Hi all

Even though Duel core cpu is set in my bios and is listed under device
manager within Vista.
Yet when I check the performance manager, only one cpu is bening used.
i.e the graph in performance manager, only one cpu is shown.

Is there anywhere else in Vista I can check or a setting to change it?

My System is a Dell Dimesnion 9150 / XPS440
Vista Ultimate 64 bit
Intel cuel core, 3.2ghz
4gb ddram

Please reply to group or email
pmitche1(nospam)@bigpond.net.au
remove the (nospam)

TIA

Phil

believe you have to enable the dual cpu display.
do not know how to do so.
might check the ms knowledge base to see if there is an answer there.
or maybe even search google.



[email]mikeyhsd@comcast.net[/email]



"PM" <pmitche1(nospam)@bigpond.net.au> wrote in message news:3ot763tomvcn1eua0qhcvkt4ai9e8h3u6h@4ax.com...
Hi all

Even though Duel core cpu is set in my bios and is listed under device
manager within Vista.
Yet when I check the performance manager, only one cpu is bening used.
i.e the graph in performance manager, only one cpu is shown.

Is there anywhere else in Vista I can check or a setting to change it?

My System is a Dell Dimesnion 9150 / XPS440
Vista Ultimate 64 bit
Intel cuel core, 3.2ghz
4gb ddram

Please reply to group or email
pmitche1(nospam)@bigpond.net.au
remove the (nospam)

TIA

Phil

Are you takling about Task Manager, if so;

Select Performance tab, select from menu View > CPU History > One Graph per
CPU



"PM" <pmitche1(nospam)@bigpond.net.au> wrote in message
news:3ot763tomvcn1eua0qhcvkt4ai9e8h3u6h@4ax.com...[color=blue]
> Hi all
>
> Even though Duel core cpu is set in my bios and is listed under device
> manager within Vista.
> Yet when I check the performance manager, only one cpu is bening used.
> i.e the graph in performance manager, only one cpu is shown.
>
> Is there anywhere else in Vista I can check or a setting to change it?
>
> My System is a Dell Dimesnion 9150 / XPS440
> Vista Ultimate 64 bit
> Intel cuel core, 3.2ghz
> 4gb ddram
>
> Please reply to group or email
> pmitche1(nospam)@bigpond.net.au
> remove the (nospam)
>
> TIA
>
> Phil[/color]

On Tue, 5 Jun 2007 04:06:32 +0100, "grahamham" <notlimaharg@liamg.moc>
wrote:
[color=blue]
>Are you takling about Task Manager, if so;
>
>Select Performance tab, select from menu View > CPU History > One Graph per
>CPU
>[/color]
Hi and thanks for replies
yes I am and I tried that
Under view cpu history, that option is greyed out and says one graph
per cpu, it cannot be changed.
Now am I right to think as you suggested if Vista was using both cpu's
I should be able to change that?

Cheers
Phil[color=blue]
>
>
>"PM" <pmitche1(nospam)@bigpond.net.au> wrote in message
>news:3ot763tomvcn1eua0qhcvkt4ai9e8h3u6h@4ax.com...[color=green]
>> Hi all
>>
>> Even though Duel core cpu is set in my bios and is listed under device
>> manager within Vista.
>> Yet when I check the performance manager, only one cpu is bening used.
>> i.e the graph in performance manager, only one cpu is shown.
>>
>> Is there anywhere else in Vista I can check or a setting to change it?
>>
>> My System is a Dell Dimesnion 9150 / XPS440
>> Vista Ultimate 64 bit
>> Intel cuel core, 3.2ghz
>> 4gb ddram
>>
>> Please reply to group or email
>> pmitche1(nospam)@bigpond.net.au
>> remove the (nospam)
>>
>> TIA
>>
>> Phil[/color][/color]

One quick way to verify that a Multiprocessor HAL ( Hardware
Abstraction Layer ) is being used is to check the Processor category
in Device Manager. You should see two/independent entries for a
Dual-Core CPU.


"PM" <pmitchel(nospam)@bigpond.net.au> wrote in message
news:lsea6395ihnfkk62kevbtcmsp3svvr4gm7@4ax.com...[color=blue]
> On Tue, 5 Jun 2007 04:06:32 +0100, "grahamham" <notlimaharg@liamg.moc>
> wrote:
>[color=green]
>>Are you takling about Task Manager, if so;
>>
>>Select Performance tab, select from menu View > CPU History > One Graph
>>per
>>CPU
>>[/color]
> Hi and thanks for replies
> yes I am and I tried that
> Under view cpu history, that option is greyed out and says one graph
> per cpu, it cannot be changed.
> Now am I right to think as you suggested if Vista was using both cpu's
> I should be able to change that?
>
> Cheers
> Phil[color=green]
>>
>>
>>"PM" <pmitche1(nospam)@bigpond.net.au> wrote in message
>>news:3ot763tomvcn1eua0qhcvkt4ai9e8h3u6h@4ax.com...[color=darkred]
>>> Hi all
>>>
>>> Even though Duel core cpu is set in my bios and is listed under device
>>> manager within Vista.
>>> Yet when I check the performance manager, only one cpu is bening used.
>>> i.e the graph in performance manager, only one cpu is shown.
>>>
>>> Is there anywhere else in Vista I can check or a setting to change it?
>>>
>>> My System is a Dell Dimesnion 9150 / XPS440
>>> Vista Ultimate 64 bit
>>> Intel cuel core, 3.2ghz
>>> 4gb ddram
>>>
>>> Please reply to group or email
>>> pmitche1(nospam)@bigpond.net.au
>>> remove the (nospam)
>>>
>>> TIA
>>>
>>> Phil[/color][/color]
>[/color]

On Tue, 5 Jun 2007 06:56:42 -0400, "R. McCarty"
<PcEngWork-NoSpam_@mindspring.com> wrote:
[color=blue]
>One quick way to verify that a Multiprocessor HAL ( Hardware
>Abstraction Layer ) is being used is to check the Processor category
>in Device Manager. You should see two/independent entries for a
>Dual-Core CPU.[/color]
Yes I've checked that

Under device manager it has.

