I just got Vista RC1 and nothing related to connection the internet seems to
be working including IE, Windows Update, Gagets dealing with the web, and AIM.

Whenver I diagnos the problem I get the error

"www.XXXXX.com is not set up to establish a connection on port "World Wide
Web service (HTTP) with this computer"

Obviously I've checked to see if i have a good connection and I do.

I don't know what else to do.

Hi Matt,

You have a Marvell Yukon network adapter? There is a known bug with this nic
and RC1. I found the easiest solution to be to just install XP drivers for
it over the Vista ones. It has been fixed in later builds.

--
Best of Luck,

Rick Rogers, aka "Nutcase" - Microsoft MVP
http://mvp.support.microsoft.com/
Windows help - www.rickrogers.org

"Matt" <Matt@discussions.microsoft.com> wrote in message
news:0FE9423F-BAB8-46EC-A816-DD9CCE7E005E@microsoft.com...
>I just got Vista RC1 and nothing related to connection the internet seems
>to
> be working including IE, Windows Update, Gagets dealing with the web, and
> AIM.
>
> Whenver I diagnos the problem I get the error
>
> "www.XXXXX.com is not set up to establish a connection on port "World Wide
> Web service (HTTP) with this computer"
>
> Obviously I've checked to see if i have a good connection and I do.
>
> I don't know what else to do.
>
>

I keep reading about the problems with the Marvell Yukon, which is the nic I
have. Haven't had any problems at all in any build with it!! x86 and x64.
Vista must like me ;-)

--
Jane, not plain ;) 64 bit enabled :)
Batteries not included. Braincell on vacation :-)
"Rick Rogers" <rick@mvps.org> wrote in message
news:uzymy4J8GHA.4408@TK2MSFTNGP02.phx.gbl...
> Hi Matt,
>
> You have a Marvell Yukon network adapter? There is a known bug with this
> nic and RC1. I found the easiest solution to be to just install XP drivers
> for it over the Vista ones. It has been fixed in later builds.
>
> --
> Best of Luck,
>
> Rick Rogers, aka "Nutcase" - Microsoft MVP
> http://mvp.support.microsoft.com/
> Windows help - www.rickrogers.org
>
> "Matt" <Matt@discussions.microsoft.com> wrote in message
> news:0FE9423F-BAB8-46EC-A816-DD9CCE7E005E@microsoft.com...
>>I just got Vista RC1 and nothing related to connection the internet seems
>>to
>> be working including IE, Windows Update, Gagets dealing with the web, and
>> AIM.
>>
>> Whenver I diagnos the problem I get the error
>>
>> "www.XXXXX.com is not set up to establish a connection on port "World
>> Wide
>> Web service (HTTP) with this computer"
>>
>> Obviously I've checked to see if i have a good connection and I do.
>>
>> I don't know what else to do.
>>
>>
>

It's probably just certain chipsets. It won't matter anyways as it's been
addressed.

--
Best of Luck,

Rick Rogers, aka "Nutcase" - Microsoft MVP
http://mvp.support.microsoft.com/
Windows help - www.rickrogers.org

"Jane C" <jellybean@nospam.xjgarage.org> wrote in message
news:8C97D47B-4D9B-41CD-A575-741CBA4F4684@microsoft.com...
>I keep reading about the problems with the Marvell Yukon, which is the nic
>I have. Haven't had any problems at all in any build with it!! x86 and
>x64. Vista must like me ;-)
>
> --
> Jane, not plain ;) 64 bit enabled :)
> Batteries not included. Braincell on vacation :-)
> "Rick Rogers" <rick@mvps.org> wrote in message
> news:uzymy4J8GHA.4408@TK2MSFTNGP02.phx.gbl...
>> Hi Matt,
>>
>> You have a Marvell Yukon network adapter? There is a known bug with this
>> nic and RC1. I found the easiest solution to be to just install XP
>> drivers for it over the Vista ones. It has been fixed in later builds.
>>
>> --
>> Best of Luck,
>>
>> Rick Rogers, aka "Nutcase" - Microsoft MVP
>> http://mvp.support.microsoft.com/
>> Windows help - www.rickrogers.org
>>
>> "Matt" <Matt@discussions.microsoft.com> wrote in message
>> news:0FE9423F-BAB8-46EC-A816-DD9CCE7E005E@microsoft.com...
>>>I just got Vista RC1 and nothing related to connection the internet seems
>>>to
>>> be working including IE, Windows Update, Gagets dealing with the web,
>>> and AIM.
>>>
>>> Whenver I diagnos the problem I get the error
>>>
>>> "www.XXXXX.com is not set up to establish a connection on port "World
>>> Wide
>>> Web service (HTTP) with this computer"
>>>
>>> Obviously I've checked to see if i have a good connection and I do.
>>>
>>> I don't know what else to do.
>>>
>>>
>>
>

