Go Back   Technology Questions > Software Questions > Operating System Questions > Vista Community > Vista Hardware

Vista Hardware microsoft.public.windows.vista.hardware_devices

Reply
 
LinkBack Thread Tools
  #1 (permalink)  
Old 04-12-2007, 04:11 PM
gunzo99
Tablet PC Guest
 
Posts: n/a
Partition shrink: defrag + powercfg off = not working

Hello,

I have a toshiba laptop with vista. I did a first shrink on C: with good
results. But now, like others, I cant go further down. I downloaded
PerectDisk 8 and did several defrag (after reboot), removed temp files, used
with admin level the powercfg -h off command, my pagefile.sys is about 16Mb
(small than if turned off!).

All this and still impossible to shrink a 79Gb partition (C:)... My last
resort is acronis but I need to buy it and I would be fustrating to do this
just to get starting with this new laptop!

I see in the stats of PerfectDisk few blocks at the end of the partition
that are MFT and Metadata... The software can't tell me what files (path) are
associated with these few blocks... that are blocking further shrinking!

What can I do?

If I need Acronis, is the Free Trial version with this limitation still ok?
They say:
Only partitions of the minimum size (1 cylinder ~ 7,8 MBytes) can be created
(both in Windows and in rescue mode)

Thanks!

Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote

 
Old 04-12-2007, 04:11 PM
Xploder HD Movie Player for PS3. Manage, convert and transfer media files between the PC and PS3.
  #2 (permalink)  
Old 04-12-2007, 04:13 PM
Michal Kawecki
Tablet PC Guest
 
Posts: n/a
Re: Partition shrink: defrag + powercfg off = not working

Try BootIt Next Generation http://www.terabyteunlimited.com , it will
work 30 day without limitations. Don't install it on hdd, only run from
CD or fdd.
--
M. [Windows - Shell/User MVP]
/before private reply change px with pl in my e-mail address/

"gunzo99" <gunzo99@discussions.microsoft.com> wrote in message
news:F6D8132B-C187-42ED-921B-03BDABA54754@microsoft.com...
> Hello,
>
> I have a toshiba laptop with vista. I did a first shrink on C: with
> good
> results. But now, like others, I cant go further down. I downloaded
> PerectDisk 8 and did several defrag (after reboot), removed temp
> files, used
> with admin level the powercfg -h off command, my pagefile.sys is about
> 16Mb
> (small than if turned off!).
>
> All this and still impossible to shrink a 79Gb partition (C:)... My
> last
> resort is acronis but I need to buy it and I would be fustrating to do
> this
> just to get starting with this new laptop!
>
> I see in the stats of PerfectDisk few blocks at the end of the
> partition
> that are MFT and Metadata... The software can't tell me what files
> (path) are
> associated with these few blocks... that are blocking further
> shrinking!
>
> What can I do?
>
> If I need Acronis, is the Free Trial version with this limitation
> still ok?
> They say:
> Only partitions of the minimum size (1 cylinder ~ 7,8 MBytes) can be
> created
> (both in Windows and in rescue mode)
>
> Thanks!
>



Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote

  #3 (permalink)  
Old 04-12-2007, 04:13 PM
Michal Kawecki
Tablet PC Guest
 
Posts: n/a
Re: Partition shrink: defrag + powercfg off = not working

Try BootIt Next Generation http://www.terabyteunlimited.com , it will
work 30 day without limitations. Don't install it on hdd, only run from
CD or fdd.
--
M. [Windows - Shell/User MVP]
/before private reply change px with pl in my e-mail address/

"gunzo99" <gunzo99@discussions.microsoft.com> wrote in message
news:F6D8132B-C187-42ED-921B-03BDABA54754@microsoft.com...
> Hello,
>
> I have a toshiba laptop with vista. I did a first shrink on C: with
> good
> results. But now, like others, I cant go further down. I downloaded
> PerectDisk 8 and did several defrag (after reboot), removed temp
> files, used
> with admin level the powercfg -h off command, my pagefile.sys is about
> 16Mb
> (small than if turned off!).
>
> All this and still impossible to shrink a 79Gb partition (C:)... My
> last
> resort is acronis but I need to buy it and I would be fustrating to do
> this
> just to get starting with this new laptop!
>
> I see in the stats of PerfectDisk few blocks at the end of the
> partition
> that are MFT and Metadata... The software can't tell me what files
> (path) are
> associated with these few blocks... that are blocking further
> shrinking!
>
> What can I do?
>
> If I need Acronis, is the Free Trial version with this limitation
> still ok?
> They say:
> Only partitions of the minimum size (1 cylinder ~ 7,8 MBytes) can be
> created
> (both in Windows and in rescue mode)
>
> Thanks!
>



Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote

  #4 (permalink)  
Old 04-12-2007, 04:13 PM
Michal Kawecki
Tablet PC Guest
 
Posts: n/a
Re: Partition shrink: defrag + powercfg off = not working

Try BootIt Next Generation http://www.terabyteunlimited.com , it will
work 30 day without limitations. Don't install it on hdd, only run from
CD or fdd.
--
M. [Windows - Shell/User MVP]
/before private reply change px with pl in my e-mail address/

"gunzo99" <gunzo99@discussions.microsoft.com> wrote in message
news:F6D8132B-C187-42ED-921B-03BDABA54754@microsoft.com...
> Hello,
>
> I have a toshiba laptop with vista. I did a first shrink on C: with
> good
> results. But now, like others, I cant go further down. I downloaded
> PerectDisk 8 and did several defrag (after reboot), removed temp
> files, used
> with admin level the powercfg -h off command, my pagefile.sys is about
> 16Mb
> (small than if turned off!).
>
> All this and still impossible to shrink a 79Gb partition (C:)... My
> last
> resort is acronis but I need to buy it and I would be fustrating to do
> this
> just to get starting with this new laptop!
>
> I see in the stats of PerfectDisk few blocks at the end of the
> partition
> that are MFT and Metadata... The software can't tell me what files
> (path) are
> associated with these few blocks... that are blocking further
> shrinking!
>
> What can I do?
>
> If I need Acronis, is the Free Trial version with this limitation
> still ok?
> They say:
> Only partitions of the minimum size (1 cylinder ~ 7,8 MBytes) can be
> created
> (both in Windows and in rescue mode)
>
> Thanks!
>



Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote

  #5 (permalink)  
Old 04-12-2007, 04:13 PM
Michal Kawecki
Tablet PC Guest
 
Posts: n/a
Re: Partition shrink: defrag + powercfg off = not working

Try BootIt Next Generation http://www.terabyteunlimited.com , it will
work 30 day without limitations. Don't install it on hdd, only run from
CD or fdd.
--
M. [Windows - Shell/User MVP]
/before private reply change px with pl in my e-mail address/

"gunzo99" <gunzo99@discussions.microsoft.com> wrote in message
news:F6D8132B-C187-42ED-921B-03BDABA54754@microsoft.com...
> Hello,
>
> I have a toshiba laptop with vista. I did a first shrink on C: with
> good
> results. But now, like others, I cant go further down. I downloaded
> PerectDisk 8 and did several defrag (after reboot), removed temp
> files, used
> with admin level the powercfg -h off command, my pagefile.sys is about
> 16Mb
> (small than if turned off!).
>
> All this and still impossible to shrink a 79Gb partition (C:)... My
> last
> resort is acronis but I need to buy it and I would be fustrating to do
> this
> just to get starting with this new laptop!
>
> I see in the stats of PerfectDisk few blocks at the end of the
> partition
> that are MFT and Metadata... The software can't tell me what files
> (path) are
> associated with these few blocks... that are blocking further
> shrinking!
>
> What can I do?
>
> If I need Acronis, is the Free Trial version with this limitation
> still ok?
> They say:
> Only partitions of the minimum size (1 cylinder ~ 7,8 MBytes) can be
> created
> (both in Windows and in rescue mode)
>
> Thanks!
>



Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote

  #6 (permalink)  
Old 04-12-2007, 04:13 PM
Michal Kawecki
Tablet PC Guest
 
Posts: n/a
Re: Partition shrink: defrag + powercfg off = not working

Try BootIt Next Generation http://www.terabyteunlimited.com , it will
work 30 day without limitations. Don't install it on hdd, only run from
CD or fdd.
--
M. [Windows - Shell/User MVP]
/before private reply change px with pl in my e-mail address/

