Seems that the install process goes through fine, but I am not able to create
new C# projects. It says the project file "csproj" is missing, or something
like that. I can--however--create C++ prjects. You go figure....

Just to test the installtion package, I installed on a regular "clean" type
PC workstation. The installation went fine and I could create new C#
projects.

Am I missing something for TablePC install. Are there any special .NET
components that must be installed in order to develop in C#?

Thanks,

Larry

This is pre-coffee, but do you have .NET 1.1 installed? You can check in
Add or Remove Programs, where you should find a listing of "Microsoft .NET
Framework 1.1". If it isn't exactly that, you don't have the current
version. Additionally, there is Microsoft .NET Framework 1.1 Hoftix
(KB886903), which you need.
--
http://www.microsoft.com/windowsxp/e...ts/nichol.mspx
In memory of a true friend, Windows MVP Alex Nichol

Chris H.
Microsoft Windows MVP/Tablet PC
Tablet Creations - http://nicecreations.us/
Associate Expert
Expert Zone - www.microsoft.com/windowsxp/expertzone


"Lar-Man" <Lar-Man@discussions.microsoft.com> wrote in message
news:8EE74ACE-53B5-47EF-A135-523EA0AEAA12@microsoft.com...
> Seems that the install process goes through fine, but I am not able to
> create
> new C# projects. It says the project file "csproj" is missing, or
> something
> like that. I can--however--create C++ prjects. You go figure....
>
> Just to test the installtion package, I installed on a regular "clean"
> type
> PC workstation. The installation went fine and I could create new C#
> projects.
>
> Am I missing something for TablePC install. Are there any special .NET
> components that must be installed in order to develop in C#?
>
> Thanks,
>
> Larry

"Lar-Man" wrote:

> Seems that the install process goes through fine, but I am not able to create
> new C# projects. It says the project file "csproj" is missing, or something
> like that. I can--however--create C++ prjects. You go figure....
>
> Just to test the installtion package, I installed on a regular "clean" type
> PC workstation. The installation went fine and I could create new C#
> projects.
>
> Am I missing something for TablePC install. Are there any special .NET
> components that must be installed in order to develop in C#?
>
> Thanks,
>
> Larry

I do already have Framework 1.1 installed, as well as the hotfix package.

"Chris H." wrote:

> This is pre-coffee, but do you have .NET 1.1 installed? You can check in
> Add or Remove Programs, where you should find a listing of "Microsoft .NET
> Framework 1.1". If it isn't exactly that, you don't have the current
> version. Additionally, there is Microsoft .NET Framework 1.1 Hoftix
> (KB886903), which you need.
> --
> http://www.microsoft.com/windowsxp/e...ts/nichol.mspx
> In memory of a true friend, Windows MVP Alex Nichol
>
> Chris H.
> Microsoft Windows MVP/Tablet PC
> Tablet Creations - http://nicecreations.us/
> Associate Expert
> Expert Zone - www.microsoft.com/windowsxp/expertzone
>
>
> "Lar-Man" <Lar-Man@discussions.microsoft.com> wrote in message
> news:8EE74ACE-53B5-47EF-A135-523EA0AEAA12@microsoft.com...
> > Seems that the install process goes through fine, but I am not able to
> > create
> > new C# projects. It says the project file "csproj" is missing, or
> > something
> > like that. I can--however--create C++ prjects. You go figure....
> >
> > Just to test the installtion package, I installed on a regular "clean"
> > type
> > PC workstation. The installation went fine and I could create new C#
> > projects.
> >
> > Am I missing something for TablePC install. Are there any special .NET
> > components that must be installed in order to develop in C#?
> >
> > Thanks,
> >
> > Larry
>
>
>

That's good. Make sure your AV program is totally shut down, and all other
normal programs are closed before attempting the installation. If you're
running Norton (Symantec) they don't shut down from the Systray icon, only
"exit" that icon.
--
http://www.microsoft.com/windowsxp/e...ts/nichol.mspx
In memory of a true friend, Windows MVP Alex Nichol

Chris H.
Microsoft Windows MVP/Tablet PC
Tablet Creations - http://nicecreations.us/
Associate Expert
Expert Zone - www.microsoft.com/windowsxp/expertzone


"Lar-Man" <LarMan@discussions.microsoft.com> wrote in message
news:BF242D5A-1680-4405-BBC9-A3FE0DD03610@microsoft.com...
>I do already have Framework 1.1 installed, as well as the hotfix package.
>
> "Chris H." wrote:
>
>> This is pre-coffee, but do you have .NET 1.1 installed? You can check in
>> Add or Remove Programs, where you should find a listing of "Microsoft
>> .NET
>> Framework 1.1". If it isn't exactly that, you don't have the current
>> version. Additionally, there is Microsoft .NET Framework 1.1 Hoftix
>> (KB886903), which you need.
>> --
>> http://www.microsoft.com/windowsxp/e...ts/nichol.mspx
>> In memory of a true friend, Windows MVP Alex Nichol
>>
>> Chris H.
>> Microsoft Windows MVP/Tablet PC
>> Tablet Creations - http://nicecreations.us/
>> Associate Expert
>> Expert Zone - www.microsoft.com/windowsxp/expertzone
>>
>>
>> "Lar-Man" <Lar-Man@discussions.microsoft.com> wrote in message
>> news:8EE74ACE-53B5-47EF-A135-523EA0AEAA12@microsoft.com...
>> > Seems that the install process goes through fine, but I am not able to
>> > create
>> > new C# projects. It says the project file "csproj" is missing, or
>> > something
>> > like that. I can--however--create C++ prjects. You go figure....
>> >
>> > Just to test the installtion package, I installed on a regular "clean"
>> > type
>> > PC workstation. The installation went fine and I could create new C#
>> > projects.
>> >
>> > Am I missing something for TablePC install. Are there any special .NET
>> > components that must be installed in order to develop in C#?
>> >
>> > Thanks,
>> >
>> > Larry
>>
>>
>>

Will try. Thanks a million. Will let you know either way. Larry

"Chris H." wrote:

> That's good. Make sure your AV program is totally shut down, and all other
> normal programs are closed before attempting the installation. If you're
> running Norton (Symantec) they don't shut down from the Systray icon, only
> "exit" that icon.
> --
> http://www.microsoft.com/windowsxp/e...ts/nichol.mspx
> In memory of a true friend, Windows MVP Alex Nichol
>
> Chris H.
> Microsoft Windows MVP/Tablet PC
> Tablet Creations - http://nicecreations.us/
> Associate Expert
> Expert Zone - www.microsoft.com/windowsxp/expertzone
>
>
> "Lar-Man" <LarMan@discussions.microsoft.com> wrote in message
> news:BF242D5A-1680-4405-BBC9-A3FE0DD03610@microsoft.com...
> >I do already have Framework 1.1 installed, as well as the hotfix package.
> >
> > "Chris H." wrote:
> >
> >> This is pre-coffee, but do you have .NET 1.1 installed? You can check in
> >> Add or Remove Programs, where you should find a listing of "Microsoft
> >> .NET
> >> Framework 1.1". If it isn't exactly that, you don't have the current
> >> version. Additionally, there is Microsoft .NET Framework 1.1 Hoftix
> >> (KB886903), which you need.
> >> --
> >> http://www.microsoft.com/windowsxp/e...ts/nichol.mspx
> >> In memory of a true friend, Windows MVP Alex Nichol
> >>
> >> Chris H.
> >> Microsoft Windows MVP/Tablet PC
> >> Tablet Creations - http://nicecreations.us/
> >> Associate Expert
> >> Expert Zone - www.microsoft.com/windowsxp/expertzone
> >>
> >>
> >> "Lar-Man" <Lar-Man@discussions.microsoft.com> wrote in message
> >> news:8EE74ACE-53B5-47EF-A135-523EA0AEAA12@microsoft.com...
> >> > Seems that the install process goes through fine, but I am not able to
> >> > create
> >> > new C# projects. It says the project file "csproj" is missing, or
> >> > something
> >> > like that. I can--however--create C++ prjects. You go figure....
> >> >
> >> > Just to test the installtion package, I installed on a regular "clean"
> >> > type
> >> > PC workstation. The installation went fine and I could create new C#
> >> > projects.
> >> >
> >> > Am I missing something for TablePC install. Are there any special .NET
> >> > components that must be installed in order to develop in C#?
> >> >
> >> > Thanks,
> >> >
> >> > Larry
> >>
> >>
> >>
>
>
>

