I was running Internet Explorer 7.0 with no issues Then the other day I had
to re install windows XP long story but I finally got back to my original
spot with all the updates installed. But now I had Internet Explorer 6.0. I
thought that it would be know trouble to re install IE 7.0 but I was wrong.
I keep getting error 0x5 and the system has to reboot and Internet explorer
6.0 is back part of the log file is below. I have checked your message area
and really have found no direct solution. I Have Norton Internet Security
2006 with all updates Running on machine but I have turned it off and tried
to intall did not help, I also tried downloading the file to my desktop and
then booted into windows safe mode with networking and tried to install
thinking norton's was causing a problem some where along the line, but that
did not help. I have read about some small programs you can download which
will check registry entrees that are preventing writing to, but I think that
is extreme. I have tried several place at your web site to get answer with
out much success. I have Firefox the newest version which runs without no
problems. Also I have run virus scans on line along with Adware to make sure
no spyware issue or viruses. Everything on computer is up to date and I have
Linksys router for hardware firewall.
Below is the log file I am getting any help would be much appreciated.
PS since I tried to install internet Explorer 7.0 and then the program
tried to roll back to 6.0 , IE will not run properly It will open up but if
you click a favorite it crashes locks up. Also I followed the
troubleshooting link once I had rebooted for troubleshooting IE7 but none of
these solutions seem to be the problem.



73.625: Copied file (delayed): C:\WINDOWS\system32\en-US\SETF4.tmp
73.625: MyMakePerFileExceptionA: MakePerFileException failed; error=0x6ba.
73.625: Copied file: C:\WINDOWS\system32\en-US\inseng.dll.mui
73.688: Copied file (delayed): C:\WINDOWS\system32\en-US\SETF5.tmp
73.782: DoInstallation: Installing assemblies with source root path:
c:\e5220848ead6a90a0dfaddb8747a\
73.782: Num Ticks for Copying files : 11141
82.407: DoRegistryUpdates:UpdSpInstallFromInfSection Failed for
ProductInstall.GlobalRegistryChanges.Install error: 0x5
82.407: INF_REGISTRY Failed
82.407: DoInstallation:DoRegistryUpdates failed
82.438: Access is denied.
82.438: Internet Explorer 7 installation did not complete.

Select 'OK' to undo the changes that have been made.
82.438: Starting process: C:\WINDOWS\ie7\spuninst\spuninst.exe /~ -q -z
120.938: Software Update Rollback has completed with return code 0xbc2.
This rollback requires a reboot.
120.954: Internet Explorer 7 installation did not complete.

Internet Explorer 7 has been partially updated and may not work properly.
120.954: Update.exe extended error code = 0x5
0.250:
================================================== ==============================
0.266: 2007/07/15 18:45:29.468 (local)
0.266: i:\dfd5d56c3a9d150177cd68d995f655a6\update\update. exe (version
6.2.29.0)
0.281: Hotfix started with following command line: /quiet /norestart /er
/log:C:\WINDOWS
1.766: IECUSTOM: Scanning for proper registry permissions...
3.391: IECUSTOM: Scanning for proper registry permissions...
3.656: IECUSTOM: Scanning for proper registry permissions...
7.906: In Function TestVolatileFlag, line 11873, RegOpenKeyEx failed with
error 0x2
7.906: In Function TestVolatileFlag, line 11905, RegOpenKeyEx failed w

1. How to perform a repair installation of Windows XP if Internet Explorer 7
is installed:
http://support.microsoft.com/kb/917964

Did you consult the KB article above and follow its recommendations when you
"reinstalled" WinXP?

2. Required reading IMHO before installing IE7:

Sandi's Installation Tips <= FOLLOW THESE TIPS TO THE LETTER!
http://www.ie-vista.com/known_issues.html#pre-install

[And I strongly recommend using
http://www.microsoft.com/windows/ie/default.mspx as the installation source,
not Automatic/Windows Update.]

