Would replacing the RAM possibly fix the problem?

I do not know the make and model of my computer - do need to know the name
of the processor?

The CCTV is a SENTIENT Compact 4-Channel Digital Video Recorder
Code: N82GB
Made by Maplins Electronics UK

There is nothing written on the software CD.


"Gerry" wrote:

> Dave
>
> Background information on Stop Error message
> http://msdn2.microsoft.com/en-us/library/ms793437.aspx
>
> 0x00000050: PAGE_FAULT_IN_NONPAGED_AREA
> Requested data was not in memory. An invalid system memory address was
> referenced. Defective memory (including main memory, L2 RAM cache, video
> RAM) or incompatible software (including remote control and antivirus
> software) might cause this Stop message, as may other hardware problems
> (e.g., incorrect SCSI termination or a flawed PCI card).
> Source: http://aumha.org/a/stop.htm
>
> Have you made any recent changes to RAM memory? How mamany memory sticks
> are installed?
>
> What is your computer make and model?
>
> What is the make and model of the CCTV hardware and is there a name on
> the software CD?
>
>
> --
>
>
> Hope this helps.
>
> Gerry
> ~~~~
> FCA
> Stourport, England
> Enquire, plan and execute
> ~~~~~~~~~~~~~~~~~~~
>
>
> DaveP72 wrote:
> > Hi Gerry,
> >
> > Here are the error report details;
> >
> > A problem has been detected and windows has been shut down to prevent
> > damage to your computer
> >
> > PAGE_FAULT_IN_NONPAGED_AREA
> >
> > Technical Details;
> > ***STOP: 0X00000050 (0X80087000, 0X00000000, 0X847FD9DC, 0X00000000)
> >
> > I then tried booting in safe mode but it didn't make any difference.
> > I do not use any wireless devices.
> >
> > "Gerry" wrote:
> >
> >> Dave
> >>
> >> Please post a complete Stop Error report.
> >>
> >> Disable automatic restart on system failure. This should help by
> >> allowing time to write down the STOP code properly. Keep pressing
> >> the F8 key during Start-Up and select option - Disable automatic
> >> restart on system failure. Do not re-enable automatic restart on
> >> system failure.
> >>
> >> After posting the Stop Error report disconnect all hardware except
> >> keyboard, mouse and monitor? Try a boot to safe mode.
> >>
> >> Are the keyboard mouse and monitor wired or wireless?
> >>
> >> --
> >>
> >>
> >> Hope this helps.
> >>
> >> Gerry
> >> ~~~~
> >> FCA
> >> Stourport, England
> >> Enquire, plan and execute
> >> ~~~~~~~~~~~~~~~~~~~
> >>
> >>
> >>
> >> DaveP72 wrote:
> >>> Correction: I am using Windows XP Pro (not the home edition)
> >>>
> >>> "DaveP72" wrote:
> >>>
> >>>> My computer has unexpectedly crashed after installing a software CD
> >>>> that accompanied a piece of CCTV hardware. The software installed
> >>>> fine and I have been using the program fine until I needed to
> >>>> restart after my copy of Microsoft Outlook crashed. Now the
> >>>> computer is stuck in a start up loop!
> >>>>
> >>>> As as soon as I get to the Windows XP Home screen the computer
> >>>> restarts automatically and returns to the plain black screen.
> >>>>
> >>>> I have tried each one of the options Safe Mode, Safe Mode with
> >>>> Networking, Start Windows Normally, Last Known Good...all of which
> >>>> makes no difference.
> >>>>
> >>>> I have the original Windows XP Pro installation CD-ROM disc.
> >>>>
> >>>> Is it possible to start up from my installation disc?
> >>>>
> >>>> Thank you.
> >>>> Dave
>
>