Hope it works, Larry. If not, we'll dig around for something else.
--
http://www.microsoft.com/windowsxp/e...ts/nichol.mspx
In memory of a true friend, Windows MVP Alex Nichol

Chris H.
Microsoft Windows MVP/Tablet PC
Tablet Creations - http://nicecreations.us/
Associate Expert
Expert Zone - www.microsoft.com/windowsxp/expertzone


"Lar-Man" <LarMan@discussions.microsoft.com> wrote in message
news:A636C8C1-5B5D-4174-A5EB-4481EBB1AA09@microsoft.com...
> Will try. Thanks a million. Will let you know either way. Larry
>
> "Chris H." wrote:
>
>> That's good. Make sure your AV program is totally shut down, and all
>> other
>> normal programs are closed before attempting the installation. If you're
>> running Norton (Symantec) they don't shut down from the Systray icon,
>> only
>> "exit" that icon.
>> --
>> http://www.microsoft.com/windowsxp/e...ts/nichol.mspx
>> In memory of a true friend, Windows MVP Alex Nichol
>>
>> Chris H.
>> Microsoft Windows MVP/Tablet PC
>> Tablet Creations - http://nicecreations.us/
>> Associate Expert
>> Expert Zone - www.microsoft.com/windowsxp/expertzone
>>
>>
>> "Lar-Man" <LarMan@discussions.microsoft.com> wrote in message
>> news:BF242D5A-1680-4405-BBC9-A3FE0DD03610@microsoft.com...
>> >I do already have Framework 1.1 installed, as well as the hotfix
>> >package.
>> >
>> > "Chris H." wrote:
>> >
>> >> This is pre-coffee, but do you have .NET 1.1 installed? You can check
>> >> in
>> >> Add or Remove Programs, where you should find a listing of "Microsoft
>> >> .NET
>> >> Framework 1.1". If it isn't exactly that, you don't have the current
>> >> version. Additionally, there is Microsoft .NET Framework 1.1 Hoftix
>> >> (KB886903), which you need.
>> >> --
>> >> http://www.microsoft.com/windowsxp/e...ts/nichol.mspx
>> >> In memory of a true friend, Windows MVP Alex Nichol
>> >>
>> >> Chris H.
>> >> Microsoft Windows MVP/Tablet PC
>> >> Tablet Creations - http://nicecreations.us/
>> >> Associate Expert
>> >> Expert Zone - www.microsoft.com/windowsxp/expertzone
>> >>
>> >>
>> >> "Lar-Man" <Lar-Man@discussions.microsoft.com> wrote in message
>> >> news:8EE74ACE-53B5-47EF-A135-523EA0AEAA12@microsoft.com...
>> >> > Seems that the install process goes through fine, but I am not able
>> >> > to
>> >> > create
>> >> > new C# projects. It says the project file "csproj" is missing, or
>> >> > something
>> >> > like that. I can--however--create C++ prjects. You go figure....
>> >> >
>> >> > Just to test the installtion package, I installed on a regular
>> >> > "clean"
>> >> > type
>> >> > PC workstation. The installation went fine and I could create new
>> >> > C#
>> >> > projects.
>> >> >
>> >> > Am I missing something for TablePC install. Are there any special
>> >> > .NET
>> >> > components that must be installed in order to develop in C#?
>> >> >
>> >> > Thanks,
>> >> >
>> >> > Larry
>> >>
>> >>
>> >>
>>
>>
>>

Chris hi, I did silence my AV and did the install--but am am having the same
problem--but I can tell you exactly what the Microsoft Development
Environment Message Box says, as follows:
---------------------------------------------------------------------------------
"The application for project 'c:\Program Files\Microsoft Visual Studio .NET
2003\VC#\#Wizards\DefaultWinExe.csproj' is not installed.

Make sure the application for the project type (.csproj) is installed."
------------------------------------------------------------------------------------
Chris, hopefully that gives you a better clue. As before, I cannot create a
C# project.

And again, many thanks for your hanging in there. Your help is being very
appreciated.

Larry


"Chris H." wrote:

> Hope it works, Larry. If not, we'll dig around for something else.
> --
> http://www.microsoft.com/windowsxp/e...ts/nichol.mspx
> In memory of a true friend, Windows MVP Alex Nichol
>
> Chris H.
> Microsoft Windows MVP/Tablet PC
> Tablet Creations - http://nicecreations.us/
> Associate Expert
> Expert Zone - www.microsoft.com/windowsxp/expertzone
>
>
> "Lar-Man" <LarMan@discussions.microsoft.com> wrote in message
> news:A636C8C1-5B5D-4174-A5EB-4481EBB1AA09@microsoft.com...
> > Will try. Thanks a million. Will let you know either way. Larry
> >
> > "Chris H." wrote:
> >
> >> That's good. Make sure your AV program is totally shut down, and all
> >> other
> >> normal programs are closed before attempting the installation. If you're
> >> running Norton (Symantec) they don't shut down from the Systray icon,
> >> only
> >> "exit" that icon.
> >> --
> >> http://www.microsoft.com/windowsxp/e...ts/nichol.mspx
> >> In memory of a true friend, Windows MVP Alex Nichol
> >>
> >> Chris H.
> >> Microsoft Windows MVP/Tablet PC
> >> Tablet Creations - http://nicecreations.us/
> >> Associate Expert
> >> Expert Zone - www.microsoft.com/windowsxp/expertzone
> >>
> >>
> >> "Lar-Man" <LarMan@discussions.microsoft.com> wrote in message
> >> news:BF242D5A-1680-4405-BBC9-A3FE0DD03610@microsoft.com...
> >> >I do already have Framework 1.1 installed, as well as the hotfix
> >> >package.
> >> >
> >> > "Chris H." wrote:
> >> >
> >> >> This is pre-coffee, but do you have .NET 1.1 installed? You can check
> >> >> in
> >> >> Add or Remove Programs, where you should find a listing of "Microsoft
> >> >> .NET
> >> >> Framework 1.1". If it isn't exactly that, you don't have the current
> >> >> version. Additionally, there is Microsoft .NET Framework 1.1 Hoftix
> >> >> (KB886903), which you need.
> >> >> --
> >> >> http://www.microsoft.com/windowsxp/e...ts/nichol.mspx
> >> >> In memory of a true friend, Windows MVP Alex Nichol
> >> >>
> >> >> Chris H.
> >> >> Microsoft Windows MVP/Tablet PC
> >> >> Tablet Creations - http://nicecreations.us/
> >> >> Associate Expert
> >> >> Expert Zone - www.microsoft.com/windowsxp/expertzone
> >> >>
> >> >>
> >> >> "Lar-Man" <Lar-Man@discussions.microsoft.com> wrote in message
> >> >> news:8EE74ACE-53B5-47EF-A135-523EA0AEAA12@microsoft.com...
> >> >> > Seems that the install process goes through fine, but I am not able
> >> >> > to
> >> >> > create
> >> >> > new C# projects. It says the project file "csproj" is missing, or
> >> >> > something
> >> >> > like that. I can--however--create C++ prjects. You go figure....
> >> >> >
> >> >> > Just to test the installtion package, I installed on a regular
> >> >> > "clean"
> >> >> > type
> >> >> > PC workstation. The installation went fine and I could create new
> >> >> > C#
> >> >> > projects.
> >> >> >
> >> >> > Am I missing something for TablePC install. Are there any special
> >> >> > .NET
> >> >> > components that must be installed in order to develop in C#?
> >> >> >
> >> >> > Thanks,
> >> >> >
> >> >> > Larry
> >> >>
> >> >>
> >> >>
> >>
> >>
> >>
>
>
>

Chris, I am also noting as before that I can create C++ projects (MFC
Application), Setup and Deployment Projects--no problem, but still having a
problem with C#, VB and J# projects.

