Technology Questions

Go Back   Technology Questions > Software Questions > Operating System Questions > Vista Community > Windows Vista

Windows Vista Discuss the different versions of Windows Vista, Fuji, or Vienna

Reply
 
LinkBack Thread Tools
  #1 (permalink)  
Old 01-02-2007, 10:55 AM
Sue Smith
Newsgroup Contributor
 
Posts: n/a
Update or Instal Vista fails "Windows could not update registry da

I have been trying to upgrade XP Professional to Vista on a Dell Inspiron
5150, bu the installation eventually fails after installing all the files
with an error "Windows could not update registry data in the installation".

The "Upgrade Adviser" found an issue with older driver for wireless network
card, but I installed newer version, and that is now fine.

I have also tried a 'clean' install, rather than an upgrade, and get the
same error - which would suggest it is a hardware/disk/file problem rather
than some existing drivers/apps on the machine.

The ISO DVD is fine and I have verified the Sha checksum.

Any ideas anyone?

cheers.



Sue


Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote

 
Old 01-02-2007, 10:55 AM
  #2 (permalink)  
Old 01-02-2007, 10:56 AM
Frank Saunders, MS-MVP OE/WM
Newsgroup Contributor
 
Posts: n/a
Re: Update or Instal Vista fails "Windows could not update registry da

"Sue Smith" <SueSmith@discussions.microsoft.com> wrote in message
news:0BBC0A79-DBBB-4375-A151-E31CFB69AC28@microsoft.com...[color=blue]
>I have been trying to upgrade XP Professional to Vista on a Dell Inspiron
> 5150, bu the installation eventually fails after installing all the files
> with an error "Windows could not update registry data in the
> installation".
>
> The "Upgrade Adviser" found an issue with older driver for wireless
> network
> card, but I installed newer version, and that is now fine.
>
> I have also tried a 'clean' install, rather than an upgrade, and get the
> same error - which would suggest it is a hardware/disk/file problem rather
> than some existing drivers/apps on the machine.
>
> The ISO DVD is fine and I have verified the Sha checksum.[/color]


It might be a security program blocking the Registry changes it needs to
make. A few of the programs now doing this are:
Ad-aware's Ad-Watch
McAfee VirusScan and/or Antispyware
Norton AV
Spyware Blaster
Spybot> Tools> IE Tweaks
Spybot- Teatimer
Spysweeper
Zone Alarm (free) 6.5 Reported to be fixed in later versions.

In the case of Zone Alarm 6.5 and Norton 2007 it actually has to be
uninstalled. Make sure the Windows Firewall is turned on until you
reinstall Zone Alarm.

Boot into Safe Mode with Networking with Networking and try the upgrade.

--
Frank Saunders, MS-MVP OE/WM
[url]http://www.fjsmjs.com[/url]
Answer in newsgroup. Don't send mail.


Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote

  #3 (permalink)  
Old 01-02-2007, 10:56 AM
Frank Saunders, MS-MVP OE/WM
Newsgroup Contributor
 
Posts: n/a
Re: Update or Instal Vista fails "Windows could not update registry da

"Sue Smith" <SueSmith@discussions.microsoft.com> wrote in message
news:0BBC0A79-DBBB-4375-A151-E31CFB69AC28@microsoft.com...[color=blue]
>I have been trying to upgrade XP Professional to Vista on a Dell Inspiron
> 5150, bu the installation eventually fails after installing all the files
> with an error "Windows could not update registry data in the
> installation".
>
> The "Upgrade Adviser" found an issue with older driver for wireless
> network
> card, but I installed newer version, and that is now fine.
>
> I have also tried a 'clean' install, rather than an upgrade, and get the
> same error - which would suggest it is a hardware/disk/file problem rather
> than some existing drivers/apps on the machine.
>
> The ISO DVD is fine and I have verified the Sha checksum.[/color]


It might be a security program blocking the Registry changes it needs to
make. A few of the programs now doing this are:
Ad-aware's Ad-Watch
McAfee VirusScan and/or Antispyware
Norton AV
Spyware Blaster
Spybot> Tools> IE Tweaks
Spybot- Teatimer
Spysweeper
Zone Alarm (free) 6.5 Reported to be fixed in later versions.

