Go into BIOS, there is a RAID selection. Just turn it on...

--
Randem Systems
Your Installation Specialist
The Top Inno Setup Script Generator
http://www.randem.com/innoscript.html
Disk Read Error Press Ctl+Alt+Del to Restart
http://www.randem.com/discus/message...tml?1236319938



"Douglashen" <Douglashen@discussions.microsoft.com> wrote in message
news:E2F0E9A0-2600-40FA-AB6B-BB1AAC708858@microsoft.com...
> Sounds logical to me. Now, how do I set up the drives?
>
> --
> Doug
>
>
> "sgopus" wrote:
>
>> most likely the raid controller was made active, but the raid drives
>> themselves were never set up, so all data was written to drive 1, just a
>> guess
>>
>> "Douglashen" wrote:
>>
>> > My Dell came with Raid1 implemented on it. I have never paid much
>> > attention
>> > to it as I use an offsite backup. Recently I looked at Drive 2 to see
>> > what
>> > was on it and discovered that it was empty. Disk properties show
>> > almost no
>> > usage at all where drive 1 is almost half full. This uses an Intel
>> > Raid
>> > drive and a system check says the controller is working normally.
>> > What's
>> > going on?