"Chris H." wrote:

> Hope it works, Larry. If not, we'll dig around for something else.
> --
> http://www.microsoft.com/windowsxp/e...ts/nichol.mspx
> In memory of a true friend, Windows MVP Alex Nichol
>
> Chris H.
> Microsoft Windows MVP/Tablet PC
> Tablet Creations - http://nicecreations.us/
> Associate Expert
> Expert Zone - www.microsoft.com/windowsxp/expertzone
>
>
> "Lar-Man" <LarMan@discussions.microsoft.com> wrote in message
> news:A636C8C1-5B5D-4174-A5EB-4481EBB1AA09@microsoft.com...
> > Will try. Thanks a million. Will let you know either way. Larry
> >
> > "Chris H." wrote:
> >
> >> That's good. Make sure your AV program is totally shut down, and all
> >> other
> >> normal programs are closed before attempting the installation. If you're
> >> running Norton (Symantec) they don't shut down from the Systray icon,
> >> only
> >> "exit" that icon.
> >> --
> >> http://www.microsoft.com/windowsxp/e...ts/nichol.mspx
> >> In memory of a true friend, Windows MVP Alex Nichol
> >>
> >> Chris H.
> >> Microsoft Windows MVP/Tablet PC
> >> Tablet Creations - http://nicecreations.us/
> >> Associate Expert
> >> Expert Zone - www.microsoft.com/windowsxp/expertzone
> >>
> >>
> >> "Lar-Man" <LarMan@discussions.microsoft.com> wrote in message
> >> news:BF242D5A-1680-4405-BBC9-A3FE0DD03610@microsoft.com...
> >> >I do already have Framework 1.1 installed, as well as the hotfix
> >> >package.
> >> >
> >> > "Chris H." wrote:
> >> >
> >> >> This is pre-coffee, but do you have .NET 1.1 installed? You can check
> >> >> in
> >> >> Add or Remove Programs, where you should find a listing of "Microsoft
> >> >> .NET
> >> >> Framework 1.1". If it isn't exactly that, you don't have the current
> >> >> version. Additionally, there is Microsoft .NET Framework 1.1 Hoftix
> >> >> (KB886903), which you need.
> >> >> --
> >> >> http://www.microsoft.com/windowsxp/e...ts/nichol.mspx
> >> >> In memory of a true friend, Windows MVP Alex Nichol
> >> >>
> >> >> Chris H.
> >> >> Microsoft Windows MVP/Tablet PC
> >> >> Tablet Creations - http://nicecreations.us/
> >> >> Associate Expert
> >> >> Expert Zone - www.microsoft.com/windowsxp/expertzone
> >> >>
> >> >>
> >> >> "Lar-Man" <Lar-Man@discussions.microsoft.com> wrote in message
> >> >> news:8EE74ACE-53B5-47EF-A135-523EA0AEAA12@microsoft.com...
> >> >> > Seems that the install process goes through fine, but I am not able
> >> >> > to
> >> >> > create
> >> >> > new C# projects. It says the project file "csproj" is missing, or
> >> >> > something
> >> >> > like that. I can--however--create C++ prjects. You go figure....
> >> >> >
> >> >> > Just to test the installtion package, I installed on a regular
> >> >> > "clean"
> >> >> > type
> >> >> > PC workstation. The installation went fine and I could create new
> >> >> > C#
> >> >> > projects.
> >> >> >
> >> >> > Am I missing something for TablePC install. Are there any special
> >> >> > .NET
> >> >> > components that must be installed in order to develop in C#?
> >> >> >
> >> >> > Thanks,
> >> >> >
> >> >> > Larry
> >> >>
> >> >>
> >> >>
> >>
> >>
> >>
>
>
>

Darn. I'm not a programmer, so don't run those programs. Perhaps I can
persuade Tablet MVP Fritz Switzer to give this a go and see what he can come
up with for you. 8-) We'll work on it.
--
http://www.microsoft.com/windowsxp/e...ts/nichol.mspx
In memory of a true friend, Windows MVP Alex Nichol

Chris H.
Microsoft Windows MVP/Tablet PC
Tablet Creations - http://nicecreations.us/
Associate Expert
Expert Zone - www.microsoft.com/windowsxp/expertzone


"Lar-Man" <LarMan@discussions.microsoft.com> wrote in message
news:0AD3AB6C-6F38-493B-8C03-832F541F3CDF@microsoft.com...
> Chris, I am also noting as before that I can create C++ projects (MFC
> Application), Setup and Deployment Projects--no problem, but still having
> a
> problem with C#, VB and J# projects.
>
> "Chris H." wrote:
>
>> Hope it works, Larry. If not, we'll dig around for something else.
>> --
>> http://www.microsoft.com/windowsxp/e...ts/nichol.mspx
>> In memory of a true friend, Windows MVP Alex Nichol
>>
>> Chris H.
>> Microsoft Windows MVP/Tablet PC
>> Tablet Creations - http://nicecreations.us/
>> Associate Expert
>> Expert Zone - www.microsoft.com/windowsxp/expertzone
>>
>>
>> "Lar-Man" <LarMan@discussions.microsoft.com> wrote in message
>> news:A636C8C1-5B5D-4174-A5EB-4481EBB1AA09@microsoft.com...
>> > Will try. Thanks a million. Will let you know either way. Larry
>> >
>> > "Chris H." wrote:
>> >
>> >> That's good. Make sure your AV program is totally shut down, and all
>> >> other
>> >> normal programs are closed before attempting the installation. If
>> >> you're
>> >> running Norton (Symantec) they don't shut down from the Systray icon,
>> >> only
>> >> "exit" that icon.
>> >> --
>> >> http://www.microsoft.com/windowsxp/e...ts/nichol.mspx
>> >> In memory of a true friend, Windows MVP Alex Nichol
>> >>
>> >> Chris H.
>> >> Microsoft Windows MVP/Tablet PC
>> >> Tablet Creations - http://nicecreations.us/
>> >> Associate Expert
>> >> Expert Zone - www.microsoft.com/windowsxp/expertzone
>> >>
>> >>
>> >> "Lar-Man" <LarMan@discussions.microsoft.com> wrote in message
>> >> news:BF242D5A-1680-4405-BBC9-A3FE0DD03610@microsoft.com...
>> >> >I do already have Framework 1.1 installed, as well as the hotfix
>> >> >package.
>> >> >
>> >> > "Chris H." wrote:
>> >> >
>> >> >> This is pre-coffee, but do you have .NET 1.1 installed? You can
>> >> >> check
>> >> >> in
>> >> >> Add or Remove Programs, where you should find a listing of
>> >> >> "Microsoft
>> >> >> .NET
>> >> >> Framework 1.1". If it isn't exactly that, you don't have the
>> >> >> current
>> >> >> version. Additionally, there is Microsoft .NET Framework 1.1
>> >> >> Hoftix
>> >> >> (KB886903), which you need.
>> >> >> --
>> >> >> http://www.microsoft.com/windowsxp/e...ts/nichol.mspx
>> >> >> In memory of a true friend, Windows MVP Alex Nichol
>> >> >>
>> >> >> Chris H.
>> >> >> Microsoft Windows MVP/Tablet PC
>> >> >> Tablet Creations - http://nicecreations.us/
>> >> >> Associate Expert
>> >> >> Expert Zone - www.microsoft.com/windowsxp/expertzone
>> >> >>
>> >> >>
>> >> >> "Lar-Man" <Lar-Man@discussions.microsoft.com> wrote in message
>> >> >> news:8EE74ACE-53B5-47EF-A135-523EA0AEAA12@microsoft.com...
>> >> >> > Seems that the install process goes through fine, but I am not
>> >> >> > able
>> >> >> > to
>> >> >> > create
>> >> >> > new C# projects. It says the project file "csproj" is missing,
>> >> >> > or
>> >> >> > something
>> >> >> > like that. I can--however--create C++ prjects. You go
>> >> >> > figure....
>> >> >> >
>> >> >> > Just to test the installtion package, I installed on a regular
>> >> >> > "clean"
>> >> >> > type
>> >> >> > PC workstation. The installation went fine and I could create
>> >> >> > new
>> >> >> > C#
>> >> >> > projects.
>> >> >> >
>> >> >> > Am I missing something for TablePC install. Are there any
>> >> >> > special
>> >> >> > .NET
>> >> >> > components that must be installed in order to develop in C#?
>> >> >> >
>> >> >> > Thanks,
>> >> >> >
>> >> >> > Larry
>> >> >>
>> >> >>
>> >> >>
>> >>
>> >>
>> >>
>>
>>
>>

Thanks Chris. Also, as I said in my very first message, the installation
works fine on a regular worksation PC. I hope that comment doesn't lead
anyone in the wrong direction.

