Hi all
I have just installed a new mobo. (Intel D945PVS)
I have never had this problem before with intel board or other brands.
I have Vista installed on SATA 0, Storage on SATA 1, XP on sata 2.
On my other boards I could use the boot popup menue to chose my operating
system.
But on this board it will only boot to SATA 0.
If I switch XP to SATA 0 it will boot XP only.
I do not have dual boot setup.
Each op system was installed on that HD,the only one connected at that time.
Has anyone used this board and had this problem ?
I don't see anything in BIOS to change this.
It don't matter which hard drive I set in bios to boot first it only boots
whatever is on SATA 0.
Thanks

--
Carl G

"Carl G" <cgerving@msnDOTcom> wrote in message
news:A8B4E587-31B2-4A4E-B9F6-FFFDEA778EF3@microsoft.com...
> Hi all
> I have just installed a new mobo. (Intel D945PVS)
> I have never had this problem before with intel board or other brands.
> I have Vista installed on SATA 0, Storage on SATA 1, XP on sata 2.
> On my other boards I could use the boot popup menue to chose my
> operating system.
> But on this board it will only boot to SATA 0.
> If I switch XP to SATA 0 it will boot XP only.
> I do not have dual boot setup.
> Each op system was installed on that HD,the only one connected at that
> time.
> Has anyone used this board and had this problem ?
> I don't see anything in BIOS to change this.
> It don't matter which hard drive I set in bios to boot first it only
> boots whatever is on SATA 0.
> Thanks


On hdd connected to SATA 0 install any bootmanager with "drive swapping"
option and use it to boot other operating systems. I recommend BootIt
Next Generation http://www.terabyteunlimited.com . "Drive swapping" is
in fact what your BIOS do.
--
M. [Windows - Shell/User MVP]
/before private reply change px with pl in my e-mail address/

"Carl G" <cgerving@msnDOTcom> wrote in message
news:A8B4E587-31B2-4A4E-B9F6-FFFDEA778EF3@microsoft.com...
> Hi all
> I have just installed a new mobo. (Intel D945PVS)
> I have never had this problem before with intel board or other brands.
> I have Vista installed on SATA 0, Storage on SATA 1, XP on sata 2.
> On my other boards I could use the boot popup menue to chose my
> operating system.
> But on this board it will only boot to SATA 0.
> If I switch XP to SATA 0 it will boot XP only.
> I do not have dual boot setup.
> Each op system was installed on that HD,the only one connected at that
> time.
> Has anyone used this board and had this problem ?
> I don't see anything in BIOS to change this.
> It don't matter which hard drive I set in bios to boot first it only
> boots whatever is on SATA 0.
> Thanks


On hdd connected to SATA 0 install any bootmanager with "drive swapping"
option and use it to boot other operating systems. I recommend BootIt
Next Generation http://www.terabyteunlimited.com . "Drive swapping" is
in fact what your BIOS do.
--
M. [Windows - Shell/User MVP]
/before private reply change px with pl in my e-mail address/

Hi M.
Thanks for the reply. Looks like no one else has had this problem with this
board.
I am awaiteing a reply from Intel now. I don't want to have to buy a boot
loader , this bios SHOULD do this,I have done this on other motherboards
including Intel. Don't know why this one won't.
Thanks again for the sugestion though.

--
Carl G

"Michal Kawecki" <kkwinto@o2.pl> wrote in message
news:OZmDpTUbHHA.3584@TK2MSFTNGP02.phx.gbl...
> "Carl G" <cgerving@msnDOTcom> wrote in message
> news:A8B4E587-31B2-4A4E-B9F6-FFFDEA778EF3@microsoft.com...
>> Hi all
>> I have just installed a new mobo. (Intel D945PVS)
>> I have never had this problem before with intel board or other brands.
>> I have Vista installed on SATA 0, Storage on SATA 1, XP on sata 2.
>> On my other boards I could use the boot popup menue to chose my operating
>> system.
>> But on this board it will only boot to SATA 0.
>> If I switch XP to SATA 0 it will boot XP only.
>> I do not have dual boot setup.
>> Each op system was installed on that HD,the only one connected at that
>> time.
>> Has anyone used this board and had this problem ?
>> I don't see anything in BIOS to change this.
>> It don't matter which hard drive I set in bios to boot first it only
>> boots whatever is on SATA 0.
>> Thanks
>
>
> On hdd connected to SATA 0 install any bootmanager with "drive swapping"
> option and use it to boot other operating systems. I recommend BootIt Next
> Generation http://www.terabyteunlimited.com . "Drive swapping" is in fact
> what your BIOS do.
> --
> M. [Windows - Shell/User MVP]
> /before private reply change px with pl in my e-mail address/