In the case of Zone Alarm 6.5 and Norton 2007 it actually has to be
uninstalled. Make sure the Windows Firewall is turned on until you
reinstall Zone Alarm.

Boot into Safe Mode with Networking with Networking and try the upgrade.

--
Frank Saunders, MS-MVP OE/WM
[url]http://www.fjsmjs.com[/url]
Answer in newsgroup. Don't send mail.


Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote

  #4 (permalink)  
Old 01-02-2007, 10:57 AM
Sue Smith
Newsgroup Contributor
 
Posts: n/a
Re: Update or Instal Vista fails "Windows could not update registr

Thanks for the suggestions.

I did have Norton Systemworks installed, but I had uninstalled it before I
tried the upgrade. I have been through and removed most things that could
even possibly cause problems...almost nothing left!

I have tried going into Safe mode, but the Vista Upgrade is disabled and
says it cannot be run from Safe mode.

So I am having to try a clean install from Safe mode instead.

We'll see.



"Frank Saunders, MS-MVP OE/WM" wrote:
[color=blue]
> "Sue Smith" <SueSmith@discussions.microsoft.com> wrote in message
> news:0BBC0A79-DBBB-4375-A151-E31CFB69AC28@microsoft.com...[color=green]
> >I have been trying to upgrade XP Professional to Vista on a Dell Inspiron
> > 5150, bu the installation eventually fails after installing all the files
> > with an error "Windows could not update registry data in the
> > installation".
> >
> > The "Upgrade Adviser" found an issue with older driver for wireless
> > network
> > card, but I installed newer version, and that is now fine.
> >
> > I have also tried a 'clean' install, rather than an upgrade, and get the
> > same error - which would suggest it is a hardware/disk/file problem rather
> > than some existing drivers/apps on the machine.
> >
> > The ISO DVD is fine and I have verified the Sha checksum.[/color]
>
>
> It might be a security program blocking the Registry changes it needs to
> make. A few of the programs now doing this are:
> Ad-aware's Ad-Watch
> McAfee VirusScan and/or Antispyware
> Norton AV
> Spyware Blaster
> Spybot> Tools> IE Tweaks
> Spybot- Teatimer
> Spysweeper
> Zone Alarm (free) 6.5 Reported to be fixed in later versions.
>
> In the case of Zone Alarm 6.5 and Norton 2007 it actually has to be
> uninstalled. Make sure the Windows Firewall is turned on until you
> reinstall Zone Alarm.
>
> Boot into Safe Mode with Networking with Networking and try the upgrade.
>
> --
> Frank Saunders, MS-MVP OE/WM
> [url]http://www.fjsmjs.com[/url]
> Answer in newsgroup. Don't send mail.
>
>[/color]
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote

  #5 (permalink)  
Old 01-02-2007, 10:57 AM
Sue Smith
Newsgroup Contributor
 
Posts: n/a
Re: Update or Instal Vista fails "Windows could not update registr

Thanks for the suggestions.

I did have Norton Systemworks installed, but I had uninstalled it before I
tried the upgrade. I have been through and removed most things that could
even possibly cause problems...almost nothing left!

I have tried going into Safe mode, but the Vista Upgrade is disabled and
says it cannot be run from Safe mode.

So I am having to try a clean install from Safe mode instead.

We'll see.