Two Intel Pentium (R) D CPU 3.2GHz This is correct
Yet
Under system ( where the Index Base score is shown) It says

Intel Pentium (R) D CPU 3.20GHz 3.19GHz
Is that correct?
tia
Phil


[color=blue]
>
>
>"PM" <pmitchel(nospam)@bigpond.net.au> wrote in message
>news:lsea6395ihnfkk62kevbtcmsp3svvr4gm7@4ax.com...[color=green]
>> On Tue, 5 Jun 2007 04:06:32 +0100, "grahamham" <notlimaharg@liamg.moc>
>> wrote:
>>[color=darkred]
>>>Are you takling about Task Manager, if so;
>>>
>>>Select Performance tab, select from menu View > CPU History > One Graph
>>>per
>>>CPU
>>>[/color]
>> Hi and thanks for replies
>> yes I am and I tried that
>> Under view cpu history, that option is greyed out and says one graph
>> per cpu, it cannot be changed.
>> Now am I right to think as you suggested if Vista was using both cpu's
>> I should be able to change that?
>>
>> Cheers
>> Phil[color=darkred]
>>>
>>>
>>>"PM" <pmitche1(nospam)@bigpond.net.au> wrote in message
>>>news:3ot763tomvcn1eua0qhcvkt4ai9e8h3u6h@4ax.com...
>>>> Hi all
>>>>
>>>> Even though Duel core cpu is set in my bios and is listed under device
>>>> manager within Vista.
>>>> Yet when I check the performance manager, only one cpu is bening used.
>>>> i.e the graph in performance manager, only one cpu is shown.
>>>>
>>>> Is there anywhere else in Vista I can check or a setting to change it?
>>>>
>>>> My System is a Dell Dimesnion 9150 / XPS440
>>>> Vista Ultimate 64 bit
>>>> Intel cuel core, 3.2ghz
>>>> 4gb ddram
>>>>
>>>> Please reply to group or email
>>>> pmitche1(nospam)@bigpond.net.au
>>>> remove the (nospam)
>>>>
>>>> TIA
>>>>
>>>> Phil[/color]
>>[/color]
>[/color]

On Wed, 06 Jun 2007 07:57:27 GMT, "Phil (PM)"
<pmitchel(nospam)@bigpond.net.au> wrote:
[color=blue]
>On Tue, 5 Jun 2007 06:56:42 -0400, "R. McCarty"
><PcEngWork-NoSpam_@mindspring.com> wrote:
>[color=green]
>>One quick way to verify that a Multiprocessor HAL ( Hardware
>>Abstraction Layer ) is being used is to check the Processor category
>>in Device Manager. You should see two/independent entries for a
>>Dual-Core CPU.[/color]
>Yes I've checked that
>
>Under device manager it has.
>
>Two Intel Pentium (R) D CPU 3.2GHz This is correct
>Yet
>Under system ( where the Index Base score is shown) It says
>
>Intel Pentium (R) D CPU 3.20GHz 3.19GHz
>Is that correct?
>tia
>Phil
>
>
>[color=green]
>>
>>
>>"PM" <pmitchel(nospam)@bigpond.net.au> wrote in message
>>news:lsea6395ihnfkk62kevbtcmsp3svvr4gm7@4ax.com...[color=darkred]
>>> On Tue, 5 Jun 2007 04:06:32 +0100, "grahamham" <notlimaharg@liamg.moc>
>>> wrote:
>>>
>>>>Are you takling about Task Manager, if so;
>>>>
>>>>Select Performance tab, select from menu View > CPU History > One Graph
>>>>per
>>>>CPU
>>>>
>>> Hi and thanks for replies
>>> yes I am and I tried that
>>> Under view cpu history, that option is greyed out and says one graph
>>> per cpu, it cannot be changed.
>>> Now am I right to think as you suggested if Vista was using both cpu's
>>> I should be able to change that?
>>>
>>> Cheers
>>> Phil
>>>>
>>>>
>>>>"PM" <pmitche1(nospam)@bigpond.net.au> wrote in message
>>>>news:3ot763tomvcn1eua0qhcvkt4ai9e8h3u6h@4ax.com...
>>>>> Hi all
>>>>>
>>>>> Even though Duel core cpu is set in my bios and is listed under device
>>>>> manager within Vista.
>>>>> Yet when I check the performance manager, only one cpu is bening used.
>>>>> i.e the graph in performance manager, only one cpu is shown.
>>>>>
>>>>> Is there anywhere else in Vista I can check or a setting to change it?
>>>>>
>>>>> My System is a Dell Dimesnion 9150 / XPS440
>>>>> Vista Ultimate 64 bit
>>>>> Intel cuel core, 3.2ghz
>>>>> 4gb ddram
>>>>>
>>>>> Please reply to group or email
>>>>> pmitche1(nospam)@bigpond.net.au
>>>>> remove the (nospam)
>>>>>
>>>>> TIA
>>>>>
>>>>> Phil
>>>[/color]
>>[/color][/color]

Thought I should add, processor is a Intel D 940 processor