You don't - You just plug it in to use it, and moments after you are
finished, just pull it out. Most people have no practical use for the Safely
Remove feature. It is primarily for use with delayed write on disks, to make
sure it's all clear before unplugging. But the default for all disks is not
to use it, so there is no need for it.

Never use it with flash drives or other such gadgets. Good luck.


"Max" <Max@discussions.microsoft.com> wrote in message
news:2EBA16F3-8076-4EF3-A0A9-32F80423B32B@microsoft.com...[color=blue]
> Hi Wandering.
>
> I might have done that. How can I identify which is the driver for the
> card
> reader and how do I go about deleting it safely?
>
> "Wandering" wrote:
>[color=green]
>> Did you use Safely Remove on the card before pulling it out? If so you
>> have
>> actually removed the Card Reader. You may have to delete the driver and
>> reinstall it.
>>
>>
>> "Max" <Max@discussions.microsoft.com> wrote in message
>> news:785F2630-6ED2-4262-B5C4-2668122CF02A@microsoft.com...[color=darkred]
>> > Hi to all!!
>> >
>> > I really hope that you can help me.
>> >
>> > I have an HP Pavilion T730m computer running Vista Ultimate, 180 GB HD
>> > and
>> > 1
>> > GB of RAM. It has an internal 9 in 1 Memory Card Reader (SD, Compact
>> > Flash,
>> > XD, etc) with an USB 2.0 interface to plug usb devices like ipods, usb
>> > drives, etc.
>> >
>> > When I first installed Vista the internal card reader worked perfectly,
>> > I
>> > would just insert the card and/or the usb device and it would be
>> > recognized
>> > automatically. However after some Vista update, the card reader stopped
>> > working completely. Nothing happens if I insert a card in any of the
>> > slots
>> > or
>> > if I plug a usb device into the available usb port.
>> >
>> > I would really appreciate any and all help, since I would like to make
>> > this
>> > work again.
>> >
>> > Thanks
>> >
>> > Max[/color]
>>
>>[/color][/color]