Go Back   Technology Questions > Software Questions > Operating System Questions > Vista Community > Windows Vista

Windows Vista Discuss the different versions of Windows Vista, Fuji, or Vienna

Reply
 
LinkBack Thread Tools
  #1 (permalink)  
Old 01-02-2007, 07:07 AM
Tom
Tablet PC Guest
 
Posts: n/a
Fatal System Error when installing Vista with MSI K9NGM motherboar

I'm attempting to install Wndows Vista RC1 on a system with the following
hardware:

Motherboard - MSI K9NGM (NVIDIA MCP51G chipset)
Bios - AMI 3.10 (latest version)
CPU - AMD Athlon 64 X2 4200+
Memory - 2 x 1 Gig Corsair DDR2
Video Card - NVIDIA GeForce 7300 GT
Hard Drive - Maxtor 7V250F0 SATA
DVD Drive - Samsung SH-S182DB

However, once the installation process gets as far as (c) Microsoft with the
moving green bar the PC blue screens with the following message:

STOP: c000021a {Fatal System Error}
The initial session process or system process terminated unexpectedly with a
status of 0x00000000 (0xc0000001 0x001003b4).
The system has been shut down.

So far I've tried:
* Clean install with 32-bit Vista
* Clean install with 64-bit Vista
* Upgrade from 32-bit XP to 32-bit Vista
* Disabling all motherboard peripherals except for primary IDE channel (DVD
drive is on this)
* Configuring memory as Dual-channel, configuring memory as Single-channel,
removing 2nd DIMM

Does anyone have any other suggestions?

Has anyone managed to install Vista on an MSI K9NGM mother board or on a
motherboard with an NVIDIA MCP51G chipset?

Thanks,

Tom.
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote

 
Old 01-02-2007, 07:07 AM
Xploder HD Movie Player for PS3. Manage, convert and transfer media files between the PC and PS3.
  #2 (permalink)  
Old 01-02-2007, 07:07 AM
Jdr
Tablet PC Guest
 
Posts: n/a
Re: Fatal System Error when installing Vista with MSI K9NGM motherboar

What OS were you running with this configuration before you've
tried to install Vista?

In this case it might be BIOS, as sometimes the latest is not the best...-;)


"Tom" <Tom@discussions.microsoft.com> wrote in message
news:C3768FAB-EC0B-4136-B402-E7BFF26E857D@microsoft.com...
> I'm attempting to install Wndows Vista RC1 on a system with the following
> hardware:
>
> Motherboard - MSI K9NGM (NVIDIA MCP51G chipset)
> Bios - AMI 3.10 (latest version)
> CPU - AMD Athlon 64 X2 4200+
> Memory - 2 x 1 Gig Corsair DDR2
> Video Card - NVIDIA GeForce 7300 GT
> Hard Drive - Maxtor 7V250F0 SATA
> DVD Drive - Samsung SH-S182DB
>
> However, once the installation process gets as far as (c) Microsoft with
> the
> moving green bar the PC blue screens with the following message:
>
> STOP: c000021a {Fatal System Error}
> The initial session process or system process terminated unexpectedly with
> a
> status of 0x00000000 (0xc0000001 0x001003b4).
> The system has been shut down.
>
> So far I've tried:
> * Clean install with 32-bit Vista
> * Clean install with 64-bit Vista
> * Upgrade from 32-bit XP to 32-bit Vista
> * Disabling all motherboard peripherals except for primary IDE channel
> (DVD
> drive is on this)
> * Configuring memory as Dual-channel, configuring memory as
> Single-channel,
> removing 2nd DIMM
>
> Does anyone have any other suggestions?
>
> Has anyone managed to install Vista on an MSI K9NGM mother board or on a
> motherboard with an NVIDIA MCP51G chipset?
>
> Thanks,
>
> Tom.


Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote

  #3 (permalink)  
Old 01-02-2007, 07:15 AM
DarkDALO
Tablet PC Guest
 
Posts: n/a
RE: Fatal System Error when installing Vista with MSI K9NGM motherboar



"Tom" wrote:

> I'm attempting to install Wndows Vista RC1 on a system with the following
> hardware:
>
> Motherboard - MSI K9NGM (NVIDIA MCP51G chipset)
> Bios - AMI 3.10 (latest version)
> CPU - AMD Athlon 64 X2 4200+
> Memory - 2 x 1 Gig Corsair DDR2
> Video Card - NVIDIA GeForce 7300 GT
> Hard Drive - Maxtor 7V250F0 SATA
> DVD Drive - Samsung SH-S182DB
>
> However, once the installation process gets as far as (c) Microsoft with the
> moving green bar the PC blue screens with the following message:
>
> STOP: c000021a {Fatal System Error}
> The initial session process or system process terminated unexpectedly with a
> status of 0x00000000 (0xc0000001 0x001003b4).
> The system has been shut down.
>
> So far I've tried:
> * Clean install with 32-bit Vista
> * Clean install with 64-bit Vista
> * Upgrade from 32-bit XP to 32-bit Vista
> * Disabling all motherboard peripherals except for primary IDE channel (DVD
> drive is on this)
> * Configuring memory as Dual-channel, configuring memory as Single-channel,
> removing 2nd DIMM
>
> Does anyone have any other suggestions?
>
> Has anyone managed to install Vista on an MSI K9NGM mother board or on a
> motherboard with an NVIDIA MCP51G chipset?
>
> Thanks,
>
> Tom.

Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote

  #4 (permalink)  
Old 01-02-2007, 07:15 AM
DarkDALO
Tablet PC Guest
 
Posts: n/a
RE: Fatal System Error when installing Vista with MSI K9NGM motherboar


I have the same trouble with a similar configuration, same motherboard. So
it's a motherboard incompatibility issue.

"Tom" wrote:

> I'm attempting to install Wndows Vista RC1 on a system with the following
> hardware:
>
> Motherboard - MSI K9NGM (NVIDIA MCP51G chipset)
> Bios - AMI 3.10 (latest version)
> CPU - AMD Athlon 64 X2 4200+
> Memory - 2 x 1 Gig Corsair DDR2
> Video Card - NVIDIA GeForce 7300 GT
> Hard Drive - Maxtor 7V250F0 SATA
> DVD Drive - Samsung SH-S182DB
>
> However, once the installation process gets as far as (c) Microsoft with the
> moving green bar the PC blue screens with the following message:
>
> STOP: c000021a {Fatal System Error}
> The initial session process or system process terminated unexpectedly with a
> status of 0x00000000 (0xc0000001 0x001003b4).
> The system has been shut down.
>
> So far I've tried:
> * Clean install with 32-bit Vista
> * Clean install with 64-bit Vista
> * Upgrade from 32-bit XP to 32-bit Vista
> * Disabling all motherboard peripherals except for primary IDE channel (DVD
> drive is on this)
> * Configuring memory as Dual-channel, configuring memory as Single-channel,
> removing 2nd DIMM
>
> Does anyone have any other suggestions?
>
> Has anyone managed to install Vista on an MSI K9NGM mother board or on a
> motherboard with an NVIDIA MCP51G chipset?
>
> Thanks,
>
> Tom.

Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote

  #5 (permalink)  
Old 01-02-2007, 07:16 AM
Tom
Tablet PC Guest
 
Posts: n/a
RE: Fatal System Error when installing Vista with MSI K9NGM mother

I contacted MSI to ask if the motherboard was compatible with Vista, they say:

Dear Sir,

Regarding to your concern, this board could support Windows Vista but due
this OS not release yet so we can't supply such drivers.