Hi M.
Thanks for the reply. Looks like no one else has had this problem with this
board.
I am awaiteing a reply from Intel now. I don't want to have to buy a boot
loader , this bios SHOULD do this,I have done this on other motherboards
including Intel. Don't know why this one won't.
Thanks again for the sugestion though.

--
Carl G

"Michal Kawecki" <kkwinto@o2.pl> wrote in message
news:OZmDpTUbHHA.3584@TK2MSFTNGP02.phx.gbl...
> "Carl G" <cgerving@msnDOTcom> wrote in message
> news:A8B4E587-31B2-4A4E-B9F6-FFFDEA778EF3@microsoft.com...
>> Hi all
>> I have just installed a new mobo. (Intel D945PVS)
>> I have never had this problem before with intel board or other brands.
>> I have Vista installed on SATA 0, Storage on SATA 1, XP on sata 2.
>> On my other boards I could use the boot popup menue to chose my operating
>> system.
>> But on this board it will only boot to SATA 0.
>> If I switch XP to SATA 0 it will boot XP only.
>> I do not have dual boot setup.
>> Each op system was installed on that HD,the only one connected at that
>> time.
>> Has anyone used this board and had this problem ?
>> I don't see anything in BIOS to change this.
>> It don't matter which hard drive I set in bios to boot first it only
>> boots whatever is on SATA 0.
>> Thanks
>
>
> On hdd connected to SATA 0 install any bootmanager with "drive swapping"
> option and use it to boot other operating systems. I recommend BootIt Next
> Generation http://www.terabyteunlimited.com . "Drive swapping" is in fact
> what your BIOS do.
> --
> M. [Windows - Shell/User MVP]
> /before private reply change px with pl in my e-mail address/

Hi All
Got my problem sorted out.
Thanks for the response.
Thanks

--
Carl G

"Carl G" <cgerving@msnDOTcom> wrote in message
news:A8B4E587-31B2-4A4E-B9F6-FFFDEA778EF3@microsoft.com...
> Hi all
> I have just installed a new mobo. (Intel D945PVS)
> I have never had this problem before with intel board or other brands.
> I have Vista installed on SATA 0, Storage on SATA 1, XP on sata 2.
> On my other boards I could use the boot popup menue to chose my operating
> system.
> But on this board it will only boot to SATA 0.
> If I switch XP to SATA 0 it will boot XP only.
> I do not have dual boot setup.
> Each op system was installed on that HD,the only one connected at that
> time.
> Has anyone used this board and had this problem ?
> I don't see anything in BIOS to change this.
> It don't matter which hard drive I set in bios to boot first it only boots
> whatever is on SATA 0.
> Thanks
>
> --
> Carl G

Hi All
Got my problem sorted out.
Thanks for the response.
Thanks

--
Carl G

"Carl G" <cgerving@msnDOTcom> wrote in message
news:A8B4E587-31B2-4A4E-B9F6-FFFDEA778EF3@microsoft.com...
> Hi all
> I have just installed a new mobo. (Intel D945PVS)
> I have never had this problem before with intel board or other brands.
> I have Vista installed on SATA 0, Storage on SATA 1, XP on sata 2.
> On my other boards I could use the boot popup menue to chose my operating
> system.
> But on this board it will only boot to SATA 0.
> If I switch XP to SATA 0 it will boot XP only.
> I do not have dual boot setup.
> Each op system was installed on that HD,the only one connected at that
> time.
> Has anyone used this board and had this problem ?
> I don't see anything in BIOS to change this.
> It don't matter which hard drive I set in bios to boot first it only boots
> whatever is on SATA 0.
> Thanks
>
> --
> Carl G

