| Re: ntdll.dll tabtip.exe error after installing Sp2 I'm going to go off in a small, dark cave and think, Luca. 8-)
--
Chris H.
Microsoft Windows MVP/Tablet PC
Tablet Creations - http://nicecreations.us/
Associate Expert
Expert Zone - www.microsoft.com/windowsxp/expertzone
"Luca" <keysteal@libero.it> wrote in message
news:OuN7YjTwEHA.1292@TK2MSFTNGP10.phx.gbl...
> Yes I did it. Probably I must tell you a thing. I installed a MSDN version
> of Tablet Xp overwriting
> a previous version of Tablet Xp (not MSDN). It could be the reason of this
> system error? I don't think as
> if I remove Service Pack 2 everything is going well.
>
> "Chris H." <winxpnews********.com> ha scritto nel messaggio
> news:eyJ6mcTwEHA.1988@TK2MSFTNGP12.phx.gbl...
>> Those are the correct files, according to my installation here. Did you
>> run the regsrv32 portion we talked about previously at the Command Prompt
>> within that directory?
>>
>> This was: At the Command Prompt (within the C:\Program Files\Common
>> Files\Microsoft Shared\Ink enter "regsvr32 inkobj.dll" without the
>> quotation marks, then Enter and then "regsvr32 tpcps.dll" (without
>> quotes) then Enter again. Restart your machine after finishing each of
>> those two modifications to the Registry.
>> --
>> Chris H.
>> Microsoft Windows MVP/Tablet PC
>> Tablet Creations - http://nicecreations.us/
>> Associate Expert
>> Expert Zone - www.microsoft.com/windowsxp/expertzone
>>
>>
>>
>> "Luca" <keysteal@libero.it> wrote in message
>> news:uLCYsBTwEHA.2012@TK2MSFTNGP15.phx.gbl...
>>> Well Chris,
>>>
>>> It's a clean installation of Windows Xp Tablet so it's very hard to find
>>> it some viruses or adware, by the way
>>> I did it and I find two files suspect to be adware (but it was a backup
>>> copy of a previous installation). I removed them.
>>>
>>> These are informations about two files:
>>>
>>> Inkobj.Dll
>>>
>>> File Version: 2.7.2600.2180
>>>
>>> File Version: 2.7.2600.2180 (xpsp_sp2_rtm.040803-2158)
>>> Language: English (United States)
>>>
>>> TcpPs.Dll
>>>
>>> File Version: 1.0.2201.0
>>>
>>> File Version: 1.0.2201.0 (xpsp1.020828-1920)
>>> Language: English (United States)
>>>
>>> "Chris H." <winxpnews********.com> ha scritto nel messaggio
>>> news:eLPiWxRwEHA.2908@tk2msftngp13.phx.gbl...
>>>> Okay, perhaps we should take a wild stab at a different direction.
>>>> You're running anti-virus software, correct, with the latest
>>>> definitions? If so, please use that to do a thorough check of your
>>>> system.
>>>>
>>>> After you've done that, if you have parasite and Trojan detecting
>>>> software available, please update the definitions and then run those.
>>>> You may also be interested in the information on parasites and Trojans
>>>> here: www.aumha.org/secure.
>>>>
>>>> With all that out of the way - and the main reason I'm asking you to do
>>>> that - I would like you to go into Windows Explorer and locate and
>>>> verify the inkobj.dll and tpcps.dll files are in the folder at
>>>> C:\Program Files\Common Files\Microsoft Shared\Ink .
>>>>
>>>> When you find those files, please right-click each of them individually
>>>> and select Properties. Then tap the Version tab and in the Item name:
>>>> pane tap File Version. Right-click the result in the right pane and
>>>> select "Copy." Then paste that information into your response post here
>>>> for each of the files.
>>>> --
>>>> Chris H.
>>>> Microsoft Windows MVP/Tablet PC
>>>> Tablet Creations - http://nicecreations.us/
>>>> Associate Expert
>>>> Expert Zone - www.microsoft.com/windowsxp/expertzone
>>>>
>>>>
>>>> "Luca" <keysteal@libero.it> wrote in message
>>>> news:O$rhLdRwEHA.3096@TK2MSFTNGP14.phx.gbl...
>>>>> Hi Chris (again),
>>>>>
>>>>> it means that it's as before, so the table input is empty when Windows
>>>>> Xp starts, and when I login
>>>>> to the system and when I try to run the table input from the icon it
>>>>> returns with a system error (ntdll.dll
>>>>> and tabtip.exe). So, nothing has changed.