"gunzo99" <gunzo99@discussions.microsoft.com> wrote in message
news:F6D8132B-C187-42ED-921B-03BDABA54754@microsoft.com...
> Hello,
>
> I have a toshiba laptop with vista. I did a first shrink on C: with
> good
> results. But now, like others, I cant go further down. I downloaded
> PerectDisk 8 and did several defrag (after reboot), removed temp
> files, used
> with admin level the powercfg -h off command, my pagefile.sys is about
> 16Mb
> (small than if turned off!).
>
> All this and still impossible to shrink a 79Gb partition (C:)... My
> last
> resort is acronis but I need to buy it and I would be fustrating to do
> this
> just to get starting with this new laptop!
>
> I see in the stats of PerfectDisk few blocks at the end of the
> partition
> that are MFT and Metadata... The software can't tell me what files
> (path) are
> associated with these few blocks... that are blocking further
> shrinking!
>
> What can I do?
>
> If I need Acronis, is the Free Trial version with this limitation
> still ok?
> They say:
> Only partitions of the minimum size (1 cylinder ~ 7,8 MBytes) can be
> created
> (both in Windows and in rescue mode)
>
> Thanks!
>



Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote

  #7 (permalink)  
Old 04-12-2007, 04:13 PM
Michal Kawecki
Tablet PC Guest
 
Posts: n/a
Re: Partition shrink: defrag + powercfg off = not working

Try BootIt Next Generation http://www.terabyteunlimited.com , it will
work 30 day without limitations. Don't install it on hdd, only run from
CD or fdd.
--
M. [Windows - Shell/User MVP]
/before private reply change px with pl in my e-mail address/

"gunzo99" <gunzo99@discussions.microsoft.com> wrote in message
news:F6D8132B-C187-42ED-921B-03BDABA54754@microsoft.com...
> Hello,
>
> I have a toshiba laptop with vista. I did a first shrink on C: with
> good
> results. But now, like others, I cant go further down. I downloaded
> PerectDisk 8 and did several defrag (after reboot), removed temp
> files, used
> with admin level the powercfg -h off command, my pagefile.sys is about
> 16Mb
> (small than if turned off!).
>
> All this and still impossible to shrink a 79Gb partition (C:)... My
> last
> resort is acronis but I need to buy it and I would be fustrating to do
> this
> just to get starting with this new laptop!
>
> I see in the stats of PerfectDisk few blocks at the end of the
> partition
> that are MFT and Metadata... The software can't tell me what files
> (path) are
> associated with these few blocks... that are blocking further
> shrinking!
>
> What can I do?
>
> If I need Acronis, is the Free Trial version with this limitation
> still ok?
> They say:
> Only partitions of the minimum size (1 cylinder ~ 7,8 MBytes) can be
> created
> (both in Windows and in rescue mode)
>
> Thanks!
>



Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote

  #8 (permalink)  
Old 04-12-2007, 04:13 PM
Michal Kawecki
Tablet PC Guest
 
Posts: n/a
Re: Partition shrink: defrag + powercfg off = not working

Try BootIt Next Generation http://www.terabyteunlimited.com , it will
work 30 day without limitations. Don't install it on hdd, only run from
CD or fdd.
--
M. [Windows - Shell/User MVP]
/before private reply change px with pl in my e-mail address/

"gunzo99" <gunzo99@discussions.microsoft.com> wrote in message
news:F6D8132B-C187-42ED-921B-03BDABA54754@microsoft.com...
> Hello,
>
> I have a toshiba laptop with vista. I did a first shrink on C: with
> good
> results. But now, like others, I cant go further down. I downloaded
> PerectDisk 8 and did several defrag (after reboot), removed temp
> files, used
> with admin level the powercfg -h off command, my pagefile.sys is about
> 16Mb
> (small than if turned off!).
>
> All this and still impossible to shrink a 79Gb partition (C:)... My
> last
> resort is acronis but I need to buy it and I would be fustrating to do
> this
> just to get starting with this new laptop!
>
> I see in the stats of PerfectDisk few blocks at the end of the
> partition
> that are MFT and Metadata... The software can't tell me what files
> (path) are
> associated with these few blocks... that are blocking further
> shrinking!
>
> What can I do?
>
> If I need Acronis, is the Free Trial version with this limitation
> still ok?
> They say:
> Only partitions of the minimum size (1 cylinder ~ 7,8 MBytes) can be
> created
> (both in Windows and in rescue mode)
>
> Thanks!
>



Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote

  #9 (permalink)  
Old 04-12-2007, 04:13 PM
Michal Kawecki
Tablet PC Guest
 
Posts: n/a
Re: Partition shrink: defrag + powercfg off = not working

Try BootIt Next Generation http://www.terabyteunlimited.com , it will
work 30 day without limitations. Don't install it on hdd, only run from
CD or fdd.
--
M. [Windows - Shell/User MVP]
/before private reply change px with pl in my e-mail address/

"gunzo99" <gunzo99@discussions.microsoft.com> wrote in message
news:F6D8132B-C187-42ED-921B-03BDABA54754@microsoft.com...
> Hello,
>
> I have a toshiba laptop with vista. I did a first shrink on C: with
> good
> results. But now, like others, I cant go further down. I downloaded
> PerectDisk 8 and did several defrag (after reboot), removed temp
> files, used
> with admin level the powercfg -h off command, my pagefile.sys is about
> 16Mb
> (small than if turned off!).
>
> All this and still impossible to shrink a 79Gb partition (C:)... My
> last
> resort is acronis but I need to buy it and I would be fustrating to do
> this
> just to get starting with this new laptop!
>
> I see in the stats of PerfectDisk few blocks at the end of the
> partition
> that are MFT and Metadata... The software can't tell me what files
> (path) are
> associated with these few blocks... that are blocking further
> shrinking!
>
> What can I do?
>
> If I need Acronis, is the Free Trial version with this limitation
> still ok?
> They say:
> Only partitions of the minimum size (1 cylinder ~ 7,8 MBytes) can be
> created
> (both in Windows and in rescue mode)
>
> Thanks!
>



Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote

  #10 (permalink)  
Old 04-12-2007, 04:13 PM
Michal Kawecki
Tablet PC Guest
 
Posts: n/a
Re: Partition shrink: defrag + powercfg off = not working

Try BootIt Next Generation http://www.terabyteunlimited.com , it will
work 30 day without limitations. Don't install it on hdd, only run from
CD or fdd.
--
M. [Windows - Shell/User MVP]
/before private reply change px with pl in my e-mail address/

"gunzo99" <gunzo99@discussions.microsoft.com> wrote in message
news:F6D8132B-C187-42ED-921B-03BDABA54754@microsoft.com...
> Hello,
>
> I have a toshiba laptop with vista. I did a first shrink on C: with
> good
> results. But now, like others, I cant go further down. I downloaded
> PerectDisk 8 and did several defrag (after reboot), removed temp
> files, used
> with admin level the powercfg -h off command, my pagefile.sys is about
> 16Mb
> (small than if turned off!).
>
> All this and still impossible to shrink a 79Gb partition (C:)... My
> last
> resort is acronis but I need to buy it and I would be fustrating to do
> this
> just to get starting with this new laptop!
>
> I see in the stats of PerfectDisk few blocks at the end of the
> partition
> that are MFT and Metadata... The software can't tell me what files
> (path) are
> associated with these few blocks... that are blocking further
> shrinking!
>
> What can I do?
>
> If I need Acronis, is the Free Trial version with this limitation
> still ok?
> They say:
> Only partitions of the minimum size (1 cylinder ~ 7,8 MBytes) can be
> created
> (both in Windows and in rescue mode)
>
> Thanks!
>



Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote

  #11 (permalink)  
Old 04-12-2007, 04:13 PM
Michal Kawecki
Tablet PC Guest
 
Posts: n/a
Re: Partition shrink: defrag + powercfg off = not working

Try BootIt Next Generation http://www.terabyteunlimited.com , it will
work 30 day without limitations. Don't install it on hdd, only run from
CD or fdd.
--
M. [Windows - Shell/User MVP]
/before private reply change px with pl in my e-mail address/