Hi All
Got my problem sorted out.
Thanks for the response.
Thanks

--
Carl G

"Carl G" <cgerving@msnDOTcom> wrote in message
news:A8B4E587-31B2-4A4E-B9F6-FFFDEA778EF3@microsoft.com...
> Hi all
> I have just installed a new mobo. (Intel D945PVS)
> I have never had this problem before with intel board or other brands.
> I have Vista installed on SATA 0, Storage on SATA 1, XP on sata 2.
> On my other boards I could use the boot popup menue to chose my operating
> system.
> But on this board it will only boot to SATA 0.
> If I switch XP to SATA 0 it will boot XP only.
> I do not have dual boot setup.
> Each op system was installed on that HD,the only one connected at that
> time.
> Has anyone used this board and had this problem ?
> I don't see anything in BIOS to change this.
> It don't matter which hard drive I set in bios to boot first it only boots
> whatever is on SATA 0.
> Thanks
>
> --
> Carl G

Hi All
Got my problem sorted out.
Thanks for the response.
Thanks

--
Carl G

"Carl G" <cgerving@msnDOTcom> wrote in message
news:A8B4E587-31B2-4A4E-B9F6-FFFDEA778EF3@microsoft.com...
> Hi all
> I have just installed a new mobo. (Intel D945PVS)
> I have never had this problem before with intel board or other brands.
> I have Vista installed on SATA 0, Storage on SATA 1, XP on sata 2.
> On my other boards I could use the boot popup menue to chose my operating
> system.
> But on this board it will only boot to SATA 0.
> If I switch XP to SATA 0 it will boot XP only.
> I do not have dual boot setup.
> Each op system was installed on that HD,the only one connected at that
> time.
> Has anyone used this board and had this problem ?
> I don't see anything in BIOS to change this.
> It don't matter which hard drive I set in bios to boot first it only boots
> whatever is on SATA 0.
> Thanks
>
> --
> Carl G

Hi All
Got my problem sorted out.
Thanks for the response.
Thanks

--
Carl G

"Carl G" <cgerving@msnDOTcom> wrote in message
news:A8B4E587-31B2-4A4E-B9F6-FFFDEA778EF3@microsoft.com...
> Hi all
> I have just installed a new mobo. (Intel D945PVS)
> I have never had this problem before with intel board or other brands.
> I have Vista installed on SATA 0, Storage on SATA 1, XP on sata 2.
> On my other boards I could use the boot popup menue to chose my operating
> system.
> But on this board it will only boot to SATA 0.
> If I switch XP to SATA 0 it will boot XP only.
> I do not have dual boot setup.
> Each op system was installed on that HD,the only one connected at that
> time.
> Has anyone used this board and had this problem ?
> I don't see anything in BIOS to change this.
> It don't matter which hard drive I set in bios to boot first it only boots
> whatever is on SATA 0.
> Thanks
>
> --
> Carl G

Hi All
Got my problem sorted out.
Thanks for the response.
Thanks

--
Carl G

"Carl G" <cgerving@msnDOTcom> wrote in message
news:A8B4E587-31B2-4A4E-B9F6-FFFDEA778EF3@microsoft.com...
> Hi all
> I have just installed a new mobo. (Intel D945PVS)
> I have never had this problem before with intel board or other brands.
> I have Vista installed on SATA 0, Storage on SATA 1, XP on sata 2.
> On my other boards I could use the boot popup menue to chose my operating
> system.
> But on this board it will only boot to SATA 0.
> If I switch XP to SATA 0 it will boot XP only.
> I do not have dual boot setup.
> Each op system was installed on that HD,the only one connected at that
> time.
> Has anyone used this board and had this problem ?
> I don't see anything in BIOS to change this.
> It don't matter which hard drive I set in bios to boot first it only boots
> whatever is on SATA 0.
> Thanks
>
> --
> Carl G