My best,

Larry



"Chris H." wrote:

> Darn. I'm not a programmer, so don't run those programs. Perhaps I can
> persuade Tablet MVP Fritz Switzer to give this a go and see what he can come
> up with for you. 8-) We'll work on it.
> --
> http://www.microsoft.com/windowsxp/e...ts/nichol.mspx
> In memory of a true friend, Windows MVP Alex Nichol
>
> Chris H.
> Microsoft Windows MVP/Tablet PC
> Tablet Creations - http://nicecreations.us/
> Associate Expert
> Expert Zone - www.microsoft.com/windowsxp/expertzone
>
>
> "Lar-Man" <LarMan@discussions.microsoft.com> wrote in message
> news:0AD3AB6C-6F38-493B-8C03-832F541F3CDF@microsoft.com...
> > Chris, I am also noting as before that I can create C++ projects (MFC
> > Application), Setup and Deployment Projects--no problem, but still having
> > a
> > problem with C#, VB and J# projects.
> >
> > "Chris H." wrote:
> >
> >> Hope it works, Larry. If not, we'll dig around for something else.
> >> --
> >> http://www.microsoft.com/windowsxp/e...ts/nichol.mspx
> >> In memory of a true friend, Windows MVP Alex Nichol
> >>
> >> Chris H.
> >> Microsoft Windows MVP/Tablet PC
> >> Tablet Creations - http://nicecreations.us/
> >> Associate Expert
> >> Expert Zone - www.microsoft.com/windowsxp/expertzone
> >>
> >>
> >> "Lar-Man" <LarMan@discussions.microsoft.com> wrote in message
> >> news:A636C8C1-5B5D-4174-A5EB-4481EBB1AA09@microsoft.com...
> >> > Will try. Thanks a million. Will let you know either way. Larry
> >> >
> >> > "Chris H." wrote:
> >> >
> >> >> That's good. Make sure your AV program is totally shut down, and all
> >> >> other
> >> >> normal programs are closed before attempting the installation. If
> >> >> you're
> >> >> running Norton (Symantec) they don't shut down from the Systray icon,
> >> >> only
> >> >> "exit" that icon.
> >> >> --
> >> >> http://www.microsoft.com/windowsxp/e...ts/nichol.mspx
> >> >> In memory of a true friend, Windows MVP Alex Nichol
> >> >>
> >> >> Chris H.
> >> >> Microsoft Windows MVP/Tablet PC
> >> >> Tablet Creations - http://nicecreations.us/
> >> >> Associate Expert
> >> >> Expert Zone - www.microsoft.com/windowsxp/expertzone
> >> >>
> >> >>
> >> >> "Lar-Man" <LarMan@discussions.microsoft.com> wrote in message
> >> >> news:BF242D5A-1680-4405-BBC9-A3FE0DD03610@microsoft.com...
> >> >> >I do already have Framework 1.1 installed, as well as the hotfix
> >> >> >package.
> >> >> >
> >> >> > "Chris H." wrote:
> >> >> >
> >> >> >> This is pre-coffee, but do you have .NET 1.1 installed? You can
> >> >> >> check
> >> >> >> in
> >> >> >> Add or Remove Programs, where you should find a listing of
> >> >> >> "Microsoft
> >> >> >> .NET
> >> >> >> Framework 1.1". If it isn't exactly that, you don't have the
> >> >> >> current
> >> >> >> version. Additionally, there is Microsoft .NET Framework 1.1
> >> >> >> Hoftix
> >> >> >> (KB886903), which you need.
> >> >> >> --
> >> >> >> http://www.microsoft.com/windowsxp/e...ts/nichol.mspx
> >> >> >> In memory of a true friend, Windows MVP Alex Nichol
> >> >> >>
> >> >> >> Chris H.
> >> >> >> Microsoft Windows MVP/Tablet PC
> >> >> >> Tablet Creations - http://nicecreations.us/
> >> >> >> Associate Expert
> >> >> >> Expert Zone - www.microsoft.com/windowsxp/expertzone
> >> >> >>
> >> >> >>
> >> >> >> "Lar-Man" <Lar-Man@discussions.microsoft.com> wrote in message
> >> >> >> news:8EE74ACE-53B5-47EF-A135-523EA0AEAA12@microsoft.com...
> >> >> >> > Seems that the install process goes through fine, but I am not
> >> >> >> > able
> >> >> >> > to
> >> >> >> > create
> >> >> >> > new C# projects. It says the project file "csproj" is missing,
> >> >> >> > or
> >> >> >> > something
> >> >> >> > like that. I can--however--create C++ prjects. You go
> >> >> >> > figure....
> >> >> >> >
> >> >> >> > Just to test the installtion package, I installed on a regular
> >> >> >> > "clean"
> >> >> >> > type
> >> >> >> > PC workstation. The installation went fine and I could create
> >> >> >> > new
> >> >> >> > C#
> >> >> >> > projects.
> >> >> >> >
> >> >> >> > Am I missing something for TablePC install. Are there any
> >> >> >> > special
> >> >> >> > .NET
> >> >> >> > components that must be installed in order to develop in C#?
> >> >> >> >
> >> >> >> > Thanks,
> >> >> >> >
> >> >> >> > Larry
> >> >> >>
> >> >> >>
> >> >> >>
> >> >>
> >> >>
> >> >>
> >>
> >>
> >>
>
>
>

Larry,

A Google search of your problem turned up these two possible solutions.

1. Re-install the framework.
2. Do a Repair of the Visual Studio.

Here is a thread.....

Have the exact same problem with VS2003 on Windows XP sp2 (tablet). And
it's the same for all project types.


- Hide quoted text -
- Show quoted text -

"BBULL" wrote:
> When I choose New Project, and I choose something like Visual Basic
> Projects/Windows Application, I
> get an error: The application for project 'C:\Program Files\Microsoft
> Visual
> Studio .NET 2003\Vb7\VBWizards\WindowsAppl*ication.vbproj' is not
> installed.
> Make sure the application for the project type (.vbproj) is installed



BBULL Jan 12, 1:21 pm show options

Newsgroups: microsoft.public.vsnet.setup
From: "BBULL" <B...@discussions.microsoft.com> - Find messages
by this author
Date: Wed, 12 Jan 2005 13:21:05 -0800
Local: Wed,Jan 12 2005 1:21 pm
Subject: RE: Can't open or create VB/C# projects using VS2003 on
XP MCE 2005
Reply to Author | Forward | Print | Individual Message | Show
original | Report Abuse

Re-installing the framework did the trick.





You may drop into microsoft.public.vsnet.general with the question also. A
couple posts said a VS Repair fixed the problem.

