I tried them all, mine worked beast at '10 mpbs half duplex,' your mileage
may vary.

--
Was this helpful? Then click the Ratings button. Voting helps the web
interface.
[url]http://www.microsoft.com/wn3/locales/help/help_en-us.htm#RateAPostAsAnswer[/url]
Mark L. Ferguson
..

"※James~小狗※" <james@james.com> wrote in message
news:#pwWUOtjIHA.5088@TK2MSFTNGP02.phx.gbl...[color=blue]
> in my ethernet device I see serveral option ranging from
> 1000 Mbps full to 10 Mbps half
>
> I know that my network card only goes up to 100
> should I set it as 100Mbps half then ?
> what's the diference between half and full ?
>
> cheers : )
>
> --
> [url]www.james-ho.com[/url]
> [url]news://news.balabu.net/balaboy.james[/url]
> 有事找我.
> "Mark L. Ferguson" <MarkLFerguson@discussions.microsoft.com> wrote in
> message news:CCDCE196-C5C5-4646-9F9E-97F4FBC96873@microsoft.com...[color=green]
>>I have no prob with Bob C's advice, but it didn't work for my system. I
>>had
>> to set the Properties of the Ethernet device, in device manager, to '10
>> Mpbs
>> half duplex' to get the speed up. YMMV, I would try changing to several
>> speeds to see what works best.
>> --
>> Was this helpful? Then click the "Yes" Ratings button. Voting helps the
>> web
>> interface. [url]http://www.microsoft.com/wn3/locales/help/help_en-us.htm[/url] see
>> ''rate a post''
>>
>> Mark L. Ferguson
>>
>>
>> "NB" wrote:
>>[color=darkred]
>>> I loaded Vista SP1 on three different computers. Two at home and one at
>>> work.
>>>
>>> I have experienced major reductions in file copy performance over the
>>> network.
>>>
>>> At work, my Vista x64 SP1 station has seen an 18 to 20 fold reduction in
>>> network file copy performance between some servers. The reduction in
>>> performance is from about 40 MB/s to 600 KB/s between certain Win2K3
>>> servers.
>>>
>>> At home, I have three Vista x64 systems. Two have SP1 and one does not.
>>> Copying files from one Vista SP1 system to the other SP1 system has seen
>>> a
>>> 20 fold reduction in performance after SP1, however the performance
>>> reduction
>>> is only in one direction. If I copy files TO the other machine, it's
>>> slow,
>>> but if I copy files FROM the other machine, it's very fast. After SP1,
>>> the
>>> speed was reduced from about 80 MB/s to less than 5 MB/s. I have no
>>> performance issues copying to or from the non-SP1 machine from the other
>>> SP1
>>> machines.
>>>
>>> Of course, this is totally unacceptable and I cannot run the machines
>>> like
>>> that. I have uninstalled SP1 from my work machine and now it's fine
>>> again.
>>>
>>> At home, I've messed with it for days, trying all kinds of different
>>> suggestions, drivers, registry hacks, and even tried different network
>>> cards
>>> to no avail.
>>>
>>> If I cannot fix these network performance issues, I won't be able to use
>>> SP1.
>>> I'm really at a loss and grasping at straws here.
>>>
>>> Does anyone have any ideas?[/color][/color]
>[/color]