Regards,
MSI Technical Support Team



"DarkDALO" wrote:

>
> I have the same trouble with a similar configuration, same motherboard. So
> it's a motherboard incompatibility issue.
>


Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote

  #6 (permalink)  
Old 03-16-2007, 01:30 AM
Nomix
Tablet PC Guest
 
Posts: n/a
Re: Fatal System Error when installing Vista with MSI K9NGM motherboar


This might be a bit late for you guy's but this is the link 2 the newest
bios release A7252nms.330, It worked a treat 4 me .................

ftp://ftp.msi.com.tw/BIOS/7252/


--
Nomix
------------------------------------------------------------------------
Nomix's Profile: http://forums.techarena.in/member.php?userid=23460
View this thread: http://forums.techarena.in/showthread.php?t=616616

http://forums.techarena.in

Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote

  #7 (permalink)  
Old 01-03-2008, 03:30 PM
facu
Tablet PC Guest
 
Posts: n/a
Re: Fatal System Error when installing Vista with MSI K9NGM motherboar


Try to use LiveUpdate for update the BIOS version, or try this link:
http://download1.msi.com.tw/files/do...xe/7252v34.zip


--
facu
------------------------------------------------------------------------
facu's Profile: http://forums.techarena.in/member.php?userid=38827
View this thread: http://forums.techarena.in/showthread.php?t=616616

http://forums.techarena.in

Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote

  #8 (permalink)  
Old 01-03-2008, 09:20 PM
Robyn
Tablet PC Guest
 
Posts: n/a
Re: Fatal System Error when installing Vista with MSI K9NGM mother

I have a msi motherboard, mine supports vista (all versions), I'm sorry I
seen the model # within those forums you have links too, and seen what the
model # of the motherboard. That motherboard, not does support vista! My
advice replace with a newer motherboard perhaps. Hope it all works out!
--
Robyn


"facu" wrote:

>
> Try to use LiveUpdate for update the BIOS version, or try this link:
> http://download1.msi.com.tw/files/do...xe/7252v34.zip
>
>
> --
> facu
> ------------------------------------------------------------------------
> facu's Profile: http://forums.techarena.in/member.php?userid=38827
> View this thread: http://forums.techarena.in/showthread.php?t=616616
>
> http://forums.techarena.in
>
>

Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote

  #9 (permalink)  
Old 01-05-2008, 10:04 PM
facu
Tablet PC Guest
 
Posts: n/a
Re: Fatal System Error when installing Vista with MSI K9NGM motherboar


Watch the README included in the link.
How are they going to fix an error in Vista, if not does support
vista?
(My BIOS Release is V3.3)


This is the text included:


-K9NGM (MS-7252) V3.4 BIOS Release
-------------------------------------------------
No need to release the BIOS to web site.
Only release the BIOS for LiveUpdate only because of MAC address will
be erase.
-------------------------------------------------
1. This is AMI BIOS release
2. This BIOS fixes the following problem of the previous version:
- Update CPU ID.
- Fixed PS2 mouse cannot work after resume from S3 under Vista.
- Fixed system cannot use 1G * 2 pcs memory.
3. 2007/05/18-


--
facu
------------------------------------------------------------------------
facu's Profile: http://forums.techarena.in/member.php?userid=38827
View this thread: http://forums.techarena.in/showthread.php?t=616616

http://forums.techarena.in

Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote

Reply

Bookmarks

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Error that have the cooling system of tabletpc r25-s3503 and power supply (increase of temperature) Elmer Windows XP Tablet PC Newsgroup 1 12-03-2006 11:41 AM
Error that have the cooling system of laptop r25-s3503 and power supply (increase of temperature) Elmer Windows XP Tablet PC Newsgroup 4 12-03-2006 11:41 AM
ntdll.dll tabtip.exe error after installing Sp2 Luca Windows XP Tablet PC Newsgroup 16 11-14-2004 07:15 PM
Fatal Error: Exception code=C0000005 BeeFarmer Windows XP Tablet PC Newsgroup 7 05-26-2004 09:17 PM
Crossword Power Toy Gets Fatal Exception Steve Winograd [MVP] Windows XP Tablet PC Newsgroup 4 05-26-2004 09:16 PM


All times are GMT -8. The time now is 08:35 PM.


2003 - 2008 All Rights Reserved. Technology Questions

SEO by vBSEO 3.1.0