Hi All
Got my problem sorted out.
Thanks for the response.
Thanks

--
Carl G

"Carl G" <cgerving@msnDOTcom> wrote in message
news:A8B4E587-31B2-4A4E-B9F6-FFFDEA778EF3@microsoft.com...
> Hi all
> I have just installed a new mobo. (Intel D945PVS)
> I have never had this problem before with intel board or other brands.
> I have Vista installed on SATA 0, Storage on SATA 1, XP on sata 2.
> On my other boards I could use the boot popup menue to chose my operating
> system.
> But on this board it will only boot to SATA 0.
> If I switch XP to SATA 0 it will boot XP only.
> I do not have dual boot setup.
> Each op system was installed on that HD,the only one connected at that
> time.
> Has anyone used this board and had this problem ?
> I don't see anything in BIOS to change this.
> It don't matter which hard drive I set in bios to boot first it only boots
> whatever is on SATA 0.
> Thanks
>
> --
> Carl G

Hi All
Got my problem sorted out.
Thanks for the response.
Thanks

--
Carl G

"Carl G" <cgerving@msnDOTcom> wrote in message
news:A8B4E587-31B2-4A4E-B9F6-FFFDEA778EF3@microsoft.com...
> Hi all
> I have just installed a new mobo. (Intel D945PVS)
> I have never had this problem before with intel board or other brands.
> I have Vista installed on SATA 0, Storage on SATA 1, XP on sata 2.
> On my other boards I could use the boot popup menue to chose my operating
> system.
> But on this board it will only boot to SATA 0.
> If I switch XP to SATA 0 it will boot XP only.
> I do not have dual boot setup.
> Each op system was installed on that HD,the only one connected at that
> time.
> Has anyone used this board and had this problem ?
> I don't see anything in BIOS to change this.
> It don't matter which hard drive I set in bios to boot first it only boots
> whatever is on SATA 0.
> Thanks
>
> --
> Carl G

Hi All
Got my problem sorted out.
Thanks for the response.
Thanks

--
Carl G

"Carl G" <cgerving@msnDOTcom> wrote in message
news:A8B4E587-31B2-4A4E-B9F6-FFFDEA778EF3@microsoft.com...
> Hi all
> I have just installed a new mobo. (Intel D945PVS)
> I have never had this problem before with intel board or other brands.
> I have Vista installed on SATA 0, Storage on SATA 1, XP on sata 2.
> On my other boards I could use the boot popup menue to chose my operating
> system.
> But on this board it will only boot to SATA 0.
> If I switch XP to SATA 0 it will boot XP only.
> I do not have dual boot setup.
> Each op system was installed on that HD,the only one connected at that
> time.
> Has anyone used this board and had this problem ?
> I don't see anything in BIOS to change this.
> It don't matter which hard drive I set in bios to boot first it only boots
> whatever is on SATA 0.
> Thanks
>
> --
> Carl G

Hi All
Got my problem sorted out.
Thanks for the response.
Thanks

--
Carl G

"Carl G" <cgerving@msnDOTcom> wrote in message
news:A8B4E587-31B2-4A4E-B9F6-FFFDEA778EF3@microsoft.com...
> Hi all
> I have just installed a new mobo. (Intel D945PVS)
> I have never had this problem before with intel board or other brands.
> I have Vista installed on SATA 0, Storage on SATA 1, XP on sata 2.
> On my other boards I could use the boot popup menue to chose my operating
> system.
> But on this board it will only boot to SATA 0.
> If I switch XP to SATA 0 it will boot XP only.
> I do not have dual boot setup.
> Each op system was installed on that HD,the only one connected at that
> time.
> Has anyone used this board and had this problem ?
> I don't see anything in BIOS to change this.
> It don't matter which hard drive I set in bios to boot first it only boots
> whatever is on SATA 0.
> Thanks
>
> --
> Carl G