I recently installed Vista x64 in a dual boot config with XP Pro. A couple of
days ago, I turned on my computer and booted into Vista. I then noticed that,
suddenly, both of my DVD optical drives stopped working (one external USB,
and one internal). They were working fine for the first week and I cannot
think of any changes that I made that may have caused this inconvienence. I
went into device manager and it said that the drivers were disabled - code
32. Please Help!! I do not know much at all about Vista and really need my
drives to work!! -- Jonny

I use my computer for audio recording and changes some settings in the
firewall, updates, and power management, but that was a few days before. I
cannot recall changing anything else, especially dealing with USB or IDE. I
have tried uninstalling in device manager and reinstalling and rebooting.
When I try reinstalling, it stops in the middle of installation and says
drivers cannot be installed. As I stated before, it says device drivers were
disabled (code 32) in device manager properties. Thanks for your help.

"SCSIraidGURU" wrote:
[color=blue]
>
> What did you change? Did you disable the USB and internal interface?
> Try unplugging them. Boot Vista and removing them. Shutdown.
> Reconnect. Reinstall them in Vista.
>
>
> --
> SCSIraidGURU
>
> Michael A. McKenney
> 'www.SCSIraidGURU.com' ([url]http://www.SCSIraidGURU.com[/url])
>
> Supermicro X7DWA-N server board
> pair of Intel E5430 quad core 2.66 GHz Xeons
> 16GB DDR667
> SAS RAID
> eVGA 8800 GTS 640 MB video card
>[/color]

[url]http://support.microsoft.com/kb/314060/nl[/url]

Above is the link from MS for code 32,e
--
Mick Murphy - Qld - Australia


"jonnycakes15" wrote:
[color=blue]
> I use my computer for audio recording and changes some settings in the
> firewall, updates, and power management, but that was a few days before. I
> cannot recall changing anything else, especially dealing with USB or IDE. I
> have tried uninstalling in device manager and reinstalling and rebooting.
> When I try reinstalling, it stops in the middle of installation and says
> drivers cannot be installed. As I stated before, it says device drivers were
> disabled (code 32) in device manager properties. Thanks for your help.
>
> "SCSIraidGURU" wrote:
>[color=green]
> >
> > What did you change? Did you disable the USB and internal interface?
> > Try unplugging them. Boot Vista and removing them. Shutdown.
> > Reconnect. Reinstall them in Vista.
> >
> >
> > --
> > SCSIraidGURU
> >
> > Michael A. McKenney
> > 'www.SCSIraidGURU.com' ([url]http://www.SCSIraidGURU.com[/url])
> >
> > Supermicro X7DWA-N server board
> > pair of Intel E5430 quad core 2.66 GHz Xeons
> > 16GB DDR667
> > SAS RAID
> > eVGA 8800 GTS 640 MB video card
> >[/color][/color]