Hope this helps,

Fritz



--
Fritz Switzer
Microsoft MVP Tablet PC
www.abletfactory.com



"Lar-Man" <LarMan@discussions.microsoft.com> wrote in message
news:ED919EC3-C375-4335-8610-4AD21F7DB742@microsoft.com...
> Thanks Chris. Also, as I said in my very first message, the installation
> works fine on a regular worksation PC. I hope that comment doesn't lead
> anyone in the wrong direction.
>
> My best,
>
> Larry
>
>
>
> "Chris H." wrote:
>
>> Darn. I'm not a programmer, so don't run those programs. Perhaps I can
>> persuade Tablet MVP Fritz Switzer to give this a go and see what he can
>> come
>> up with for you. 8-) We'll work on it.
>> --
>> http://www.microsoft.com/windowsxp/e...ts/nichol.mspx
>> In memory of a true friend, Windows MVP Alex Nichol
>>
>> Chris H.
>> Microsoft Windows MVP/Tablet PC
>> Tablet Creations - http://nicecreations.us/
>> Associate Expert
>> Expert Zone - www.microsoft.com/windowsxp/expertzone
>>
>>
>> "Lar-Man" <LarMan@discussions.microsoft.com> wrote in message
>> news:0AD3AB6C-6F38-493B-8C03-832F541F3CDF@microsoft.com...
>> > Chris, I am also noting as before that I can create C++ projects (MFC
>> > Application), Setup and Deployment Projects--no problem, but still
>> > having
>> > a
>> > problem with C#, VB and J# projects.
>> >
>> > "Chris H." wrote:
>> >
>> >> Hope it works, Larry. If not, we'll dig around for something else.
>> >> --
>> >> http://www.microsoft.com/windowsxp/e...ts/nichol.mspx
>> >> In memory of a true friend, Windows MVP Alex Nichol
>> >>
>> >> Chris H.
>> >> Microsoft Windows MVP/Tablet PC
>> >> Tablet Creations - http://nicecreations.us/
>> >> Associate Expert
>> >> Expert Zone - www.microsoft.com/windowsxp/expertzone
>> >>
>> >>
>> >> "Lar-Man" <LarMan@discussions.microsoft.com> wrote in message
>> >> news:A636C8C1-5B5D-4174-A5EB-4481EBB1AA09@microsoft.com...
>> >> > Will try. Thanks a million. Will let you know either way. Larry
>> >> >
>> >> > "Chris H." wrote:
>> >> >
>> >> >> That's good. Make sure your AV program is totally shut down, and
>> >> >> all
>> >> >> other
>> >> >> normal programs are closed before attempting the installation. If
>> >> >> you're
>> >> >> running Norton (Symantec) they don't shut down from the Systray
>> >> >> icon,
>> >> >> only
>> >> >> "exit" that icon.
>> >> >> --
>> >> >> http://www.microsoft.com/windowsxp/e...ts/nichol.mspx
>> >> >> In memory of a true friend, Windows MVP Alex Nichol
>> >> >>
>> >> >> Chris H.
>> >> >> Microsoft Windows MVP/Tablet PC
>> >> >> Tablet Creations - http://nicecreations.us/
>> >> >> Associate Expert
>> >> >> Expert Zone - www.microsoft.com/windowsxp/expertzone
>> >> >>
>> >> >>
>> >> >> "Lar-Man" <LarMan@discussions.microsoft.com> wrote in message
>> >> >> news:BF242D5A-1680-4405-BBC9-A3FE0DD03610@microsoft.com...
>> >> >> >I do already have Framework 1.1 installed, as well as the hotfix
>> >> >> >package.
>> >> >> >
>> >> >> > "Chris H." wrote:
>> >> >> >
>> >> >> >> This is pre-coffee, but do you have .NET 1.1 installed? You can
>> >> >> >> check
>> >> >> >> in
>> >> >> >> Add or Remove Programs, where you should find a listing of
>> >> >> >> "Microsoft
>> >> >> >> .NET
>> >> >> >> Framework 1.1". If it isn't exactly that, you don't have the
>> >> >> >> current
>> >> >> >> version. Additionally, there is Microsoft .NET Framework 1.1
>> >> >> >> Hoftix
>> >> >> >> (KB886903), which you need.
>> >> >> >> --
>> >> >> >> http://www.microsoft.com/windowsxp/e...ts/nichol.mspx
>> >> >> >> In memory of a true friend, Windows MVP Alex Nichol
>> >> >> >>
>> >> >> >> Chris H.
>> >> >> >> Microsoft Windows MVP/Tablet PC
>> >> >> >> Tablet Creations - http://nicecreations.us/
>> >> >> >> Associate Expert
>> >> >> >> Expert Zone - www.microsoft.com/windowsxp/expertzone
>> >> >> >>
>> >> >> >>
>> >> >> >> "Lar-Man" <Lar-Man@discussions.microsoft.com> wrote in message
>> >> >> >> news:8EE74ACE-53B5-47EF-A135-523EA0AEAA12@microsoft.com...
>> >> >> >> > Seems that the install process goes through fine, but I am not
>> >> >> >> > able
>> >> >> >> > to
>> >> >> >> > create
>> >> >> >> > new C# projects. It says the project file "csproj" is
>> >> >> >> > missing,
>> >> >> >> > or
>> >> >> >> > something
>> >> >> >> > like that. I can--however--create C++ prjects. You go
>> >> >> >> > figure....
>> >> >> >> >
>> >> >> >> > Just to test the installtion package, I installed on a regular
>> >> >> >> > "clean"
>> >> >> >> > type
>> >> >> >> > PC workstation. The installation went fine and I could create
>> >> >> >> > new
>> >> >> >> > C#
>> >> >> >> > projects.
>> >> >> >> >
>> >> >> >> > Am I missing something for TablePC install. Are there any
>> >> >> >> > special
>> >> >> >> > .NET
>> >> >> >> > components that must be installed in order to develop in C#?
>> >> >> >> >
>> >> >> >> > Thanks,
>> >> >> >> >
>> >> >> >> > Larry
>> >> >> >>
>> >> >> >>
>> >> >> >>
>> >> >>
>> >> >>
>> >> >>
>> >>
>> >>
>> >>
>>
>>
>>

Fritz, I will follow up with the information you have provided.

A multiple, gazillion thanks to you!

I will let you know either way by perhaps tomorrow.

Larry


"Fritz Switzer" wrote:

> Larry,
>
> A Google search of your problem turned up these two possible solutions.
>
> 1. Re-install the framework.
> 2. Do a Repair of the Visual Studio.
>
> Here is a thread.....
>
> Have the exact same problem with VS2003 on Windows XP sp2 (tablet). And
> it's the same for all project types.
>
>
> - Hide quoted text -
> - Show quoted text -
>
> "BBULL" wrote:
> > When I choose New Project, and I choose something like Visual Basic
> > Projects/Windows Application, I
> > get an error: The application for project 'C:\Program Files\Microsoft
> > Visual
> > Studio .NET 2003\Vb7\VBWizards\WindowsApplÂ*ication.vbproj' is not
> > installed.
> > Make sure the application for the project type (.vbproj) is installed
>
>
>
> BBULL Jan 12, 1:21 pm show options
>
> Newsgroups: microsoft.public.vsnet.setup
> From: "BBULL" <B...@discussions.microsoft.com> - Find messages
> by this author
> Date: Wed, 12 Jan 2005 13:21:05 -0800
> Local: Wed,Jan 12 2005 1:21 pm
> Subject: RE: Can't open or create VB/C# projects using VS2003 on
> XP MCE 2005
> Reply to Author | Forward | Print | Individual Message | Show
> original | Report Abuse
>
> Re-installing the framework did the trick.
>
>
>
>
>
> You may drop into microsoft.public.vsnet.general with the question also. A
> couple posts said a VS Repair fixed the problem.
>
> Hope this helps,
>
> Fritz
>
>
>
> --
> Fritz Switzer
> Microsoft MVP Tablet PC
> www.abletfactory.com
>
>
>
> "Lar-Man" <LarMan@discussions.microsoft.com> wrote in message
> news:ED919EC3-C375-4335-8610-4AD21F7DB742@microsoft.com...
> > Thanks Chris. Also, as I said in my very first message, the installation
> > works fine on a regular worksation PC. I hope that comment doesn't lead
> > anyone in the wrong direction.
> >
> > My best,
> >
> > Larry
> >
> >
> >
> > "Chris H." wrote:
> >
> >> Darn. I'm not a programmer, so don't run those programs. Perhaps I can
> >> persuade Tablet MVP Fritz Switzer to give this a go and see what he can
> >> come
> >> up with for you. 8-) We'll work on it.
> >> --
> >> http://www.microsoft.com/windowsxp/e...ts/nichol.mspx
> >> In memory of a true friend, Windows MVP Alex Nichol
> >>
> >> Chris H.
> >> Microsoft Windows MVP/Tablet PC
> >> Tablet Creations - http://nicecreations.us/
> >> Associate Expert
> >> Expert Zone - www.microsoft.com/windowsxp/expertzone
> >>
> >>
> >> "Lar-Man" <LarMan@discussions.microsoft.com> wrote in message
> >> news:0AD3AB6C-6F38-493B-8C03-832F541F3CDF@microsoft.com...
> >> > Chris, I am also noting as before that I can create C++ projects (MFC
> >> > Application), Setup and Deployment Projects--no problem, but still
> >> > having
> >> > a
> >> > problem with C#, VB and J# projects.
> >> >
> >> > "Chris H." wrote:
> >> >
> >> >> Hope it works, Larry. If not, we'll dig around for something else.
> >> >> --
> >> >> http://www.microsoft.com/windowsxp/e...ts/nichol.mspx
> >> >> In memory of a true friend, Windows MVP Alex Nichol
> >> >>
> >> >> Chris H.
> >> >> Microsoft Windows MVP/Tablet PC
> >> >> Tablet Creations - http://nicecreations.us/
> >> >> Associate Expert
> >> >> Expert Zone - www.microsoft.com/windowsxp/expertzone
> >> >>
> >> >>
> >> >> "Lar-Man" <LarMan@discussions.microsoft.com> wrote in message
> >> >> news:A636C8C1-5B5D-4174-A5EB-4481EBB1AA09@microsoft.com...
> >> >> > Will try. Thanks a million. Will let you know either way. Larry
> >> >> >
> >> >> > "Chris H." wrote:
> >> >> >
> >> >> >> That's good. Make sure your AV program is totally shut down, and
> >> >> >> all
> >> >> >> other
> >> >> >> normal programs are closed before attempting the installation. If
> >> >> >> you're
> >> >> >> running Norton (Symantec) they don't shut down from the Systray
> >> >> >> icon,
> >> >> >> only
> >> >> >> "exit" that icon.
> >> >> >> --
> >> >> >> http://www.microsoft.com/windowsxp/e...ts/nichol.mspx
> >> >> >> In memory of a true friend, Windows MVP Alex Nichol
> >> >> >>
> >> >> >> Chris H.
> >> >> >> Microsoft Windows MVP/Tablet PC
> >> >> >> Tablet Creations - http://nicecreations.us/
> >> >> >> Associate Expert
> >> >> >> Expert Zone - www.microsoft.com/windowsxp/expertzone
> >> >> >>
> >> >> >>
> >> >> >> "Lar-Man" <LarMan@discussions.microsoft.com> wrote in message
> >> >> >> news:BF242D5A-1680-4405-BBC9-A3FE0DD03610@microsoft.com...
> >> >> >> >I do already have Framework 1.1 installed, as well as the hotfix
> >> >> >> >package.
> >> >> >> >
> >> >> >> > "Chris H." wrote:
> >> >> >> >
> >> >> >> >> This is pre-coffee, but do you have .NET 1.1 installed? You can
> >> >> >> >> check
> >> >> >> >> in
> >> >> >> >> Add or Remove Programs, where you should find a listing of
> >> >> >> >> "Microsoft
> >> >> >> >> .NET
> >> >> >> >> Framework 1.1". If it isn't exactly that, you don't have the
> >> >> >> >> current
> >> >> >> >> version. Additionally, there is Microsoft .NET Framework 1.1
> >> >> >> >> Hoftix
> >> >> >> >> (KB886903), which you need.
> >> >> >> >> --
> >> >> >> >> http://www.microsoft.com/windowsxp/e...ts/nichol.mspx
> >> >> >> >> In memory of a true friend, Windows MVP Alex Nichol
> >> >> >> >>
> >> >> >> >> Chris H.
> >> >> >> >> Microsoft Windows MVP/Tablet PC
> >> >> >> >> Tablet Creations - http://nicecreations.us/
> >> >> >> >> Associate Expert
> >> >> >> >> Expert Zone - www.microsoft.com/windowsxp/expertzone
> >> >> >> >>
> >> >> >> >>
> >> >> >> >> "Lar-Man" <Lar-Man@discussions.microsoft.com> wrote in message
> >> >> >> >> news:8EE74ACE-53B5-47EF-A135-523EA0AEAA12@microsoft.com...
> >> >> >> >> > Seems that the install process goes through fine, but I am not
> >> >> >> >> > able
> >> >> >> >> > to
> >> >> >> >> > create
> >> >> >> >> > new C# projects. It says the project file "csproj" is
> >> >> >> >> > missing,
> >> >> >> >> > or
> >> >> >> >> > something
> >> >> >> >> > like that. I can--however--create C++ prjects. You go
> >> >> >> >> > figure....
> >> >> >> >> >
> >> >> >> >> > Just to test the installtion package, I installed on a regular
> >> >> >> >> > "clean"
> >> >> >> >> > type
> >> >> >> >> > PC workstation. The installation went fine and I could create
> >> >> >> >> > new
> >> >> >> >> > C#
> >> >> >> >> > projects.
> >> >> >> >> >
> >> >> >> >> > Am I missing something for TablePC install. Are there any
> >> >> >> >> > special
> >> >> >> >> > .NET
> >> >> >> >> > components that must be installed in order to develop in C#?
> >> >> >> >> >
> >> >> >> >> > Thanks,
> >> >> >> >> >
> >> >> >> >> > Larry
> >> >> >> >>
> >> >> >> >>
> >> >> >> >>
> >> >> >>
> >> >> >>
> >> >> >>
> >> >>
> >> >>
> >> >>
> >>
> >>
> >>
>
>
>

Thanks for jumping in here, Fritz. I appreciate it.
--
http://www.microsoft.com/windowsxp/e...ts/nichol.mspx
In memory of a true friend, Windows MVP Alex Nichol

Chris H.
Microsoft Windows MVP/Tablet PC
Tablet Creations - http://nicecreations.us/
Associate Expert
Expert Zone - www.microsoft.com/windowsxp/expertzone