IEBlog : IE7 Installation and Anti-Malware Applications
http://blogs.msdn.com/ie/archive/200...lications.aspx
--
~Robear Dyer (PA Bear)
MS MVP-Windows (IE, OE, Security, Shell/User)
AumHa VSOP & Admin; DTS-L.org

shocky wrote:
> I was running Internet Explorer 7.0 with no issues Then the other day I
> had
> to re install windows XP long story but I finally got back to my original
> spot with all the updates installed. But now I had Internet Explorer 6.0.
> I thought that it would be know trouble to re install IE 7.0 but I was
> wrong. I keep getting error 0x5 and the system has to reboot and Internet
> explorer
> 6.0 is back part of the log file is below. I have checked your message
> area
> and really have found no direct solution. I Have Norton Internet Security
> 2006 with all updates Running on machine but I have turned it off and
> tried
> to intall did not help, I also tried downloading the file to my desktop
> and
> then booted into windows safe mode with networking and tried to install
> thinking norton's was causing a problem some where along the line, but
> that
> did not help. I have read about some small programs you can download
> which
> will check registry entrees that are preventing writing to, but I think
> that
> is extreme. I have tried several place at your web site to get answer
> with
> out much success. I have Firefox the newest version which runs without no
> problems. Also I have run virus scans on line along with Adware to make
> sure no spyware issue or viruses. Everything on computer is up to date
> and
> I have Linksys router for hardware firewall.
> Below is the log file I am getting any help would be much appreciated.
> PS since I tried to install internet Explorer 7.0 and then the program
> tried to roll back to 6.0 , IE will not run properly It will open up but
> if
> you click a favorite it crashes locks up. Also I followed the
> troubleshooting link once I had rebooted for troubleshooting IE7 but none
> of
> these solutions seem to be the problem.
>
>
>
> 73.625: Copied file (delayed): C:\WINDOWS\system32\en-US\SETF4.tmp
> 73.625: MyMakePerFileExceptionA: MakePerFileException failed; error=0x6ba.
> 73.625: Copied file: C:\WINDOWS\system32\en-US\inseng.dll.mui
> 73.688: Copied file (delayed): C:\WINDOWS\system32\en-US\SETF5.tmp
> 73.782: DoInstallation: Installing assemblies with source root path:
> c:\e5220848ead6a90a0dfaddb8747a\
> 73.782: Num Ticks for Copying files : 11141
> 82.407: DoRegistryUpdates:UpdSpInstallFromInfSection Failed for
> ProductInstall.GlobalRegistryChanges.Install error: 0x5
> 82.407: INF_REGISTRY Failed
> 82.407: DoInstallation:DoRegistryUpdates failed
> 82.438: Access is denied.
> 82.438: Internet Explorer 7 installation did not complete.
>
> Select 'OK' to undo the changes that have been made.
> 82.438: Starting process: C:\WINDOWS\ie7\spuninst\spuninst.exe /~ -q -z
> 120.938: Software Update Rollback has completed with return code 0xbc2.
> This rollback requires a reboot.
> 120.954: Internet Explorer 7 installation did not complete.
>
> Internet Explorer 7 has been partially updated and may not work properly.
> 120.954: Update.exe extended error code = 0x5
> 0.250:
> ================================================== ==============================
> 0.266: 2007/07/15 18:45:29.468 (local)
> 0.266: i:\dfd5d56c3a9d150177cd68d995f655a6\update\update. exe (version
> 6.2.29.0)
> 0.281: Hotfix started with following command line: /quiet /norestart /er
> /log:C:\WINDOWS
> 1.766: IECUSTOM: Scanning for proper registry permissions...
> 3.391: IECUSTOM: Scanning for proper registry permissions...
> 3.656: IECUSTOM: Scanning for proper registry permissions...
> 7.906: In Function TestVolatileFlag, line 11873, RegOpenKeyEx failed with
> error 0x2
> 7.906: In Function TestVolatileFlag, line 11905, RegOpenKeyEx failed w

Hi,

To resolve this issue, restart your computer in safe mode and try installing.

