[url]http://www.promise.com/product/product_detail.asp?product_id=191[/url]

Get the new BIOS update is it is not already installed, get the
[url]http://www.promise.com/upload/Support/Driver/FTTX4650-2650%20Windrv-WHQL%20V1.2.0.59.zip[/url]
file. It should install on Vista 64. This is its txtsetup.oem file which
is included in the package.

[Disks]
disk0 = "Promise FastTrak TX4650/2650 Driver Diskette", \FTT3, \
disk1 = "Promise FastTrak TX4650/2650 Driver Diskette", \FTT3, \i386
disk2 = "Promise FastTrak TX4650/2650 Driver Diskette", \FTT3, \amd64

[Defaults]
SCSI = Napa_i386_FTT3

[SCSI]
Napa_i386_FTT3 = "Promise FastTrak TX4650/2650 Controller-x86 platform",
FTT3
Napa_amd64_FTT3 = "Promise FastTrak TX4650/2650 Controller-x64
platform", FTT3

[Files.SCSI.Napa_i386_FTT3]
inf = disk1, FTT3.inf
driver = disk1, FTT3.sys, FTT3
catalog = disk1, FTT3.cat

[Files.SCSI.Napa_amd64_FTT3]
inf = disk2, FTT3.inf
driver = disk2, FTT3.sys, FTT3
catalog = disk2, FTT3.cat

[HardwareIds.SCSI.Napa_i386_FTT3]
id = "PCI\VEN_105A&DEV_3775", "FTT3"
id = "PCI\VEN_105A&DEV_3776", "FTT3"
id = "PCI\VEN_105A&DEV_3777", "FTT3"
id = "PCI\VEN_105A&DEV_3778", "FTT3"
id = "PCI\VEN_105A&DEV_3F17", "FTT3"
id = "PCI\VEN_105A&DEV_3F18", "FTT3"
id = "PCI\VEN_105A&DEV_3F19", "FTT3"
id = "PCI\VEN_105A&DEV_3F20", "FTT3"

[HardwareIds.SCSI.Napa_amd64_FTT3]
id = "PCI\VEN_105A&DEV_3775", "FTT3"
id = "PCI\VEN_105A&DEV_3776", "FTT3"
id = "PCI\VEN_105A&DEV_3777", "FTT3"
id = "PCI\VEN_105A&DEV_3778", "FTT3"
id = "PCI\VEN_105A&DEV_3F17", "FTT3"
id = "PCI\VEN_105A&DEV_3F18", "FTT3"
id = "PCI\VEN_105A&DEV_3F19", "FTT3"
id = "PCI\VEN_105A&DEV_3F20", "FTT3"

[Config.FTT3]
value = "", Tag, REG_DWORD, 1

If windows is already set up on a drive not on the controller, install
through "device manager".

Also, the driver files can be copied to a floppy or usb stick and used for
installation during Windows setup.

Good luck.

Tom Ferguson



"3BABY" <guest@unknown-email.com> wrote in message
news:4680a15b50f641b79cb08af1f3a8662c@nntp-gateway.com...[color=blue]
>
> Hey Guys and Girls
>
> im trying to install Vista x64 on an array using a Promise TX4650.. but
> the drivers from their website dont seem to work, the 2K8 driver doesn't
> work, im starting to think they dont have a x64 driver out, can anyone
> confirm or does anyone know how where the driver for this controller is
> with vista x64?
>
> thanks in advance.
>
>
> --
> 3BABY[/color]