.com> wrote in message
>>news:14d701c4abb8$90285130$a601280a@phx.gbl...
>>>I bought 1 Card bus with 2 port usb 2.0
>>> This card is generic and i think the chipset come from
> NEC.
>>> The FCC nuber is not present...
>>>
>>> My hardware:
>>> Tablet PC ACER TravelMate c100 with
>>> XP french Tablet pc and SP2
>>>
>>> When I insert the card the system requires the file
>>> "usbohci.sys"
>>>
>>> My source:
>>> \I386\sp2.cab\usbohci.sys
>>>
>>> The installation finishe correctly.
>>>
>>> When i plug my USB 2.0 Flash Drive or other device the
>>> problem is the same.
>>>
>>> The system mount the volum E: OK.
>>> When i go in the volum with graphic interface it's
> possible
>>> for 5 second and next the system is busy.
>>>
>>> In the same hardware with SP1 it's OK...
>>>
>>> One idea?
>>>
>>> Thank you!
>>>
>>> Better greetings.
>>
>>
>>.
>>