"Frank Saunders, MS-MVP OE/WM" wrote:
[color=blue]
> "Sue Smith" <SueSmith@discussions.microsoft.com> wrote in message
> news:0BBC0A79-DBBB-4375-A151-E31CFB69AC28@microsoft.com...[color=green]
> >I have been trying to upgrade XP Professional to Vista on a Dell Inspiron
> > 5150, bu the installation eventually fails after installing all the files
> > with an error "Windows could not update registry data in the
> > installation".
> >
> > The "Upgrade Adviser" found an issue with older driver for wireless
> > network
> > card, but I installed newer version, and that is now fine.
> >
> > I have also tried a 'clean' install, rather than an upgrade, and get the
> > same error - which would suggest it is a hardware/disk/file problem rather
> > than some existing drivers/apps on the machine.
> >
> > The ISO DVD is fine and I have verified the Sha checksum.[/color]
>
>
> It might be a security program blocking the Registry changes it needs to
> make. A few of the programs now doing this are:
> Ad-aware's Ad-Watch
> McAfee VirusScan and/or Antispyware
> Norton AV
> Spyware Blaster
> Spybot> Tools> IE Tweaks
> Spybot- Teatimer
> Spysweeper
> Zone Alarm (free) 6.5 Reported to be fixed in later versions.
>
> In the case of Zone Alarm 6.5 and Norton 2007 it actually has to be
> uninstalled. Make sure the Windows Firewall is turned on until you
> reinstall Zone Alarm.
>
> Boot into Safe Mode with Networking with Networking and try the upgrade.
>
> --
> Frank Saunders, MS-MVP OE/WM
> [url]http://www.fjsmjs.com[/url]
> Answer in newsgroup. Don't send mail.
>
>[/color]
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote

  #6 (permalink)  
Old 01-02-2007, 10:57 AM
Sue Smith
Newsgroup Contributor
 
Posts: n/a
RE: Update or Instal Vista fails "Windows could not update registry da

Nope. Same problem.

Clean install from Safe mode, although a *lot* quicker, still comes up with:

"Windows could not update the registry data in the installation".

I don't understand this, since a clean install should be able to write to
its own registry!

Any other ideas???

thx.


"Sue Smith" wrote:
[color=blue]
> I have been trying to upgrade XP Professional to Vista on a Dell Inspiron
> 5150, bu the installation eventually fails after installing all the files
> with an error "Windows could not update registry data in the installation".
>
> The "Upgrade Adviser" found an issue with older driver for wireless network
> card, but I installed newer version, and that is now fine.
>
> I have also tried a 'clean' install, rather than an upgrade, and get the
> same error - which would suggest it is a hardware/disk/file problem rather
> than some existing drivers/apps on the machine.
>
> The ISO DVD is fine and I have verified the Sha checksum.
>
> Any ideas anyone?
>
> cheers.
>
>
>
> Sue
>
>[/color]
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote

  #7 (permalink)  
Old 01-02-2007, 10:57 AM
Sue Smith
Newsgroup Contributor
 
Posts: n/a
RE: Update or Instal Vista fails "Windows could not update registry da

Nope. Same problem.

Clean install from Safe mode, although a *lot* quicker, still comes up with:

"Windows could not update the registry data in the installation".

I don't understand this, since a clean install should be able to write to
its own registry!

Any other ideas???

thx.


"Sue Smith" wrote:
[color=blue]
> I have been trying to upgrade XP Professional to Vista on a Dell Inspiron
> 5150, bu the installation eventually fails after installing all the files
> with an error "Windows could not update registry data in the installation".
>
> The "Upgrade Adviser" found an issue with older driver for wireless network
> card, but I installed newer version, and that is now fine.
>
> I have also tried a 'clean' install, rather than an upgrade, and get the
> same error - which would suggest it is a hardware/disk/file problem rather
> than some existing drivers/apps on the machine.
>
> The ISO DVD is fine and I have verified the Sha checksum.
>
> Any ideas anyone?
>
> cheers.
>
>
>
> Sue
>
>[/color]
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote

  #8 (permalink)  
Old 01-02-2007, 10:57 AM
Colin Barnhorst
Newsgroup Contributor
 
Posts: n/a
Re: Update or Instal Vista fails "Windows could not update registry da

Is there a BIOS update available for your motherboard?

"Sue Smith" <SueSmith@discussions.microsoft.com> wrote in message
news:0BBC0A79-DBBB-4375-A151-E31CFB69AC28@microsoft.com...[color=blue]
>I have been trying to upgrade XP Professional to Vista on a Dell Inspiron
> 5150, bu the installation eventually fails after installing all the files
> with an error "Windows could not update registry data in the
> installation".
>
> The "Upgrade Adviser" found an issue with older driver for wireless
> network
> card, but I installed newer version, and that is now fine.
>
> I have also tried a 'clean' install, rather than an upgrade, and get the
> same error - which would suggest it is a hardware/disk/file problem rather
> than some existing drivers/apps on the machine.
>
> The ISO DVD is fine and I have verified the Sha checksum.
>
> Any ideas anyone?
>
> cheers.
>
>
>
> Sue
>
>[/color]

Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote

  #9 (permalink)  
Old 01-02-2007, 10:57 AM
Colin Barnhorst
Newsgroup Contributor
 
Posts: n/a
Re: Update or Instal Vista fails "Windows could not update registry da

Is there a BIOS update available for your motherboard?