For additional information about how to start your computer in Safe mode,
click the
following article number to view the article in the Microsoft Knowledge Base:

A description of the Safe Mode Boot options in Windows XP
http://support.microsoft.com/kb/315222

Thanks,
Anish

"shocky" wrote:

> I was running Internet Explorer 7.0 with no issues Then the other day I had
> to re install windows XP long story but I finally got back to my original
> spot with all the updates installed. But now I had Internet Explorer 6.0. I
> thought that it would be know trouble to re install IE 7.0 but I was wrong.
> I keep getting error 0x5 and the system has to reboot and Internet explorer
> 6.0 is back part of the log file is below. I have checked your message area
> and really have found no direct solution. I Have Norton Internet Security
> 2006 with all updates Running on machine but I have turned it off and tried
> to intall did not help, I also tried downloading the file to my desktop and
> then booted into windows safe mode with networking and tried to install
> thinking norton's was causing a problem some where along the line, but that
> did not help. I have read about some small programs you can download which
> will check registry entrees that are preventing writing to, but I think that
> is extreme. I have tried several place at your web site to get answer with
> out much success. I have Firefox the newest version which runs without no
> problems. Also I have run virus scans on line along with Adware to make sure
> no spyware issue or viruses. Everything on computer is up to date and I have
> Linksys router for hardware firewall.
> Below is the log file I am getting any help would be much appreciated.
> PS since I tried to install internet Explorer 7.0 and then the program
> tried to roll back to 6.0 , IE will not run properly It will open up but if
> you click a favorite it crashes locks up. Also I followed the
> troubleshooting link once I had rebooted for troubleshooting IE7 but none of
> these solutions seem to be the problem.
>
>
>
> 73.625: Copied file (delayed): C:\WINDOWS\system32\en-US\SETF4.tmp
> 73.625: MyMakePerFileExceptionA: MakePerFileException failed; error=0x6ba.
> 73.625: Copied file: C:\WINDOWS\system32\en-US\inseng.dll.mui
> 73.688: Copied file (delayed): C:\WINDOWS\system32\en-US\SETF5.tmp
> 73.782: DoInstallation: Installing assemblies with source root path:
> c:\e5220848ead6a90a0dfaddb8747a\
> 73.782: Num Ticks for Copying files : 11141
> 82.407: DoRegistryUpdates:UpdSpInstallFromInfSection Failed for
> ProductInstall.GlobalRegistryChanges.Install error: 0x5
> 82.407: INF_REGISTRY Failed
> 82.407: DoInstallation:DoRegistryUpdates failed
> 82.438: Access is denied.
> 82.438: Internet Explorer 7 installation did not complete.
>
> Select 'OK' to undo the changes that have been made.
> 82.438: Starting process: C:\WINDOWS\ie7\spuninst\spuninst.exe /~ -q -z
> 120.938: Software Update Rollback has completed with return code 0xbc2.
> This rollback requires a reboot.
> 120.954: Internet Explorer 7 installation did not complete.
>
> Internet Explorer 7 has been partially updated and may not work properly.
> 120.954: Update.exe extended error code = 0x5
> 0.250:
> ================================================== ==============================
> 0.266: 2007/07/15 18:45:29.468 (local)
> 0.266: i:\dfd5d56c3a9d150177cd68d995f655a6\update\update. exe (version
> 6.2.29.0)
> 0.281: Hotfix started with following command line: /quiet /norestart /er
> /log:C:\WINDOWS
> 1.766: IECUSTOM: Scanning for proper registry permissions...
> 3.391: IECUSTOM: Scanning for proper registry permissions...
> 3.656: IECUSTOM: Scanning for proper registry permissions...
> 7.906: In Function TestVolatileFlag, line 11873, RegOpenKeyEx failed with
> error 0x2
> 7.906: In Function TestVolatileFlag, line 11905, RegOpenKeyEx failed w

I believe you need IE6 SP2 in order to install IE7 on XP
http://www.microsoft.com/uk/windows/...s/default.mspx

