Dave

Background information on Stop Error message
http://msdn2.microsoft.com/en-us/library/ms793437.aspx

0x00000050: PAGE_FAULT_IN_NONPAGED_AREA
Requested data was not in memory. An invalid system memory address was
referenced. Defective memory (including main memory, L2 RAM cache, video
RAM) or incompatible software (including remote control and antivirus
software) might cause this Stop message, as may other hardware problems
(e.g., incorrect SCSI termination or a flawed PCI card).
Source: http://aumha.org/a/stop.htm

Have you made any recent changes to RAM memory? How mamany memory sticks
are installed?

What is your computer make and model?

What is the make and model of the CCTV hardware and is there a name on
the software CD?


--


Hope this helps.

Gerry
~~~~
FCA
Stourport, England
Enquire, plan and execute
~~~~~~~~~~~~~~~~~~~


DaveP72 wrote:
> Hi Gerry,
>
> Here are the error report details;
>
> A problem has been detected and windows has been shut down to prevent
> damage to your computer
>
> PAGE_FAULT_IN_NONPAGED_AREA
>
> Technical Details;
> ***STOP: 0X00000050 (0X80087000, 0X00000000, 0X847FD9DC, 0X00000000)
>
> I then tried booting in safe mode but it didn't make any difference.
> I do not use any wireless devices.
>
> "Gerry" wrote:
>
>> Dave
>>
>> Please post a complete Stop Error report.
>>
>> Disable automatic restart on system failure. This should help by
>> allowing time to write down the STOP code properly. Keep pressing
>> the F8 key during Start-Up and select option - Disable automatic
>> restart on system failure. Do not re-enable automatic restart on
>> system failure.
>>
>> After posting the Stop Error report disconnect all hardware except
>> keyboard, mouse and monitor? Try a boot to safe mode.
>>
>> Are the keyboard mouse and monitor wired or wireless?
>>
>> --
>>
>>
>> Hope this helps.
>>
>> Gerry
>> ~~~~
>> FCA
>> Stourport, England
>> Enquire, plan and execute
>> ~~~~~~~~~~~~~~~~~~~
>>
>>
>>
>> DaveP72 wrote:
>>> Correction: I am using Windows XP Pro (not the home edition)
>>>
>>> "DaveP72" wrote:
>>>
>>>> My computer has unexpectedly crashed after installing a software CD
>>>> that accompanied a piece of CCTV hardware. The software installed
>>>> fine and I have been using the program fine until I needed to
>>>> restart after my copy of Microsoft Outlook crashed. Now the
>>>> computer is stuck in a start up loop!
>>>>
>>>> As as soon as I get to the Windows XP Home screen the computer
>>>> restarts automatically and returns to the plain black screen.
>>>>
>>>> I have tried each one of the options Safe Mode, Safe Mode with
>>>> Networking, Start Windows Normally, Last Known Good...all of which
>>>> makes no difference.
>>>>
>>>> I have the original Windows XP Pro installation CD-ROM disc.
>>>>
>>>> Is it possible to start up from my installation disc?
>>>>
>>>> Thank you.
>>>> Dave