"Sue Smith" <SueSmith@discussions.microsoft.com> wrote in message
news:0BBC0A79-DBBB-4375-A151-E31CFB69AC28@microsoft.com...[color=blue]
>I have been trying to upgrade XP Professional to Vista on a Dell Inspiron
> 5150, bu the installation eventually fails after installing all the files
> with an error "Windows could not update registry data in the
> installation".
>
> The "Upgrade Adviser" found an issue with older driver for wireless
> network
> card, but I installed newer version, and that is now fine.
>
> I have also tried a 'clean' install, rather than an upgrade, and get the
> same error - which would suggest it is a hardware/disk/file problem rather
> than some existing drivers/apps on the machine.
>
> The ISO DVD is fine and I have verified the Sha checksum.
>
> Any ideas anyone?
>
> cheers.
>
>
>
> Sue
>
>[/color]

Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote

  #10 (permalink)  
Old 01-02-2007, 10:57 AM
Sue Smith
Newsgroup Contributor
 
Posts: n/a
Re: Update or Instal Vista fails "Windows could not update registr

Unfortunately nothing since the once that is on there right now, which was
12/2004.

"Colin Barnhorst" wrote:
[color=blue]
> Is there a BIOS update available for your motherboard?
>
> "Sue Smith" <SueSmith@discussions.microsoft.com> wrote in message
> news:0BBC0A79-DBBB-4375-A151-E31CFB69AC28@microsoft.com...[color=green]
> >I have been trying to upgrade XP Professional to Vista on a Dell Inspiron
> > 5150, bu the installation eventually fails after installing all the files
> > with an error "Windows could not update registry data in the
> > installation".
> >
> > The "Upgrade Adviser" found an issue with older driver for wireless
> > network
> > card, but I installed newer version, and that is now fine.
> >
> > I have also tried a 'clean' install, rather than an upgrade, and get the
> > same error - which would suggest it is a hardware/disk/file problem rather
> > than some existing drivers/apps on the machine.
> >
> > The ISO DVD is fine and I have verified the Sha checksum.
> >
> > Any ideas anyone?
> >
> > cheers.
> >
> >
> >
> > Sue
> >
> >[/color]
>
>[/color]
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote

  #11 (permalink)  
Old 01-02-2007, 10:57 AM
Sue Smith
Newsgroup Contributor
 
Posts: n/a
Re: Update or Instal Vista fails "Windows could not update registr

Unfortunately nothing since the once that is on there right now, which was
12/2004.

"Colin Barnhorst" wrote:
[color=blue]
> Is there a BIOS update available for your motherboard?
>
> "Sue Smith" <SueSmith@discussions.microsoft.com> wrote in message
> news:0BBC0A79-DBBB-4375-A151-E31CFB69AC28@microsoft.com...[color=green]
> >I have been trying to upgrade XP Professional to Vista on a Dell Inspiron
> > 5150, bu the installation eventually fails after installing all the files
> > with an error "Windows could not update registry data in the
> > installation".
> >
> > The "Upgrade Adviser" found an issue with older driver for wireless
> > network
> > card, but I installed newer version, and that is now fine.
> >
> > I have also tried a 'clean' install, rather than an upgrade, and get the
> > same error - which would suggest it is a hardware/disk/file problem rather
> > than some existing drivers/apps on the machine.
> >
> > The ISO DVD is fine and I have verified the Sha checksum.
> >
> > Any ideas anyone?
> >
> > cheers.
> >
> >
> >
> > Sue
> >
> >[/color]
>
>[/color]
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote

  #12 (permalink)  
Old 01-02-2007, 10:57 AM
Colin Barnhorst
Newsgroup Contributor
 
Posts: n/a
Re: Update or Instal Vista fails "Windows could not update registr


"Sue Smith" <SueSmith@discussions.microsoft.com> wrote in message
news:98E75FF4-9A90-4E07-8481-1EF1D10D3700@microsoft.com...[color=blue]
> Unfortunately nothing since the once that is on there right now, which was
> 12/2004.
>
> "Colin Barnhorst" wrote:
>[color=green]
>> Is there a BIOS update available for your motherboard?
>>
>> "Sue Smith" <SueSmith@discussions.microsoft.com> wrote in message
>> news:0BBC0A79-DBBB-4375-A151-E31CFB69AC28@microsoft.com...[color=darkred]
>> >I have been trying to upgrade XP Professional to Vista on a Dell
>> >Inspiron
>> > 5150, bu the installation eventually fails after installing all the
>> > files
>> > with an error "Windows could not update registry data in the
>> > installation".
>> >
>> > The "Upgrade Adviser" found an issue with older driver for wireless
>> > network
>> > card, but I installed newer version, and that is now fine.
>> >
>> > I have also tried a 'clean' install, rather than an upgrade, and get
>> > the
>> > same error - which would suggest it is a hardware/disk/file problem
>> > rather
>> > than some existing drivers/apps on the machine.
>> >
>> > The ISO DVD is fine and I have verified the Sha checksum.
>> >
>> > Any ideas anyone?
>> >
>> > cheers.
>> >
>> >
>> >
>> > Sue
>> >
>> >[/color]
>>
>>[/color][/color]

Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote

  #13 (permalink)  
Old 01-02-2007, 10:57 AM
Colin Barnhorst
Newsgroup Contributor
 
Posts: n/a
Re: Update or Instal Vista fails "Windows could not update registr


"Sue Smith" <SueSmith@discussions.microsoft.com> wrote in message
news:98E75FF4-9A90-4E07-8481-1EF1D10D3700@microsoft.com...[color=blue]
> Unfortunately nothing since the once that is on there right now, which was
> 12/2004.
>
> "Colin Barnhorst" wrote:
>[color=green]
>> Is there a BIOS update available for your motherboard?
>>
>> "Sue Smith" <SueSmith@discussions.microsoft.com> wrote in message
>> news:0BBC0A79-DBBB-4375-A151-E31CFB69AC28@microsoft.com...[color=darkred]
>> >I have been trying to upgrade XP Professional to Vista on a Dell
>> >Inspiron
>> > 5150, bu the installation eventually fails after installing all the
>> > files
>> > with an error "Windows could not update registry data in the
>> > installation".
>> >
>> > The "Upgrade Adviser" found an issue with older driver for wireless
>> > network
>> > card, but I installed newer version, and that is now fine.
>> >
>> > I have also tried a 'clean' install, rather than an upgrade, and get
>> > the
>> > same error - which would suggest it is a hardware/disk/file problem
>> > rather
>> > than some existing drivers/apps on the machine.
>> >
>> > The ISO DVD is fine and I have verified the Sha checksum.
>> >
>> > Any ideas anyone?
>> >
>> > cheers.
>> >
>> >
>> >
>> > Sue
>> >
>> >[/color]
>>
>>[/color][/color]

Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote

  #14 (permalink)  
Old 01-02-2007, 10:57 AM
Colin Barnhorst
Newsgroup Contributor
 
Posts: n/a
Re: Update or Instal Vista fails "Windows could not update registr

Disregard. Hit the wrong button.