"Fritz Switzer" <fritz.switzer@abletfactory.com> wrote in message
news:%23WMNQJtPFHA.1528@TK2MSFTNGP09.phx.gbl...
> Larry,
>
> A Google search of your problem turned up these two possible solutions.
>
> 1. Re-install the framework.
> 2. Do a Repair of the Visual Studio.
>
> Here is a thread.....
>
> Have the exact same problem with VS2003 on Windows XP sp2 (tablet). And
> it's the same for all project types.
>
>
> - Hide quoted text -
> - Show quoted text -
>
> "BBULL" wrote:
>> When I choose New Project, and I choose something like Visual Basic
>> Projects/Windows Application, I
>> get an error: The application for project 'C:\Program Files\Microsoft
>> Visual
>> Studio .NET 2003\Vb7\VBWizards\WindowsAppl*ication.vbproj' is not
>> installed.
>> Make sure the application for the project type (.vbproj) is installed
>
>
>
> BBULL Jan 12, 1:21 pm show options
>
> Newsgroups: microsoft.public.vsnet.setup
> From: "BBULL" <B...@discussions.microsoft.com> - Find messages
> by this author
> Date: Wed, 12 Jan 2005 13:21:05 -0800
> Local: Wed,Jan 12 2005 1:21 pm
> Subject: RE: Can't open or create VB/C# projects using VS2003
> on XP MCE 2005
> Reply to Author | Forward | Print | Individual Message | Show
> original | Report Abuse
>
> Re-installing the framework did the trick.
>
>
>
>
>
> You may drop into microsoft.public.vsnet.general with the question also.
> A couple posts said a VS Repair fixed the problem.
>
> Hope this helps,
>
> Fritz
>
>
>
> --
> Fritz Switzer
> Microsoft MVP Tablet PC
> www.abletfactory.com
>
>
>
> "Lar-Man" <LarMan@discussions.microsoft.com> wrote in message
> news:ED919EC3-C375-4335-8610-4AD21F7DB742@microsoft.com...
>> Thanks Chris. Also, as I said in my very first message, the installation
>> works fine on a regular worksation PC. I hope that comment doesn't lead
>> anyone in the wrong direction.
>>
>> My best,
>>
>> Larry
>>
>>
>>
>> "Chris H." wrote:
>>
>>> Darn. I'm not a programmer, so don't run those programs. Perhaps I can
>>> persuade Tablet MVP Fritz Switzer to give this a go and see what he can
>>> come
>>> up with for you. 8-) We'll work on it.
>>> --
>>> http://www.microsoft.com/windowsxp/e...ts/nichol.mspx
>>> In memory of a true friend, Windows MVP Alex Nichol
>>>
>>> Chris H.
>>> Microsoft Windows MVP/Tablet PC
>>> Tablet Creations - http://nicecreations.us/
>>> Associate Expert
>>> Expert Zone - www.microsoft.com/windowsxp/expertzone
>>>
>>>
>>> "Lar-Man" <LarMan@discussions.microsoft.com> wrote in message
>>> news:0AD3AB6C-6F38-493B-8C03-832F541F3CDF@microsoft.com...
>>> > Chris, I am also noting as before that I can create C++ projects (MFC
>>> > Application), Setup and Deployment Projects--no problem, but still
>>> > having
>>> > a
>>> > problem with C#, VB and J# projects.
>>> >
>>> > "Chris H." wrote:
>>> >
>>> >> Hope it works, Larry. If not, we'll dig around for something else.
>>> >> --
>>> >> http://www.microsoft.com/windowsxp/e...ts/nichol.mspx
>>> >> In memory of a true friend, Windows MVP Alex Nichol
>>> >>
>>> >> Chris H.
>>> >> Microsoft Windows MVP/Tablet PC
>>> >> Tablet Creations - http://nicecreations.us/
>>> >> Associate Expert
>>> >> Expert Zone - www.microsoft.com/windowsxp/expertzone
>>> >>
>>> >>
>>> >> "Lar-Man" <LarMan@discussions.microsoft.com> wrote in message
>>> >> news:A636C8C1-5B5D-4174-A5EB-4481EBB1AA09@microsoft.com...
>>> >> > Will try. Thanks a million. Will let you know either way. Larry
>>> >> >
>>> >> > "Chris H." wrote:
>>> >> >
>>> >> >> That's good. Make sure your AV program is totally shut down, and
>>> >> >> all
>>> >> >> other
>>> >> >> normal programs are closed before attempting the installation. If
>>> >> >> you're
>>> >> >> running Norton (Symantec) they don't shut down from the Systray
>>> >> >> icon,
>>> >> >> only
>>> >> >> "exit" that icon.
>>> >> >> --
>>> >> >> http://www.microsoft.com/windowsxp/e...ts/nichol.mspx
>>> >> >> In memory of a true friend, Windows MVP Alex Nichol
>>> >> >>
>>> >> >> Chris H.
>>> >> >> Microsoft Windows MVP/Tablet PC
>>> >> >> Tablet Creations - http://nicecreations.us/
>>> >> >> Associate Expert
>>> >> >> Expert Zone - www.microsoft.com/windowsxp/expertzone
>>> >> >>
>>> >> >>
>>> >> >> "Lar-Man" <LarMan@discussions.microsoft.com> wrote in message
>>> >> >> news:BF242D5A-1680-4405-BBC9-A3FE0DD03610@microsoft.com...
>>> >> >> >I do already have Framework 1.1 installed, as well as the hotfix
>>> >> >> >package.
>>> >> >> >
>>> >> >> > "Chris H." wrote:
>>> >> >> >
>>> >> >> >> This is pre-coffee, but do you have .NET 1.1 installed? You
>>> >> >> >> can
>>> >> >> >> check
>>> >> >> >> in
>>> >> >> >> Add or Remove Programs, where you should find a listing of
>>> >> >> >> "Microsoft
>>> >> >> >> .NET
>>> >> >> >> Framework 1.1". If it isn't exactly that, you don't have the
>>> >> >> >> current
>>> >> >> >> version. Additionally, there is Microsoft .NET Framework 1.1
>>> >> >> >> Hoftix
>>> >> >> >> (KB886903), which you need.
>>> >> >> >> --
>>> >> >> >> http://www.microsoft.com/windowsxp/e...ts/nichol.mspx
>>> >> >> >> In memory of a true friend, Windows MVP Alex Nichol
>>> >> >> >>
>>> >> >> >> Chris H.
>>> >> >> >> Microsoft Windows MVP/Tablet PC
>>> >> >> >> Tablet Creations - http://nicecreations.us/
>>> >> >> >> Associate Expert
>>> >> >> >> Expert Zone - www.microsoft.com/windowsxp/expertzone
>>> >> >> >>
>>> >> >> >>
>>> >> >> >> "Lar-Man" <Lar-Man@discussions.microsoft.com> wrote in message
>>> >> >> >> news:8EE74ACE-53B5-47EF-A135-523EA0AEAA12@microsoft.com...
>>> >> >> >> > Seems that the install process goes through fine, but I am
>>> >> >> >> > not
>>> >> >> >> > able
>>> >> >> >> > to
>>> >> >> >> > create
>>> >> >> >> > new C# projects. It says the project file "csproj" is
>>> >> >> >> > missing,
>>> >> >> >> > or
>>> >> >> >> > something
>>> >> >> >> > like that. I can--however--create C++ prjects. You go
>>> >> >> >> > figure....
>>> >> >> >> >
>>> >> >> >> > Just to test the installtion package, I installed on a
>>> >> >> >> > regular
>>> >> >> >> > "clean"
>>> >> >> >> > type
>>> >> >> >> > PC workstation. The installation went fine and I could
>>> >> >> >> > create
>>> >> >> >> > new
>>> >> >> >> > C#
>>> >> >> >> > projects.
>>> >> >> >> >
>>> >> >> >> > Am I missing something for TablePC install. Are there any
>>> >> >> >> > special
>>> >> >> >> > .NET
>>> >> >> >> > components that must be installed in order to develop in C#?
>>> >> >> >> >
>>> >> >> >> > Thanks,
>>> >> >> >> >
>>> >> >> >> > Larry
>>> >> >> >>
>>> >> >> >>
>>> >> >> >>
>>> >> >>
>>> >> >>
>>> >> >>
>>> >>
>>> >>
>>> >>
>>>
>>>
>>>
>
>
>

Chris,

The problem is solved!!!

Per Fritz's suggestion, I tried first to run VS repair and the problem
persisted, but then I removed Framework 1.1 as well as the 1.1 hotfix. I
then reinstalled Framework 1.1--and it all worked! I can now create C#
projects on my TabletPC.

But of course once I install the hotfix, we will be back to where we
started; I hope not....

So many, many gazillion--multitasking--THANKS!

(I will let Fritz know, of course.)

My bestset,

Larry


"Chris H." wrote:

> Thanks for jumping in here, Fritz. I appreciate it.
> --
> http://www.microsoft.com/windowsxp/e...ts/nichol.mspx
> In memory of a true friend, Windows MVP Alex Nichol
>
> Chris H.
> Microsoft Windows MVP/Tablet PC
> Tablet Creations - http://nicecreations.us/
> Associate Expert
> Expert Zone - www.microsoft.com/windowsxp/expertzone
>
>
> "Fritz Switzer" <fritz.switzer@abletfactory.com> wrote in message
> news:%23WMNQJtPFHA.1528@TK2MSFTNGP09.phx.gbl...
> > Larry,
> >
> > A Google search of your problem turned up these two possible solutions.
> >
> > 1. Re-install the framework.
> > 2. Do a Repair of the Visual Studio.
> >
> > Here is a thread.....
> >
> > Have the exact same problem with VS2003 on Windows XP sp2 (tablet). And
> > it's the same for all project types.
> >
> >
> > - Hide quoted text -
> > - Show quoted text -
> >
> > "BBULL" wrote:
> >> When I choose New Project, and I choose something like Visual Basic
> >> Projects/Windows Application, I
> >> get an error: The application for project 'C:\Program Files\Microsoft
> >> Visual
> >> Studio .NET 2003\Vb7\VBWizards\WindowsApplÂ*ication.vbproj' is not
> >> installed.
> >> Make sure the application for the project type (.vbproj) is installed
> >
> >
> >
> > BBULL Jan 12, 1:21 pm show options
> >
> > Newsgroups: microsoft.public.vsnet.setup
> > From: "BBULL" <B...@discussions.microsoft.com> - Find messages
> > by this author
> > Date: Wed, 12 Jan 2005 13:21:05 -0800
> > Local: Wed,Jan 12 2005 1:21 pm
> > Subject: RE: Can't open or create VB/C# projects using VS2003
> > on XP MCE 2005
> > Reply to Author | Forward | Print | Individual Message | Show
> > original | Report Abuse
> >
> > Re-installing the framework did the trick.
> >
> >
> >
> >
> >
> > You may drop into microsoft.public.vsnet.general with the question also.
> > A couple posts said a VS Repair fixed the problem.
> >
> > Hope this helps,
> >
> > Fritz
> >
> >
> >
> > --
> > Fritz Switzer
> > Microsoft MVP Tablet PC
> > www.abletfactory.com
> >
> >
> >
> > "Lar-Man" <LarMan@discussions.microsoft.com> wrote in message
> > news:ED919EC3-C375-4335-8610-4AD21F7DB742@microsoft.com...
> >> Thanks Chris. Also, as I said in my very first message, the installation
> >> works fine on a regular worksation PC. I hope that comment doesn't lead
> >> anyone in the wrong direction.
> >>
> >> My best,
> >>
> >> Larry
> >>
> >>
> >>
> >> "Chris H." wrote:
> >>
> >>> Darn. I'm not a programmer, so don't run those programs. Perhaps I can
> >>> persuade Tablet MVP Fritz Switzer to give this a go and see what he can
> >>> come
> >>> up with for you. 8-) We'll work on it.
> >>> --
> >>> http://www.microsoft.com/windowsxp/e...ts/nichol.mspx
> >>> In memory of a true friend, Windows MVP Alex Nichol
> >>>
> >>> Chris H.
> >>> Microsoft Windows MVP/Tablet PC
> >>> Tablet Creations - http://nicecreations.us/
> >>> Associate Expert
> >>> Expert Zone - www.microsoft.com/windowsxp/expertzone
> >>>
> >>>
> >>> "Lar-Man" <LarMan@discussions.microsoft.com> wrote in message
> >>> news:0AD3AB6C-6F38-493B-8C03-832F541F3CDF@microsoft.com...
> >>> > Chris, I am also noting as before that I can create C++ projects (MFC
> >>> > Application), Setup and Deployment Projects--no problem, but still
> >>> > having
> >>> > a
> >>> > problem with C#, VB and J# projects.
> >>> >
> >>> > "Chris H." wrote:
> >>> >
> >>> >> Hope it works, Larry. If not, we'll dig around for something else.
> >>> >> --
> >>> >> http://www.microsoft.com/windowsxp/e...ts/nichol.mspx
> >>> >> In memory of a true friend, Windows MVP Alex Nichol
> >>> >>
> >>> >> Chris H.
> >>> >> Microsoft Windows MVP/Tablet PC
> >>> >> Tablet Creations - http://nicecreations.us/
> >>> >> Associate Expert
> >>> >> Expert Zone - www.microsoft.com/windowsxp/expertzone
> >>> >>
> >>> >>
> >>> >> "Lar-Man" <LarMan@discussions.microsoft.com> wrote in message
> >>> >> news:A636C8C1-5B5D-4174-A5EB-4481EBB1AA09@microsoft.com...
> >>> >> > Will try. Thanks a million. Will let you know either way. Larry
> >>> >> >
> >>> >> > "Chris H." wrote:
> >>> >> >
> >>> >> >> That's good. Make sure your AV program is totally shut down, and
> >>> >> >> all
> >>> >> >> other
> >>> >> >> normal programs are closed before attempting the installation. If
> >>> >> >> you're
> >>> >> >> running Norton (Symantec) they don't shut down from the Systray
> >>> >> >> icon,
> >>> >> >> only
> >>> >> >> "exit" that icon.
> >>> >> >> --
> >>> >> >> http://www.microsoft.com/windowsxp/e...ts/nichol.mspx
> >>> >> >> In memory of a true friend, Windows MVP Alex Nichol
> >>> >> >>
> >>> >> >> Chris H.
> >>> >> >> Microsoft Windows MVP/Tablet PC
> >>> >> >> Tablet Creations - http://nicecreations.us/
> >>> >> >> Associate Expert
> >>> >> >> Expert Zone - www.microsoft.com/windowsxp/expertzone
> >>> >> >>
> >>> >> >>
> >>> >> >> "Lar-Man" <LarMan@discussions.microsoft.com> wrote in message
> >>> >> >> news:BF242D5A-1680-4405-BBC9-A3FE0DD03610@microsoft.com...
> >>> >> >> >I do already have Framework 1.1 installed, as well as the hotfix
> >>> >> >> >package.
> >>> >> >> >
> >>> >> >> > "Chris H." wrote:
> >>> >> >> >
> >>> >> >> >> This is pre-coffee, but do you have .NET 1.1 installed? You
> >>> >> >> >> can
> >>> >> >> >> check
> >>> >> >> >> in
> >>> >> >> >> Add or Remove Programs, where you should find a listing of
> >>> >> >> >> "Microsoft
> >>> >> >> >> .NET
> >>> >> >> >> Framework 1.1". If it isn't exactly that, you don't have the
> >>> >> >> >> current
> >>> >> >> >> version. Additionally, there is Microsoft .NET Framework 1.1
> >>> >> >> >> Hoftix
> >>> >> >> >> (KB886903), which you need.
> >>> >> >> >> --
> >>> >> >> >> http://www.microsoft.com/windowsxp/e...ts/nichol.mspx
> >>> >> >> >> In memory of a true friend, Windows MVP Alex Nichol
> >>> >> >> >>
> >>> >> >> >> Chris H.
> >>> >> >> >> Microsoft Windows MVP/Tablet PC
> >>> >> >> >> Tablet Creations - http://nicecreations.us/
> >>> >> >> >> Associate Expert
> >>> >> >> >> Expert Zone - www.microsoft.com/windowsxp/expertzone
> >>> >> >> >>
> >>> >> >> >>
> >>> >> >> >> "Lar-Man" <Lar-Man@discussions.microsoft.com> wrote in message
> >>> >> >> >> news:8EE74ACE-53B5-47EF-A135-523EA0AEAA12@microsoft.com...
> >>> >> >> >> > Seems that the install process goes through fine, but I am
> >>> >> >> >> > not
> >>> >> >> >> > able
> >>> >> >> >> > to
> >>> >> >> >> > create
> >>> >> >> >> > new C# projects. It says the project file "csproj" is
> >>> >> >> >> > missing,
> >>> >> >> >> > or
> >>> >> >> >> > something
> >>> >> >> >> > like that. I can--however--create C++ prjects. You go
> >>> >> >> >> > figure....
> >>> >> >> >> >
> >>> >> >> >> > Just to test the installtion package, I installed on a
> >>> >> >> >> > regular
> >>> >> >> >> > "clean"
> >>> >> >> >> > type
> >>> >> >> >> > PC workstation. The installation went fine and I could
> >>> >> >> >> > create
> >>> >> >> >> > new
> >>> >> >> >> > C#
> >>> >> >> >> > projects.
> >>> >> >> >> >
> >>> >> >> >> > Am I missing something for TablePC install. Are there any
> >>> >> >> >> > special
> >>> >> >> >> > .NET
> >>> >> >> >> > components that must be installed in order to develop in C#?
> >>> >> >> >> >
> >>> >> >> >> > Thanks,
> >>> >> >> >> >
> >>> >> >> >> > Larry
> >>> >> >> >>
> >>> >> >> >>
> >>> >> >> >>
> >>> >> >>
> >>> >> >>
> >>> >> >>
> >>> >>
> >>> >>
> >>> >>
> >>>
> >>>
> >>>
> >
> >
> >
>
>
>