Technology Questions

Go Back   Technology Questions > Manufacturer Questions > Manufacturers > Apple > Apple Macintosh Hardware

Apple Macintosh Hardware Discuss the Apple Macintosh Hardware

Reply
 
LinkBack Thread Tools
  #1 (permalink)  
Old 02-06-2007, 06:42 PM
Serge L
Newsgroup Contributor
 
Posts: n/a
Help me please ! Problem with G3/266 I get this message to theupper left corner "" UNKNOWN_WORD ""

Hi,

After the installation of MAC OS X (PUMA - version 10) when I start the
system, I heard the mac sound and I get this message to the upper left
corner "" UNKNOWN_WORD "" this message is on a grey background.

I change no part the only think I did

- erase the hard disk
- partition the hard disk in two parts
- Install MAC OS X PUMA on one

The keyboard and mouse seems to be freezy

I tried booting the system with a SOS 3.5 disk utilities and with a bootCD
with the system 9.1...nothing happen's The disk drive turn for 30 sec. but
doesn't boot at all. Always get this message to the upper left corner ""
UNKNOWN_WORD ""

WHAT CAN I DO !

Help me please ! Problem with G3/266

Thanks for help, I'll very appréciate


SL

Help me please ! Problem with G3/266 I get this message to the upper left
corner "" UNKNOWN_WORD ""

Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote

 
Old 02-06-2007, 06:42 PM
  #2 (permalink)  
Old 02-06-2007, 06:42 PM
Malcolm
Newsgroup Contributor
 
Posts: n/a
Re: Help me please ! Problem with G3/266 I get this message to the upper left corner "" UNKNOWN_WORD ""

On 2005-10-19 13:30:17 -0400, Serge L <xpressweb********.com> said:

> Hi,
>
> After the installation of MAC OS X (PUMA - version 10) when I start the
> system, I heard the mac sound and I get this message to the upper left
> corner "" UNKNOWN_WORD "" this message is on a grey background.
>
> I change no part the only think I did
>
> - erase the hard disk
> - partition the hard disk in two parts
> - Install MAC OS X PUMA on one
>
> The keyboard and mouse seems to be freezy
>
> I tried booting the system with a SOS 3.5 disk utilities and with a bootCD
> with the system 9.1...nothing happen's The disk drive turn for 30 sec. but
> doesn't boot at all. Always get this message to the upper left corner ""
> UNKNOWN_WORD ""
>
> WHAT CAN I DO !
>
> Help me please ! Problem with G3/266
>
> Thanks for help, I'll very appréciate
>
>
> SL
>
> Help me please ! Problem with G3/266 I get this message to the upper left
> corner "" UNKNOWN_WORD ""


Did you try a PRAM reset? At power on, hold down Apple, P, and R until
the tone sounds three times.

Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote

  #3 (permalink)  
Old 02-06-2007, 06:42 PM
Malcolm
Newsgroup Contributor
 
Posts: n/a
Re: Help me please ! Problem with G3/266 I get this message to the upper left corner "" UNKNOWN_WORD ""

On 2005-10-19 13:30:17 -0400, Serge L <xpressweb********.com> said:

> Hi,
>
> After the installation of MAC OS X (PUMA - version 10) when I start the
> system, I heard the mac sound and I get this message to the upper left
> corner "" UNKNOWN_WORD "" this message is on a grey background.
>
> I change no part the only think I did
>
> - erase the hard disk
> - partition the hard disk in two parts
> - Install MAC OS X PUMA on one
>
> The keyboard and mouse seems to be freezy
>
> I tried booting the system with a SOS 3.5 disk utilities and with a bootCD
> with the system 9.1...nothing happen's The disk drive turn for 30 sec. but
> doesn't boot at all. Always get this message to the upper left corner ""
> UNKNOWN_WORD ""
>
> WHAT CAN I DO !
>
> Help me please ! Problem with G3/266
>
> Thanks for help, I'll very appréciate
>
>
> SL
>
> Help me please ! Problem with G3/266 I get this message to the upper left
> corner "" UNKNOWN_WORD ""


Did you try a PRAM reset? At power on, hold down Apple, P, and R until
the tone sounds three times.

Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote

  #4 (permalink)  
Old 02-06-2007, 06:47 PM
Howard S Shubs
Newsgroup Contributor
 
Posts: n/a
Go **** you asshole Re: Help me please ! Problem with G3/266 I get this message to the upper left corner "" UNKNOWN_WORD "" (was: Help me please ! Problem with G3/266 I get this message to the upper left corner "" UN

On Wed, 19 Oct 2005 13:30:17 -0400, Serge L wrote:

> Hi,
>
> After the installation of MAC OS X (PUMA - version 10) when I start the
> system, I heard the mac sound and I get this message to the upper left
> corner "" UNKNOWN_WORD "" this message is on a grey background.
>
> I change no part the only think I did
>
> - erase the hard disk
> - partition the hard disk in two parts
> - Install MAC OS X PUMA on one
>
> The keyboard and mouse seems to be freezy
>
> I tried booting the system with a SOS 3.5 disk utilities and with a bootCD
> with the system 9.1...nothing happen's The disk drive turn for 30 sec. but
> doesn't boot at all. Always get this message to the upper left corner ""
> UNKNOWN_WORD ""
>
> WHAT CAN I DO !
>
> Help me please ! Problem with G3/266
>
> Thanks for help, I'll very appréciate
>
>
> SL
>
> Help me please ! Problem with G3/266 I get this message to the upper left
> corner "" UNKNOWN_WORD ""


Stay out of the smart newsgroups, asswhipe.




--
A few minutes ago I attempted to give a flying fsck, but the best I
could do was to watch it skitter across the floor. (Anthony de Boer)









































_________________________________________
Usenet Zone Free Binaries Usenet Server
More than 140,000 groups
Unlimited download
http://www.usenetzone.com to open account
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote

  #5 (permalink)  
Old 02-06-2007, 06:47 PM
Howard S Shubs
Newsgroup Contributor
 
Posts: n/a
Go **** you asshole Re: Help me please ! Problem with G3/266 I get this message to the upper left corner "" UNKNOWN_WORD "" (was: Help me please ! Problem with G3/266 I get this message to the upper left corner "" UN

On Wed, 19 Oct 2005 13:30:17 -0400, Serge L wrote:

> Hi,
>
> After the installation of MAC OS X (PUMA - version 10) when I start the
> system, I heard the mac sound and I get this message to the upper left
> corner "" UNKNOWN_WORD "" this message is on a grey background.
>
> I change no part the only think I did
>
> - erase the hard disk
> - partition the hard disk in two parts
> - Install MAC OS X PUMA on one
>
> The keyboard and mouse seems to be freezy
>
> I tried booting the system with a SOS 3.5 disk utilities and with a bootCD
> with the system 9.1...nothing happen's The disk drive turn for 30 sec. but
> doesn't boot at all. Always get this message to the upper left corner ""
> UNKNOWN_WORD ""
>
> WHAT CAN I DO !
>
> Help me please ! Problem with G3/266
>
> Thanks for help, I'll very appréciate
>
>
> SL
>
> Help me please ! Problem with G3/266 I get this message to the upper left
> corner "" UNKNOWN_WORD ""


Stay out of the smart newsgroups, asswhipe.




--
A few minutes ago I attempted to give a flying fsck, but the best I
could do was to watch it skitter across the floor. (Anthony de Boer)









































_________________________________________
Usenet Zone Free Binaries Usenet Server
More than 140,000 groups
Unlimited download
http://www.usenetzone.com to open account
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote

Reply

Bookmarks

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
changing "opens with" settings does not apply to "open" or "print"commands Anne Rensonnet Windows XP 1 07-07-2008 05:20 AM
Why do emails sent from PDA have no "To" or "Subject" in "Sentitems" folder on Exchange server? Michael Levin Pocket PC General 0 05-27-2008 04:30 AM
Vista not wotking with "My Computer" or "Control Panel", "Screen Saver" Platebanger Windows Vista 6 02-05-2008 07:00 AM
WM5 Sync with Vista "Windows Calender", "Contacts", and "Mail" Tony Windows Vista 1 02-16-2007 04:31 PM
Remove "Edit", "Print", "Preview" from context menu Mo Windows XP 0 01-04-2007 03:40 AM


New To Technology Questions? Do You Need Help with Your Computer or Device? Do You Need Help with this site?

All times are GMT -8. The time now is 01:37 AM.


2003 - 2009 All Rights Reserved. Technology Questions

Search Engine Friendly URLs by vBSEO 3.3.0