>>>>>
>>>>> "Chris H." <winxpnews********.com> ha scritto nel messaggio
>>>>> news:uaz4koOwEHA.2540@TK2MSFTNGP09.phx.gbl...
>>>>>> Luca, I'm only bothered that it isn't working correctly, and trying
>>>>>> to help you figure out what's wrong. Not to worry.
>>>>>>
>>>>>> When you say it "doesn't work" could you give me the exact details of
>>>>>> what happened? Did it fail with an error message? Did it not find
>>>>>> the files I said to run the Registry fixes on?
>>>>>>
>>>>>> If I don't have details - (1) I followed your instructions and (2)
>>>>>> this is what happened - I have no way of knowing which way to try
>>>>>> what next. 8-)
>>>>>> --
>>>>>> Chris H.
>>>>>> Microsoft Windows MVP/Tablet PC
>>>>>> Tablet Creations - http://nicecreations.us/
>>>>>> Associate Expert
>>>>>> Expert Zone - www.microsoft.com/windowsxp/expertzone
>>>>>>
>>>>>>
>>>>>> "Luca" <keysteal@libero.it> wrote in message
>>>>>> news:uHz6mkLwEHA.1564@TK2MSFTNGP09.phx.gbl...
>>>>>>> Don't be angry Chris, but it doesn't work.
>>>>>>> I don't realize what Service Pack 2 Install to not permit the
>>>>>>> correct functioning of Tablet Input.
>>>>>>>
>>>>>>> Let me know,
>>>>>>>
>>>>>>> - Luca -
>>>>>>>
>>>>>>> "Chris H." <winxpnews********.com> ha scritto nel messaggio
>>>>>>> news:u%23Z0sMGwEHA.2908@tk2msftngp13.phx.gbl...
>>>>>>>> Luca, perhaps we should try this: Go to the Command Prompt (you
>>>>>>>> can get there by doing "cmd" without the quotes from Start/Run),
>>>>>>>> then would you enter "regsvr32 inkobj.dll" without the quotation
>>>>>>>> marks, then Enter and then "regsvr32 tpcps.dll" (without quotes)
>>>>>>>> then Enter again. Restart your machine after finishing each of
>>>>>>>> those two modifications to the Registry.
>>>>>>>>
>>>>>>>> If this doesn't correct the situation, then I would suggest booting
>>>>>>>> into Safe Mode (F8 or the appropriate Tablet button on boot-up) so
>>>>>>>> no drivers are loaded, and no programs are running, then do a
>>>>>>>> reinstall of Windows XP SP2 and the Tablet PC Edition 2005 over the
>>>>>>>> top of what you have.
>>>>>>>>
>>>>>>>> This will not uninstall or wipe out any of your programs, but make
>>>>>>>> sure you've backed up your personal files just in case.
>>>>>>>> --
>>>>>>>> Chris H.
>>>>>>>> Microsoft Windows MVP/Tablet PC
>>>>>>>> Tablet Creations - http://nicecreations.us/
>>>>>>>> Associate Expert
>>>>>>>> Expert Zone - www.microsoft.com/windowsxp/expertzone
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> "Luca" <keysteal@libero.it> wrote in message
>>>>>>>> news:%23UAjcZFwEHA.3416@TK2MSFTNGP09.phx.gbl...
>>>>>>>>> Hi Chris,
>>>>>>>>>
>>>>>>>>> When I try to run mscorcfg.msc from Start/Run it simply says that
>>>>>>>>> it doesn't
>>>>>>>>> find any program with that name. So I must search it throught Hd
>>>>>>>>> and run it directly from
>>>>>>>>> its directory.
>>>>>>>>>
>>>>>>>>> I launch the Framework correctly from Administrative Tools.
>>>>>>>>>
>>>>>>>>> I make a mistake, I mean with appearing that the panel is
>>>>>>>>> displaying as a keyboard meanwhile now it's
>>>>>>>>> only a window without the keyboard. Empty.
>>>>>>>>>
>>>>>>>>> "Chris H." <winxpnews********.com> ha scritto nel messaggio
>>>>>>>>> news:uK2mpVDwEHA.824@TK2MSFTNGP11.phx.gbl...
