I built a new system over the weekend and install Vista Ultimate and was
running fine for a day until I came back home from work the next day to find
the machine was turn off. So I turn it back on but it keep rebooting
everytime when it reaches the desktop with the following error:

Here is the message on the screen before it reboot:

A problem has been detected and windows has been shut down to prevent damage
to your computer.

MEMORY_MANAGEMENT

Technical information:
*** STOP: 0x0000001A (0x00041790,0xc0801648,0x0000FFFF,0x00000000)

and here is the dump after reboot to safe mode:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.0.6000.2.0.0.256.1
Locale ID: 4105

Additional information about the problem:
BCCode: 1a
BCP1: 00041790
BCP2: C0801648
BCP3: 0000FFFF
BCP4: 00000000
OS Version: 6_0_6000
Service Pack 0_0
Product: 256_1

I am not able to attach the 3 dump file here but if anyone need it to
analyse, I can certainly email them.

System configuration:
MB: EVGA e-7100/630i.
CPU : E2180
Memory : 2x1GB OCZ PC-6400
Hard Disk : Maxtor 250GB SATA II

Any kind of help will be very much appreciated.
Thomas

A couple of things to check. Make sure you have updated video drivers for
your system. Also it is possible that it might be a memory issue. Update
your drivers first and see if that fixes it. If not, you just might want to
run some memory tests. Swap memory if you can.

That is a good place to start.


"Thomas" <Thomas@discussions.microsoft.com> wrote in message
news:F653DD18-6730-4FB3-B334-B64C52EF63E9@microsoft.com...
>I built a new system over the weekend and install Vista Ultimate and was
> running fine for a day until I came back home from work the next day to
> find
> the machine was turn off. So I turn it back on but it keep rebooting
> everytime when it reaches the desktop with the following error:
>
> Here is the message on the screen before it reboot:
>
> A problem has been detected and windows has been shut down to prevent
> damage
> to your computer.
>
> MEMORY_MANAGEMENT
>
> Technical information:
> *** STOP: 0x0000001A (0x00041790,0xc0801648,0x0000FFFF,0x00000000)
>
> and here is the dump after reboot to safe mode:
>
> Problem signature:
> Problem Event Name: BlueScreen
> OS Version: 6.0.6000.2.0.0.256.1
> Locale ID: 4105
>
> Additional information about the problem:
> BCCode: 1a
> BCP1: 00041790
> BCP2: C0801648
> BCP3: 0000FFFF
> BCP4: 00000000
> OS Version: 6_0_6000
> Service Pack 0_0
> Product: 256_1
>
> I am not able to attach the 3 dump file here but if anyone need it to
> analyse, I can certainly email them.
>
> System configuration:
> MB: EVGA e-7100/630i.
> CPU : E2180
> Memory : 2x1GB OCZ PC-6400
> Hard Disk : Maxtor 250GB SATA II
>
> Any kind of help will be very much appreciated.
> Thomas

I run memtest against the memory and found 1 faulty memory. replace it and
now is up and running with no reboot. Hopefully, that's it.

"Bill Yanaire" wrote:

> A couple of things to check. Make sure you have updated video drivers for
> your system. Also it is possible that it might be a memory issue. Update
> your drivers first and see if that fixes it. If not, you just might want to
> run some memory tests. Swap memory if you can.
>
> That is a good place to start.
>
>
> "Thomas" <Thomas@discussions.microsoft.com> wrote in message
> news:F653DD18-6730-4FB3-B334-B64C52EF63E9@microsoft.com...
> >I built a new system over the weekend and install Vista Ultimate and was
> > running fine for a day until I came back home from work the next day to
> > find
> > the machine was turn off. So I turn it back on but it keep rebooting
> > everytime when it reaches the desktop with the following error:
> >
> > Here is the message on the screen before it reboot:
> >
> > A problem has been detected and windows has been shut down to prevent
> > damage
> > to your computer.
> >
> > MEMORY_MANAGEMENT
> >
> > Technical information:
> > *** STOP: 0x0000001A (0x00041790,0xc0801648,0x0000FFFF,0x00000000)
> >
> > and here is the dump after reboot to safe mode:
> >
> > Problem signature:
> > Problem Event Name: BlueScreen
> > OS Version: 6.0.6000.2.0.0.256.1
> > Locale ID: 4105
> >
> > Additional information about the problem:
> > BCCode: 1a
> > BCP1: 00041790
> > BCP2: C0801648
> > BCP3: 0000FFFF
> > BCP4: 00000000
> > OS Version: 6_0_6000
> > Service Pack 0_0
> > Product: 256_1
> >
> > I am not able to attach the 3 dump file here but if anyone need it to
> > analyse, I can certainly email them.
> >
> > System configuration:
> > MB: EVGA e-7100/630i.
> > CPU : E2180
> > Memory : 2x1GB OCZ PC-6400
> > Hard Disk : Maxtor 250GB SATA II
> >
> > Any kind of help will be very much appreciated.
> > Thomas
>
>
>