I wrote some codes to soft reset my ppc and ppc phone, but when soft
reset the ppc phone, it can't start. The screen is white. Using the
soft reset key can't do so!
The device is belong to my boss.
He will kill me !!!!]
Can some one give me some advice?
Thanks Very Very Very much!!

Hi Frank,

- What kind of device you have?
- Did you try removing the battery and place them back after few minutes?

Give us the details of the device such as make & model.

--
Chins

"frank chen" <frank@ibegroup.com> wrote in message
news:1162561729.105187.229940@f16g2000cwb.googlegr oups.com...
>I wrote some codes to soft reset my ppc and ppc phone, but when soft
> reset the ppc phone, it can't start. The screen is white. Using the
> soft reset key can't do so!
> The device is belong to my boss.
> He will kill me !!!!]
> Can some one give me some advice?
> Thanks Very Very Very much!!
>

Sounds like you may have issued a hard reset or worse...

First think I would try (after a hardware/stylus soft reset) would be a
hard reset.

Beverly Howard [MS MVP-Mobile Devices]

"frank chen" <frank@ibegroup.com> wrote in message
news:1162561729.105187.229940@f16g2000cwb.googlegr oups.com...
>I wrote some codes to soft reset my ppc and ppc phone, but when soft
> reset the ppc phone, it can't start. The screen is white. Using the
> soft reset key can't do so!
> The device is belong to my boss.
> He will kill me !!!!]
> Can some one give me some advice?
> Thanks Very Very Very much!!
>


Well, you may be in luck, I had a screen stuck in all white yet was able to
pull files off of it. It is a longshot, but not out o fthe realm of
possibility.

First thing, see if you can hook it up to a host PC and get a connection
with Active Sync. IF so, read on. If not, skip down to "Finally"...

Now, if it is an ealier PPC you might be able to do a backup - do so if
possible. Keep this as a "possible" backup.

Second, do a manual copy of an custom data, notes, etc. through explorer.

Third, if that above worked do a sync on a computer that has no other
information on it.

Now, do a hard reset. Next, attempt to restore the possible backup, if
available. There is a chance that you will just re-create the issue, and if
so then hard reset again.

Next, if the backup did not exist (later device ) or if restore re-created
the problem, then sync with the computer above to restore the PIM items and
do a manual copy of the data, notes, etc.

Also, if you can get explorer access there are other backup tools that will
let you select what to back up, and a timed demo will help you in this case.

Finally, if you cannot get access at all then I forsee a hard reset. In the
future make a backup BEFORE trying out custom code. But for now see if the
owner has a reasonable backup. Also the PIM data on his host PC (if
available) might be enough to get it back in functioning order, assuming
that they do not use a lot of thrid party apps with seperate data stores.
Sounds like the only extras might be the ones you installed, so might be the
best judge of that.

Finally, good luck.

My advice, don;t put any more code on your bosses PPC ;)

Mitch


"frank chen" <frank@ibegroup.com> wrote in message
news:1162561729.105187.229940@f16g2000cwb.googlegr oups.com...
>I wrote some codes to soft reset my ppc and ppc phone, but when soft
> reset the ppc phone, it can't start. The screen is white. Using the
> soft reset key can't do so!
> The device is belong to my boss.
> He will kill me !!!!]
> Can some one give me some advice?
> Thanks Very Very Very much!!
>

Thanks very much for all advice I have resolved it, I asked boss for
anther battery, and softreset!
That's OK!
My boss said if the datum in the device lost, I will kill him,haha!

xTenn 写道：

> "frank chen" <frank@ibegroup.com> wrote in message
> news:1162561729.105187.229940@f16g2000cwb.googlegr oups.com...
> >I wrote some codes to soft reset my ppc and ppc phone, but when soft
> > reset the ppc phone, it can't start. The screen is white. Using the
> > soft reset key can't do so!
> > The device is belong to my boss.
> > He will kill me !!!!]
> > Can some one give me some advice?
> > Thanks Very Very Very much!!
> >
>
>
> Well, you may be in luck, I had a screen stuck in all white yet was able to
> pull files off of it. It is a longshot, but not out o fthe realm of
> possibility.
>
> First thing, see if you can hook it up to a host PC and get a connection
> with Active Sync. IF so, read on. If not, skip down to "Finally"...
>
> Now, if it is an ealier PPC you might be able to do a backup - do so if
> possible. Keep this as a "possible" backup.
>
> Second, do a manual copy of an custom data, notes, etc. through explorer.
>
> Third, if that above worked do a sync on a computer that has no other
> information on it.
>
> Now, do a hard reset. Next, attempt to restore the possible backup, if
> available. There is a chance that you will just re-create the issue, andif
> so then hard reset again.
>
> Next, if the backup did not exist (later device ) or if restore re-created
> the problem, then sync with the computer above to restore the PIM items and
> do a manual copy of the data, notes, etc.
>
> Also, if you can get explorer access there are other backup tools that will
> let you select what to back up, and a timed demo will help you in this case.
>
> Finally, if you cannot get access at all then I forsee a hard reset. In the
> future make a backup BEFORE trying out custom code. But for now see if the
> owner has a reasonable backup. Also the PIM data on his host PC (if
> available) might be enough to get it back in functioning order, assuming
> that they do not use a lot of thrid party apps with seperate data stores.
> Sounds like the only extras might be the ones you installed, so might be the
> best judge of that.
>
> Finally, good luck.