No problem here either but doubt the nic likes me. Good thing too, since my
nVidia nic has the firewall problem and I can't find a way to install it so
I can uninstall it, so Marvell or nothing for me so far. Have you seen any
solution for RC1?

"Jane C" <jellybean@nospam.xjgarage.org> wrote in message
news:8C97D47B-4D9B-41CD-A575-741CBA4F4684@microsoft.com...
>I keep reading about the problems with the Marvell Yukon, which is the nic
>I have. Haven't had any problems at all in any build with it!! x86 and
>x64. Vista must like me ;-)
>
> --
> Jane, not plain ;) 64 bit enabled :)
> Batteries not included. Braincell on vacation :-)
> "Rick Rogers" <rick@mvps.org> wrote in message
> news:uzymy4J8GHA.4408@TK2MSFTNGP02.phx.gbl...
>> Hi Matt,
>>
>> You have a Marvell Yukon network adapter? There is a known bug with this
>> nic and RC1. I found the easiest solution to be to just install XP
>> drivers for it over the Vista ones. It has been fixed in later builds.
>>
>> --
>> Best of Luck,
>>
>> Rick Rogers, aka "Nutcase" - Microsoft MVP
>> http://mvp.support.microsoft.com/
>> Windows help - www.rickrogers.org
>>
>> "Matt" <Matt@discussions.microsoft.com> wrote in message
>> news:0FE9423F-BAB8-46EC-A816-DD9CCE7E005E@microsoft.com...
>>>I just got Vista RC1 and nothing related to connection the internet seems
>>>to
>>> be working including IE, Windows Update, Gagets dealing with the web,
>>> and AIM.
>>>
>>> Whenver I diagnos the problem I get the error
>>>
>>> "www.XXXXX.com is not set up to establish a connection on port "World
>>> Wide
>>> Web service (HTTP) with this computer"
>>>
>>> Obviously I've checked to see if i have a good connection and I do.
>>>
>>> I don't know what else to do.
>>>
>>>
>>
>

John:
I have the A8N-E NF4 motherboard with only Nvidia NIC and I haven't
had any problems with the Vista installed drivers though build 5744 with x64
or x86. I haven't installed any Nvidia drivers other than the ones on the
Vista disk.