"gunzo99" <gunzo99@discussions.microsoft.com> wrote in message
news:F6D8132B-C187-42ED-921B-03BDABA54754@microsoft.com...
> Hello,
>
> I have a toshiba laptop with vista. I did a first shrink on C: with
> good
> results. But now, like others, I cant go further down. I downloaded
> PerectDisk 8 and did several defrag (after reboot), removed temp
> files, used
> with admin level the powercfg -h off command, my pagefile.sys is about
> 16Mb
> (small than if turned off!).
>
> All this and still impossible to shrink a 79Gb partition (C:)... My
> last
> resort is acronis but I need to buy it and I would be fustrating to do
> this
> just to get starting with this new laptop!
>
> I see in the stats of PerfectDisk few blocks at the end of the
> partition
> that are MFT and Metadata... The software can't tell me what files
> (path) are
> associated with these few blocks... that are blocking further
> shrinking!
>
> What can I do?
>
> If I need Acronis, is the Free Trial version with this limitation
> still ok?
> They say:
> Only partitions of the minimum size (1 cylinder ~ 7,8 MBytes) can be
> created
> (both in Windows and in rescue mode)
>
> Thanks!
>



Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote

  #12 (permalink)  
Old 04-12-2007, 04:13 PM
Michal Kawecki
Tablet PC Guest
 
Posts: n/a
Re: Partition shrink: defrag + powercfg off = not working

Try BootIt Next Generation http://www.terabyteunlimited.com , it will
work 30 day without limitations. Don't install it on hdd, only run from
CD or fdd.
--
M. [Windows - Shell/User MVP]
/before private reply change px with pl in my e-mail address/

"gunzo99" <gunzo99@discussions.microsoft.com> wrote in message
news:F6D8132B-C187-42ED-921B-03BDABA54754@microsoft.com...
> Hello,
>
> I have a toshiba laptop with vista. I did a first shrink on C: with
> good
> results. But now, like others, I cant go further down. I downloaded
> PerectDisk 8 and did several defrag (after reboot), removed temp
> files, used
> with admin level the powercfg -h off command, my pagefile.sys is about
> 16Mb
> (small than if turned off!).
>
> All this and still impossible to shrink a 79Gb partition (C:)... My
> last
> resort is acronis but I need to buy it and I would be fustrating to do
> this
> just to get starting with this new laptop!
>
> I see in the stats of PerfectDisk few blocks at the end of the
> partition
> that are MFT and Metadata... The software can't tell me what files
> (path) are
> associated with these few blocks... that are blocking further
> shrinking!
>
> What can I do?
>
> If I need Acronis, is the Free Trial version with this limitation
> still ok?
> They say:
> Only partitions of the minimum size (1 cylinder ~ 7,8 MBytes) can be
> created
> (both in Windows and in rescue mode)
>
> Thanks!
>



Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote

  #13 (permalink)  
Old 04-12-2007, 04:13 PM
Michal Kawecki
Tablet PC Guest
 
Posts: n/a
Re: Partition shrink: defrag + powercfg off = not working

Try BootIt Next Generation http://www.terabyteunlimited.com , it will
work 30 day without limitations. Don't install it on hdd, only run from
CD or fdd.
--
M. [Windows - Shell/User MVP]
/before private reply change px with pl in my e-mail address/

"gunzo99" <gunzo99@discussions.microsoft.com> wrote in message
news:F6D8132B-C187-42ED-921B-03BDABA54754@microsoft.com...
> Hello,
>
> I have a toshiba laptop with vista. I did a first shrink on C: with
> good
> results. But now, like others, I cant go further down. I downloaded
> PerectDisk 8 and did several defrag (after reboot), removed temp
> files, used
> with admin level the powercfg -h off command, my pagefile.sys is about
> 16Mb
> (small than if turned off!).
>
> All this and still impossible to shrink a 79Gb partition (C:)... My
> last
> resort is acronis but I need to buy it and I would be fustrating to do
> this
> just to get starting with this new laptop!
>
> I see in the stats of PerfectDisk few blocks at the end of the
> partition
> that are MFT and Metadata... The software can't tell me what files
> (path) are
> associated with these few blocks... that are blocking further
> shrinking!
>
> What can I do?
>
> If I need Acronis, is the Free Trial version with this limitation
> still ok?
> They say:
> Only partitions of the minimum size (1 cylinder ~ 7,8 MBytes) can be
> created
> (both in Windows and in rescue mode)
>
> Thanks!
>



Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote

  #14 (permalink)  
Old 04-12-2007, 04:13 PM
Michal Kawecki
Tablet PC Guest
 
Posts: n/a
Re: Partition shrink: defrag + powercfg off = not working

Try BootIt Next Generation http://www.terabyteunlimited.com , it will
work 30 day without limitations. Don't install it on hdd, only run from
CD or fdd.
--
M. [Windows - Shell/User MVP]
/before private reply change px with pl in my e-mail address/

"gunzo99" <gunzo99@discussions.microsoft.com> wrote in message
news:F6D8132B-C187-42ED-921B-03BDABA54754@microsoft.com...
> Hello,
>
> I have a toshiba laptop with vista. I did a first shrink on C: with
> good
> results. But now, like others, I cant go further down. I downloaded
> PerectDisk 8 and did several defrag (after reboot), removed temp
> files, used
> with admin level the powercfg -h off command, my pagefile.sys is about
> 16Mb
> (small than if turned off!).
>
> All this and still impossible to shrink a 79Gb partition (C:)... My
> last
> resort is acronis but I need to buy it and I would be fustrating to do
> this
> just to get starting with this new laptop!
>
> I see in the stats of PerfectDisk few blocks at the end of the
> partition
> that are MFT and Metadata... The software can't tell me what files
> (path) are
> associated with these few blocks... that are blocking further
> shrinking!
>
> What can I do?
>
> If I need Acronis, is the Free Trial version with this limitation
> still ok?
> They say:
> Only partitions of the minimum size (1 cylinder ~ 7,8 MBytes) can be
> created
> (both in Windows and in rescue mode)
>
> Thanks!
>



Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote

  #15 (permalink)  
Old 04-12-2007, 04:13 PM
Michal Kawecki
Tablet PC Guest
 
Posts: n/a
Re: Partition shrink: defrag + powercfg off = not working

Try BootIt Next Generation http://www.terabyteunlimited.com , it will
work 30 day without limitations. Don't install it on hdd, only run from
CD or fdd.
--
M. [Windows - Shell/User MVP]
/before private reply change px with pl in my e-mail address/

"gunzo99" <gunzo99@discussions.microsoft.com> wrote in message
news:F6D8132B-C187-42ED-921B-03BDABA54754@microsoft.com...
> Hello,
>
> I have a toshiba laptop with vista. I did a first shrink on C: with
> good
> results. But now, like others, I cant go further down. I downloaded
> PerectDisk 8 and did several defrag (after reboot), removed temp
> files, used
> with admin level the powercfg -h off command, my pagefile.sys is about
> 16Mb
> (small than if turned off!).
>
> All this and still impossible to shrink a 79Gb partition (C:)... My
> last
> resort is acronis but I need to buy it and I would be fustrating to do
> this
> just to get starting with this new laptop!
>
> I see in the stats of PerfectDisk few blocks at the end of the
> partition
> that are MFT and Metadata... The software can't tell me what files
> (path) are
> associated with these few blocks... that are blocking further
> shrinking!
>
> What can I do?
>
> If I need Acronis, is the Free Trial version with this limitation
> still ok?
> They say:
> Only partitions of the minimum size (1 cylinder ~ 7,8 MBytes) can be
> created
> (both in Windows and in rescue mode)
>
> Thanks!
>



Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote

Reply

Bookmarks

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Disk Manager not allowing me to shrink partition... TheMadPoster Windows Vista 9 07-09-2008 09:20 PM
Re: V64 Ultimate Powercfg.exe Shut Down Problem mikeyhsd Windows Vista 0 04-01-2007 04:45 AM
disk defrag not working. Instead, it's doin a chkdsk on F: drive Douroth Windows XP 2 01-04-2007 05:56 AM
MS Defrag stopped working, help! MrBill Windows XP 3 01-04-2007 01:53 AM
Defrag partition PowerUser Windows Vista 1 01-01-2007 09:26 PM


All times are GMT -8. The time now is 04:28 AM.


2003 - 2008 All Rights Reserved. Technology Questions

SEO by vBSEO 3.1.0