You can order an SP2 Cd from this site if you can't get into Windows Updates
to download

http://www.microsoft.com/windowsxp/sp2/default.mspx

--
Gistcheckin


"shocky" wrote:

> I was running Internet Explorer 7.0 with no issues Then the other day I had
> to re install windows XP long story but I finally got back to my original
> spot with all the updates installed. But now I had Internet Explorer 6.0. I
> thought that it would be know trouble to re install IE 7.0 but I was wrong.
> I keep getting error 0x5 and the system has to reboot and Internet explorer
> 6.0 is back part of the log file is below. I have checked your message area
> and really have found no direct solution. I Have Norton Internet Security
> 2006 with all updates Running on machine but I have turned it off and tried
> to intall did not help, I also tried downloading the file to my desktop and
> then booted into windows safe mode with networking and tried to install
> thinking norton's was causing a problem some where along the line, but that
> did not help. I have read about some small programs you can download which
> will check registry entrees that are preventing writing to, but I think that
> is extreme. I have tried several place at your web site to get answer with
> out much success. I have Firefox the newest version which runs without no
> problems. Also I have run virus scans on line along with Adware to make sure
> no spyware issue or viruses. Everything on computer is up to date and I have
> Linksys router for hardware firewall.
> Below is the log file I am getting any help would be much appreciated.
> PS since I tried to install internet Explorer 7.0 and then the program
> tried to roll back to 6.0 , IE will not run properly It will open up but if
> you click a favorite it crashes locks up. Also I followed the
> troubleshooting link once I had rebooted for troubleshooting IE7 but none of
> these solutions seem to be the problem.
>
>
>
> 73.625: Copied file (delayed): C:\WINDOWS\system32\en-US\SETF4.tmp
> 73.625: MyMakePerFileExceptionA: MakePerFileException failed; error=0x6ba.
> 73.625: Copied file: C:\WINDOWS\system32\en-US\inseng.dll.mui
> 73.688: Copied file (delayed): C:\WINDOWS\system32\en-US\SETF5.tmp
> 73.782: DoInstallation: Installing assemblies with source root path:
> c:\e5220848ead6a90a0dfaddb8747a\
> 73.782: Num Ticks for Copying files : 11141
> 82.407: DoRegistryUpdates:UpdSpInstallFromInfSection Failed for
> ProductInstall.GlobalRegistryChanges.Install error: 0x5
> 82.407: INF_REGISTRY Failed
> 82.407: DoInstallation:DoRegistryUpdates failed
> 82.438: Access is denied.
> 82.438: Internet Explorer 7 installation did not complete.
>
> Select 'OK' to undo the changes that have been made.
> 82.438: Starting process: C:\WINDOWS\ie7\spuninst\spuninst.exe /~ -q -z
> 120.938: Software Update Rollback has completed with return code 0xbc2.
> This rollback requires a reboot.
> 120.954: Internet Explorer 7 installation did not complete.
>
> Internet Explorer 7 has been partially updated and may not work properly.
> 120.954: Update.exe extended error code = 0x5
> 0.250:
> ================================================== ==============================
> 0.266: 2007/07/15 18:45:29.468 (local)
> 0.266: i:\dfd5d56c3a9d150177cd68d995f655a6\update\update. exe (version
> 6.2.29.0)
> 0.281: Hotfix started with following command line: /quiet /norestart /er
> /log:C:\WINDOWS
> 1.766: IECUSTOM: Scanning for proper registry permissions...
> 3.391: IECUSTOM: Scanning for proper registry permissions...
> 3.656: IECUSTOM: Scanning for proper registry permissions...
> 7.906: In Function TestVolatileFlag, line 11873, RegOpenKeyEx failed with
> error 0x2
> 7.906: In Function TestVolatileFlag, line 11905, RegOpenKeyEx failed w

"Anish" wrote:

> Hi,
>
> To resolve this issue, restart your computer in safe mode and try installing.
>
> For additional information about how to start your computer in Safe mode,
> click the
> following article number to view the article in the Microsoft Knowledge Base:
>
> A description of the Safe Mode Boot options in Windows XP
> http://support.microsoft.com/kb/315222
>
> Thanks,
> Anish
>
> "shocky" wrote:
>
> > I was running Internet Explorer 7.0 with no issues Then the other day I had
> > to re install windows XP long story but I finally got back to my original
> > spot with all the updates installed. But now I had Internet Explorer 6.0. I
> > thought that it would be know trouble to re install IE 7.0 but I was wrong.
> > I keep getting error 0x5 and the system has to reboot and Internet explorer
> > 6.0 is back part of the log file is below. I have checked your message area
> > and really have found no direct solution. I Have Norton Internet Security
> > 2006 with all updates Running on machine but I have turned it off and tried
> > to intall did not help, I also tried downloading the file to my desktop and
> > then booted into windows safe mode with networking and tried to install
> > thinking norton's was causing a problem some where along the line, but that
> > did not help. I have read about some small programs you can download which
> > will check registry entrees that are preventing writing to, but I think that
> > is extreme. I have tried several place at your web site to get answer with
> > out much success. I have Firefox the newest version which runs without no
> > problems. Also I have run virus scans on line along with Adware to make sure
> > no spyware issue or viruses. Everything on computer is up to date and I have
> > Linksys router for hardware firewall.
> > Below is the log file I am getting any help would be much appreciated.
> > PS since I tried to install internet Explorer 7.0 and then the program
> > tried to roll back to 6.0 , IE will not run properly It will open up but if
> > you click a favorite it crashes locks up. Also I followed the
> > troubleshooting link once I had rebooted for troubleshooting IE7 but none of
> > these solutions seem to be the problem.
> >
> >
> >
> > 73.625: Copied file (delayed): C:\WINDOWS\system32\en-US\SETF4.tmp
> > 73.625: MyMakePerFileExceptionA: MakePerFileException failed; error=0x6ba.
> > 73.625: Copied file: C:\WINDOWS\system32\en-US\inseng.dll.mui
> > 73.688: Copied file (delayed): C:\WINDOWS\system32\en-US\SETF5.tmp
> > 73.782: DoInstallation: Installing assemblies with source root path:
> > c:\e5220848ead6a90a0dfaddb8747a\
> > 73.782: Num Ticks for Copying files : 11141
> > 82.407: DoRegistryUpdates:UpdSpInstallFromInfSection Failed for
> > ProductInstall.GlobalRegistryChanges.Install error: 0x5
> > 82.407: INF_REGISTRY Failed
> > 82.407: DoInstallation:DoRegistryUpdates failed
> > 82.438: Access is denied.
> > 82.438: Internet Explorer 7 installation did not complete.
> >
> > Select 'OK' to undo the changes that have been made.
> > 82.438: Starting process: C:\WINDOWS\ie7\spuninst\spuninst.exe /~ -q -z
> > 120.938: Software Update Rollback has completed with return code 0xbc2.
> > This rollback requires a reboot.
> > 120.954: Internet Explorer 7 installation did not complete.
> >
> > Internet Explorer 7 has been partially updated and may not work properly.
> > 120.954: Update.exe extended error code = 0x5
> > 0.250:
> > ================================================== ==============================
> > 0.266: 2007/07/15 18:45:29.468 (local)
> > 0.266: i:\dfd5d56c3a9d150177cd68d995f655a6\update\update. exe (version
> > 6.2.29.0)
> > 0.281: Hotfix started with following command line: /quiet /norestart /er
> > /log:C:\WINDOWS
> > 1.766: IECUSTOM: Scanning for proper registry permissions...
> > 3.391: IECUSTOM: Scanning for proper registry permissions...
> > 3.656: IECUSTOM: Scanning for proper registry permissions...
> > 7.906: In Function TestVolatileFlag, line 11873, RegOpenKeyEx failed with
> > error 0x2
> > 7.906: In Function TestVolatileFlag, line 11905, RegOpenKeyEx failed w



I already tried to install IE7.0 in safe mode with networking did not work
for me

I also have XP home edition with SP2 installed all windows updates except ie 7