"John Barnes" <jbarnes@email.net> wrote in message
news:u1C5y3W8GHA.4708@TK2MSFTNGP05.phx.gbl...
> No problem here either but doubt the nic likes me. Good thing too, since
> my nVidia nic has the firewall problem and I can't find a way to install
> it so I can uninstall it, so Marvell or nothing for me so far. Have you
> seen any solution for RC1?
>
> "Jane C" <jellybean@nospam.xjgarage.org> wrote in message
> news:8C97D47B-4D9B-41CD-A575-741CBA4F4684@microsoft.com...
>>I keep reading about the problems with the Marvell Yukon, which is the nic
>>I have. Haven't had any problems at all in any build with it!! x86 and
>>x64. Vista must like me ;-)
>>
>> --
>> Jane, not plain ;) 64 bit enabled :)
>> Batteries not included. Braincell on vacation :-)
>> "Rick Rogers" <rick@mvps.org> wrote in message
>> news:uzymy4J8GHA.4408@TK2MSFTNGP02.phx.gbl...
>>> Hi Matt,
>>>
>>> You have a Marvell Yukon network adapter? There is a known bug with this
>>> nic and RC1. I found the easiest solution to be to just install XP
>>> drivers for it over the Vista ones. It has been fixed in later builds.
>>>
>>> --
>>> Best of Luck,
>>>
>>> Rick Rogers, aka "Nutcase" - Microsoft MVP
>>> http://mvp.support.microsoft.com/
>>> Windows help - www.rickrogers.org
>>>
>>> "Matt" <Matt@discussions.microsoft.com> wrote in message
>>> news:0FE9423F-BAB8-46EC-A816-DD9CCE7E005E@microsoft.com...
>>>>I just got Vista RC1 and nothing related to connection the internet
>>>>seems to
>>>> be working including IE, Windows Update, Gagets dealing with the web,
>>>> and AIM.
>>>>
>>>> Whenver I diagnos the problem I get the error
>>>>
>>>> "www.XXXXX.com is not set up to establish a connection on port "World
>>>> Wide
>>>> Web service (HTTP) with this computer"
>>>>
>>>> Obviously I've checked to see if i have a good connection and I do.
>>>>
>>>> I don't know what else to do.
>>>>
>>>>
>>>
>>
>
>

I didn't have problems on x64 or x86, but many did. Not sure why it
randomly happens, but it does. You have certainly seen the postings on the
X64 site.


"Dennis Pack" <dennispack at hotmail dot com> wrote in message
news:9EAA005D-4405-434E-8A89-49F96791942F@microsoft.com...
> John:
> I have the A8N-E NF4 motherboard with only Nvidia NIC and I haven't
> had any problems with the Vista installed drivers though build 5744 with
> x64 or x86. I haven't installed any Nvidia drivers other than the ones on
> the Vista disk.
>
>
> "John Barnes" <jbarnes@email.net> wrote in message
> news:u1C5y3W8GHA.4708@TK2MSFTNGP05.phx.gbl...
>> No problem here either but doubt the nic likes me. Good thing too, since
>> my nVidia nic has the firewall problem and I can't find a way to install
>> it so I can uninstall it, so Marvell or nothing for me so far. Have you
>> seen any solution for RC1?
>>
>> "Jane C" <jellybean@nospam.xjgarage.org> wrote in message
>> news:8C97D47B-4D9B-41CD-A575-741CBA4F4684@microsoft.com...
>>>I keep reading about the problems with the Marvell Yukon, which is the
>>>nic I have. Haven't had any problems at all in any build with it!! x86
>>>and x64. Vista must like me ;-)
>>>
>>> --
>>> Jane, not plain ;) 64 bit enabled :)
>>> Batteries not included. Braincell on vacation :-)
>>> "Rick Rogers" <rick@mvps.org> wrote in message
>>> news:uzymy4J8GHA.4408@TK2MSFTNGP02.phx.gbl...
>>>> Hi Matt,
>>>>
>>>> You have a Marvell Yukon network adapter? There is a known bug with
>>>> this nic and RC1. I found the easiest solution to be to just install XP
>>>> drivers for it over the Vista ones. It has been fixed in later builds.
>>>>
>>>> --
>>>> Best of Luck,
>>>>
>>>> Rick Rogers, aka "Nutcase" - Microsoft MVP
>>>> http://mvp.support.microsoft.com/
>>>> Windows help - www.rickrogers.org
>>>>
>>>> "Matt" <Matt@discussions.microsoft.com> wrote in message
>>>> news:0FE9423F-BAB8-46EC-A816-DD9CCE7E005E@microsoft.com...
>>>>>I just got Vista RC1 and nothing related to connection the internet
>>>>>seems to
>>>>> be working including IE, Windows Update, Gagets dealing with the web,
>>>>> and AIM.
>>>>>
>>>>> Whenver I diagnos the problem I get the error
>>>>>
>>>>> "www.XXXXX.com is not set up to establish a connection on port "World
>>>>> Wide
>>>>> Web service (HTTP) with this computer"
>>>>>
>>>>> Obviously I've checked to see if i have a good connection and I do.
>>>>>
>>>>> I don't know what else to do.
>>>>>
>>>>>
>>>>
>>>
>>
>>
>