>>>>>>>>>> We should go step-by-step on this. Are you getting any error
>>>>>>>>>> messages when you attempt to start mscorcfg.msc from Start/Run,
>>>>>>>>>> or is it just not responding? If you go to Start/Run and put in
>>>>>>>>>> "msc" without the quotes, then tap the OK button, does that
>>>>>>>>>> launch the Microsoft Management Console without error?
>>>>>>>>>>
>>>>>>>>>> If you go into Control Panel/Administrative Tools do you see the
>>>>>>>>>> Microsoft .NET Framework 1.1 Configuration shortcut in there?
>>>>>>>>>> Does it launch properly from that location?
>>>>>>>>>>
>>>>>>>>>> When you say the Tablet Input Panel "disappeared" could you
>>>>>>>>>> describe exactly what you're seeing? Are you saying there is no
>>>>>>>>>> icon in the Taskbar area from which to launch the TIP? Are you
>>>>>>>>>> saying it doesn't launch when you tap that icon?
>>>>>>>>>> --
>>>>>>>>>> Chris H.
>>>>>>>>>> Microsoft Windows MVP/Tablet PC
>>>>>>>>>> Tablet Creations - http://nicecreations.us/
>>>>>>>>>> Associate Expert
>>>>>>>>>> Expert Zone - www.microsoft.com/windowsxp/expertzone
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> "Luca" <keysteal@libero.it> wrote in message
>>>>>>>>>> news:O$KzHxCwEHA.3292@TK2MSFTNGP15.phx.gbl...
>>>>>>>>>>> Dear Chris,
>>>>>>>>>>>
>>>>>>>>>>> thank for you patience. I tried to start mscorcfg.msc from
>>>>>>>>>>> Start/Run but it didn't start.
>>>>>>>>>>> So I installed .Net 1.1 from Microsoft, and tried again to start
>>>>>>>>>>> .msc from Start/Run, but nothing.
>>>>>>>>>>> I made a search trought my HD and I found it in
>>>>>>>>>>> c:\windows\microsoft .net\etc. After Start it directly from the
>>>>>>>>>>> .Net
>>>>>>>>>>> folder I find the version 1.1.4322.573.
>>>>>>>>>>>
>>>>>>>>>>> By the way, after installed the Framework the problem hasn't
>>>>>>>>>>> been solved. I de-installed the Service Pack 2 and Tablet
>>>>>>>>>>> Input appears again, after re-installing Service Pack 2 it
>>>>>>>>>>> disappeared.
>>>>>>>>>>>
>>>>>>>>>>> Really, I don't understand where it is the problem.
>>>>>>>>>>>
>>>>>>>>>>> "Chris H." <winxpnews********.com> ha scritto nel messaggio
>>>>>>>>>>> news:urqDIk8vEHA.536@TK2MSFTNGP11.phx.gbl...
>>>>>>>>>>>> What version of .NET framework do you have installed? If you
>>>>>>>>>>>> go to Start/Run and put in "mscorcfg.msc" without the quotes,
>>>>>>>>>>>> are you able to access the .NET configuration tools. If you do
>>>>>>>>>>>> have .NET installed and this doesn't work, if may be corrupt
>>>>>>>>>>>> and need to be updated/reinstalled.
>>>>>>>>>>>>
>>>>>>>>>>>> If you have an early version installed, the .NET 1.1 Service
>>>>>>>>>>>> Pack 1 is available here
>>>>>>>>>>>> http://msdn.microsoft.com/netframework/ . Look under the
>>>>>>>>>>>> Framework Downloads link.
>>>>>>>>>>>> --
>>>>>>>>>>>> Chris H.
>>>>>>>>>>>> Microsoft Windows MVP/Tablet PC
>>>>>>>>>>>> Tablet Creations - http://nicecreations.us/
>>>>>>>>>>>> Associate Expert
>>>>>>>>>>>> Expert Zone - www.microsoft.com/windowsxp/expertzone
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> "Luca" <keysteal@libero.it> wrote in message
>>>>>>>>>>>> news:%23y$4dl6vEHA.2804@TK2MSFTNGP14.phx.gbl...
>>>>>>>>>>>>> Hi Chris,
>>>>>>>>>>>>>
>>>>>>>>>>>>> Nothing to do. I re-registered that two dlls, but nothing has
>>>>>>>>>>>>> changed. I saw details (in Advaced Text Services), and even if
>>>>>>>>>>>>> I have installed Office 2003, I see only that three Services
>>>>>>>>>>>>> you described in your last message and not four. I don't
>>>>>>>>>>>>> understand what is wrong.