"Colin Barnhorst" <colinbarharst@msn.com> wrote in message
news:83680E6B-4B28-420A-A932-96D4C46C72B1@microsoft.com...[color=blue]
>
> "Sue Smith" <SueSmith@discussions.microsoft.com> wrote in message
> news:98E75FF4-9A90-4E07-8481-1EF1D10D3700@microsoft.com...[color=green]
>> Unfortunately nothing since the once that is on there right now, which
>> was
>> 12/2004.
>>
>> "Colin Barnhorst" wrote:
>>[color=darkred]
>>> Is there a BIOS update available for your motherboard?
>>>
>>> "Sue Smith" <SueSmith@discussions.microsoft.com> wrote in message
>>> news:0BBC0A79-DBBB-4375-A151-E31CFB69AC28@microsoft.com...
>>> >I have been trying to upgrade XP Professional to Vista on a Dell
>>> >Inspiron
>>> > 5150, bu the installation eventually fails after installing all the
>>> > files
>>> > with an error "Windows could not update registry data in the
>>> > installation".
>>> >
>>> > The "Upgrade Adviser" found an issue with older driver for wireless
>>> > network
>>> > card, but I installed newer version, and that is now fine.
>>> >
>>> > I have also tried a 'clean' install, rather than an upgrade, and get
>>> > the
>>> > same error - which would suggest it is a hardware/disk/file problem
>>> > rather
>>> > than some existing drivers/apps on the machine.
>>> >
>>> > The ISO DVD is fine and I have verified the Sha checksum.
>>> >
>>> > Any ideas anyone?
>>> >
>>> > cheers.
>>> >
>>> >
>>> >
>>> > Sue
>>> >
>>> >
>>>
>>>[/color][/color]
>[/color]

Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote

  #15 (permalink)  
Old 01-02-2007, 10:57 AM
Colin Barnhorst
Newsgroup Contributor
 
Posts: n/a
Re: Update or Instal Vista fails "Windows could not update registr

Disregard. Hit the wrong button.

"Colin Barnhorst" <colinbarharst@msn.com> wrote in message
news:83680E6B-4B28-420A-A932-96D4C46C72B1@microsoft.com...[color=blue]
>
> "Sue Smith" <SueSmith@discussions.microsoft.com> wrote in message
> news:98E75FF4-9A90-4E07-8481-1EF1D10D3700@microsoft.com...[color=green]
>> Unfortunately nothing since the once that is on there right now, which
>> was
>> 12/2004.
>>
>> "Colin Barnhorst" wrote:
>>[color=darkred]
>>> Is there a BIOS update available for your motherboard?
>>>
>>> "Sue Smith" <SueSmith@discussions.microsoft.com> wrote in message
>>> news:0BBC0A79-DBBB-4375-A151-E31CFB69AC28@microsoft.com...
>>> >I have been trying to upgrade XP Professional to Vista on a Dell
>>> >Inspiron
>>> > 5150, bu the installation eventually fails after installing all the
>>> > files
>>> > with an error "Windows could not update registry data in the
>>> > installation".
>>> >
>>> > The "Upgrade Adviser" found an issue with older driver for wireless
>>> > network
>>> > card, but I installed newer version, and that is now fine.
>>> >
>>> > I have also tried a 'clean' install, rather than an upgrade, and get
>>> > the
>>> > same error - which would suggest it is a hardware/disk/file problem
>>> > rather
>>> > than some existing drivers/apps on the machine.
>>> >
>>> > The ISO DVD is fine and I have verified the Sha checksum.
>>> >
>>> > Any ideas anyone?
>>> >
>>> > cheers.
>>> >
>>> >
>>> >
>>> > Sue
>>> >
>>> >
>>>
>>>[/color][/color]
>[/color]

Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote

Reply

Bookmarks

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is Off
Smilies are Off
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
RE: Intel Chipset Update via Windows Update Fails to Install Engel Windows Vista 1 06-15-2007 05:00 AM
RE: Intel Chipset Update via Windows Update Fails to Install freddy Vista Hardware 0 06-14-2007 12:30 PM
RE: Intel Chipset Update via Windows Update Fails to Install freddy Windows Vista 0 06-14-2007 12:30 PM
The Vista Windows update repeatedly fails to install a "recommended" driver. Trond Ruud Vista Hardware 1 06-12-2007 12:50 PM
The Vista Windows update repeatedly fails to install a "recommended" driver. Trond Ruud Windows Vista 1 06-12-2007 12:50 PM


New To Technology Questions? Do You Need Help with Your Computer or Device? Do You Need Help with this site?

All times are GMT -8. The time now is 10:13 AM.


2003 - 2009 All Rights Reserved. Technology Questions

Search Engine Friendly URLs by vBSEO 3.3.0