Doing a find on the nVidia firewall on x64 I see you even posted 1 of them

"John Barnes" <jbarnes@email.net> wrote in message
news:OBt2EQX8GHA.4620@TK2MSFTNGP02.phx.gbl...
>I didn't have problems on x64 or x86, but many did. Not sure why it
>randomly happens, but it does. You have certainly seen the postings on the
>X64 site.
>
>
> "Dennis Pack" <dennispack at hotmail dot com> wrote in message
> news:9EAA005D-4405-434E-8A89-49F96791942F@microsoft.com...
>> John:
>> I have the A8N-E NF4 motherboard with only Nvidia NIC and I
>> haven't had any problems with the Vista installed drivers though build
>> 5744 with x64 or x86. I haven't installed any Nvidia drivers other than
>> the ones on the Vista disk.
>>
>>
>> "John Barnes" <jbarnes@email.net> wrote in message
>> news:u1C5y3W8GHA.4708@TK2MSFTNGP05.phx.gbl...
>>> No problem here either but doubt the nic likes me. Good thing too,
>>> since my nVidia nic has the firewall problem and I can't find a way to
>>> install it so I can uninstall it, so Marvell or nothing for me so far.
>>> Have you seen any solution for RC1?
>>>
>>> "Jane C" <jellybean@nospam.xjgarage.org> wrote in message
>>> news:8C97D47B-4D9B-41CD-A575-741CBA4F4684@microsoft.com...
>>>>I keep reading about the problems with the Marvell Yukon, which is the
>>>>nic I have. Haven't had any problems at all in any build with it!! x86
>>>>and x64. Vista must like me ;-)
>>>>
>>>> --
>>>> Jane, not plain ;) 64 bit enabled :)
>>>> Batteries not included. Braincell on vacation :-)
>>>> "Rick Rogers" <rick@mvps.org> wrote in message
>>>> news:uzymy4J8GHA.4408@TK2MSFTNGP02.phx.gbl...
>>>>> Hi Matt,
>>>>>
>>>>> You have a Marvell Yukon network adapter? There is a known bug with
>>>>> this nic and RC1. I found the easiest solution to be to just install
>>>>> XP drivers for it over the Vista ones. It has been fixed in later
>>>>> builds.
>>>>>
>>>>> --
>>>>> Best of Luck,
>>>>>
>>>>> Rick Rogers, aka "Nutcase" - Microsoft MVP
>>>>> http://mvp.support.microsoft.com/
>>>>> Windows help - www.rickrogers.org
>>>>>
>>>>> "Matt" <Matt@discussions.microsoft.com> wrote in message
>>>>> news:0FE9423F-BAB8-46EC-A816-DD9CCE7E005E@microsoft.com...
>>>>>>I just got Vista RC1 and nothing related to connection the internet
>>>>>>seems to
>>>>>> be working including IE, Windows Update, Gagets dealing with the web,
>>>>>> and AIM.
>>>>>>
>>>>>> Whenver I diagnos the problem I get the error
>>>>>>
>>>>>> "www.XXXXX.com is not set up to establish a connection on port "World
>>>>>> Wide
>>>>>> Web service (HTTP) with this computer"
>>>>>>
>>>>>> Obviously I've checked to see if i have a good connection and I do.
>>>>>>
>>>>>> I don't know what else to do.
>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>>
>>
>
>

John:
I agree fully about the Nvidia firewall causing problems with x64.
I'm running Vista RC2 (5744) x64, (NF4 chipset) in device manager it shows
the Nvidia networking controller but the driver is from Microsoft
(6.2.0.116) not Nvidia. On my NF3 tower with Vista RC1 (5600) it also shows
the Nvidia networking controller with Microsoft drivers (6.2.0.121) not
Nvidia. Maybe I haven't had a problem since I didn't install the Nvidia
drivers.


"John Barnes" <jbarnes@email.net> wrote in message
news:OmpE$TX8GHA.3916@TK2MSFTNGP04.phx.gbl...
> Doing a find on the nVidia firewall on x64 I see you even posted 1 of them
>
> "John Barnes" <jbarnes@email.net> wrote in message
> news:OBt2EQX8GHA.4620@TK2MSFTNGP02.phx.gbl...
>>I didn't have problems on x64 or x86, but many did. Not sure why it
>>randomly happens, but it does. You have certainly seen the postings on
>>the X64 site.
>>
>>
>> "Dennis Pack" <dennispack at hotmail dot com> wrote in message
>> news:9EAA005D-4405-434E-8A89-49F96791942F@microsoft.com...
>>> John:
>>> I have the A8N-E NF4 motherboard with only Nvidia NIC and I
>>> haven't had any problems with the Vista installed drivers though build
>>> 5744 with x64 or x86. I haven't installed any Nvidia drivers other than
>>> the ones on the Vista disk.
>>>
>>>
>>> "John Barnes" <jbarnes@email.net> wrote in message
>>> news:u1C5y3W8GHA.4708@TK2MSFTNGP05.phx.gbl...
>>>> No problem here either but doubt the nic likes me. Good thing too,
>>>> since my nVidia nic has the firewall problem and I can't find a way to
>>>> install it so I can uninstall it, so Marvell or nothing for me so far.
>>>> Have you seen any solution for RC1?
>>>>
>>>> "Jane C" <jellybean@nospam.xjgarage.org> wrote in message
>>>> news:8C97D47B-4D9B-41CD-A575-741CBA4F4684@microsoft.com...
>>>>>I keep reading about the problems with the Marvell Yukon, which is the
>>>>>nic I have. Haven't had any problems at all in any build with it!!
>>>>>x86 and x64. Vista must like me ;-)
>>>>>
>>>>> --
>>>>> Jane, not plain ;) 64 bit enabled :)
>>>>> Batteries not included. Braincell on vacation :-)
>>>>> "Rick Rogers" <rick@mvps.org> wrote in message
>>>>> news:uzymy4J8GHA.4408@TK2MSFTNGP02.phx.gbl...
>>>>>> Hi Matt,
>>>>>>
>>>>>> You have a Marvell Yukon network adapter? There is a known bug with
>>>>>> this nic and RC1. I found the easiest solution to be to just install
>>>>>> XP drivers for it over the Vista ones. It has been fixed in later
>>>>>> builds.
>>>>>>
>>>>>> --
>>>>>> Best of Luck,
>>>>>>
>>>>>> Rick Rogers, aka "Nutcase" - Microsoft MVP
>>>>>> http://mvp.support.microsoft.com/
>>>>>> Windows help - www.rickrogers.org
>>>>>>
>>>>>> "Matt" <Matt@discussions.microsoft.com> wrote in message
>>>>>> news:0FE9423F-BAB8-46EC-A816-DD9CCE7E005E@microsoft.com...
>>>>>>>I just got Vista RC1 and nothing related to connection the internet
>>>>>>>seems to
>>>>>>> be working including IE, Windows Update, Gagets dealing with the
>>>>>>> web, and AIM.
>>>>>>>
>>>>>>> Whenver I diagnos the problem I get the error
>>>>>>>
>>>>>>> "www.XXXXX.com is not set up to establish a connection on port
>>>>>>> "World Wide
>>>>>>> Web service (HTTP) with this computer"
>>>>>>>
>>>>>>> Obviously I've checked to see if i have a good connection and I do.
>>>>>>>
>>>>>>> I don't know what else to do.
>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>>
>>>>
>>>
>>
>>
>
>

I haven't seen a Vista driver package from nVidia for the chipset (only the
videocard) and the driver package has the install for the firewall so I can
remove the piece that is blocking my IE32. At least for now I can use the
Marvell

"Dennis Pack" <dennispack at hotmail dot com> wrote in message
news:548DA555-6256-4413-A30D-F8EF704A7071@microsoft.com...
> John:
> I agree fully about the Nvidia firewall causing problems with x64.
> I'm running Vista RC2 (5744) x64, (NF4 chipset) in device manager it shows
> the Nvidia networking controller but the driver is from Microsoft
> (6.2.0.116) not Nvidia. On my NF3 tower with Vista RC1 (5600) it also
> shows the Nvidia networking controller with Microsoft drivers (6.2.0.121)
> not Nvidia. Maybe I haven't had a problem since I didn't install the
> Nvidia drivers.
>
>
> "John Barnes" <jbarnes@email.net> wrote in message
> news:OmpE$TX8GHA.3916@TK2MSFTNGP04.phx.gbl...
>> Doing a find on the nVidia firewall on x64 I see you even posted 1 of
>> them
>>
>> "John Barnes" <jbarnes@email.net> wrote in message
>> news:OBt2EQX8GHA.4620@TK2MSFTNGP02.phx.gbl...
>>>I didn't have problems on x64 or x86, but many did. Not sure why it
>>>randomly happens, but it does. You have certainly seen the postings on
>>>the X64 site.
>>>
>>>
>>> "Dennis Pack" <dennispack at hotmail dot com> wrote in message
>>> news:9EAA005D-4405-434E-8A89-49F96791942F@microsoft.com...
>>>> John:
>>>> I have the A8N-E NF4 motherboard with only Nvidia NIC and I
>>>> haven't had any problems with the Vista installed drivers though build
>>>> 5744 with x64 or x86. I haven't installed any Nvidia drivers other than
>>>> the ones on the Vista disk.
>>>>
>>>>
>>>> "John Barnes" <jbarnes@email.net> wrote in message
>>>> news:u1C5y3W8GHA.4708@TK2MSFTNGP05.phx.gbl...
>>>>> No problem here either but doubt the nic likes me. Good thing too,
>>>>> since my nVidia nic has the firewall problem and I can't find a way to
>>>>> install it so I can uninstall it, so Marvell or nothing for me so far.
>>>>> Have you seen any solution for RC1?
>>>>>
>>>>> "Jane C" <jellybean@nospam.xjgarage.org> wrote in message
>>>>> news:8C97D47B-4D9B-41CD-A575-741CBA4F4684@microsoft.com...
>>>>>>I keep reading about the problems with the Marvell Yukon, which is the
>>>>>>nic I have. Haven't had any problems at all in any build with it!!
>>>>>>x86 and x64. Vista must like me ;-)
>>>>>>
>>>>>> --
>>>>>> Jane, not plain ;) 64 bit enabled :)
>>>>>> Batteries not included. Braincell on vacation :-)
>>>>>> "Rick Rogers" <rick@mvps.org> wrote in message
>>>>>> news:uzymy4J8GHA.4408@TK2MSFTNGP02.phx.gbl...
>>>>>>> Hi Matt,
>>>>>>>
>>>>>>> You have a Marvell Yukon network adapter? There is a known bug with
>>>>>>> this nic and RC1. I found the easiest solution to be to just install
>>>>>>> XP drivers for it over the Vista ones. It has been fixed in later
>>>>>>> builds.
>>>>>>>
>>>>>>> --
>>>>>>> Best of Luck,
>>>>>>>
>>>>>>> Rick Rogers, aka "Nutcase" - Microsoft MVP
>>>>>>> http://mvp.support.microsoft.com/
>>>>>>> Windows help - www.rickrogers.org
>>>>>>>
>>>>>>> "Matt" <Matt@discussions.microsoft.com> wrote in message
>>>>>>> news:0FE9423F-BAB8-46EC-A816-DD9CCE7E005E@microsoft.com...
>>>>>>>>I just got Vista RC1 and nothing related to connection the internet
>>>>>>>>seems to
>>>>>>>> be working including IE, Windows Update, Gagets dealing with the
>>>>>>>> web, and AIM.
>>>>>>>>
>>>>>>>> Whenver I diagnos the problem I get the error
>>>>>>>>
>>>>>>>> "www.XXXXX.com is not set up to establish a connection on port
>>>>>>>> "World Wide
>>>>>>>> Web service (HTTP) with this computer"
>>>>>>>>
>>>>>>>> Obviously I've checked to see if i have a good connection and I do.
>>>>>>>>
>>>>>>>> I don't know what else to do.
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>
>>>
>>>
>>
>>
>