>>>>>>>>>>>>>
>>>>>>>>>>>>> "Chris H." <winxpnews********.com> ha scritto nel messaggio
>>>>>>>>>>>>> news:<Ongvot2vEHA.1300@TK2MSFTNGP14.phx.gbl>...
>>>>>>>>>>>>>
>>>>>>>>>>>>>> If your Details button on the Languages tab are correct,
>>>>>>>>>>>>>> Luca, you
>>>>>>>>>>>>>
>>>>>>>>>>>>>> should have Advanced Text Services which includes Tablet PC
>>>>>>>>>>>>>
>>>>>>>>>>>>>> Correction, Tablet PC Correction for Windows Journal and
>>>>>>>>>>>>>> Tablet PC
>>>>>>>>>>>>>
>>>>>>>>>>>>>> Text Insertion. (If you have Office 2003 installed you will
>>>>>>>>>>>>>> also have
>>>>>>>>>>>>>
>>>>>>>>>>>>>> a fourth entry.)
>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>> If that is all proper, try going to the Command Prompt (not
>>>>>>>>>>>>>> Start/Run)
>>>>>>>>>>>>>
>>>>>>>>>>>>>> and enter "regsvr32 inkobj.dll" without the quotation marks,
>>>>>>>>>>>>>> then
>>>>>>>>>>>>>
>>>>>>>>>>>>>> Enter and then
>>>>>>>>>>>>>
>>>>>>>>>>>>>> "regsvr32 tpcps.dll" (without quotes) then Enter again.
>>>>>>>>>>>>>> Restart your
>>>>>>>>>>>>>
>>>>>>>>>>>>>> machine after finishing each of those two modifications to
>>>>>>>>>>>>>> the Registry.
>>>>>>>>>>>>>
>>>>>>>>>>>>>> --
>>>>>>>>>>>>>
>>>>>>>>>>>>>> Chris H.
>>>>>>>>>>>>>
>>>>>>>>>>>>>> Microsoft Windows MVP/Tablet PC
>>>>>>>>>>>>>
>>>>>>>>>>>>>> Tablet Creations - http://nicecreations.us/ Associate Expert
>>>>>>>>>>>>>> Expert
>>>>>>>>>>>>>
>>>>>>>>>>>>>> Zone - www.microsoft.com/windowsxp/expertzone
>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>> "Luca" <keysteal@libero.it> wrote in message
>>>>>>>>>>>>>
>>>>>>>>>>>>>> news:ugHtVz1vEHA.2120@TK2MSFTNGP14.phx.gbl...
>>>>>>>>>>>>>
>>>>>>>>>>>>>> > Hi to all,
>>>>>>>>>>>>>
>>>>>>>>>>>>>> >
>>>>>>>>>>>>>
>>>>>>>>>>>>>> > after installing Service Pack 2, when I click into Input
>>>>>>>>>>>>>> > Panel it
>>>>>>>>>>>>>
>>>>>>>>>>>>>> > appears a system error that says:
>>>>>>>>>>>>>
>>>>>>>>>>>>>> >
>>>>>>>>>>>>>
>>>>>>>>>>>>>> > AppName: Tabtip.exe AppVer: 1.7.200.2180 ModName: ntdll.dll
>>>>>>>>>>>>>
>>>>>>>>>>>>>> > ModVer: 5.1.2600.2180 Offset: 00010370
>>>>>>>>>>>>>
>>>>>>>>>>>>>> >
>>>>>>>>>>>>>
>>>>>>>>>>>>>> > I follow some suggestions on the net, in particular to set
>>>>>>>>>>>>>> > the
>>>>>>>>>>>>>
>>>>>>>>>>>>>> > proper keyboard language (italian), but nothing has changed
>>>>>>>>>>>>>> > and
>>>>>>>>>>>>>
>>>>>>>>>>>>>> > already have this error. I wouldn't uninstall Service Pack
>>>>>>>>>>>>>> > 2, some
>>>>>>>>>>>>>
>>>>>>>>>>>>>> > of Tablet Users have solved this problem?
>>>>>>>>>>>>>
>>>>>>>>>>>>>> >
>>>>>>>>>>>>>
>>>>>>>>>>>>>> > Thank you,
>>>>>>>>>>>>>
>>>>>>>>>>>>>> >
>>>>>>>>>>>>>
>>>>>>>>>>>>>> > - Luca -
>>>>>>>>>>>>>
>>>>>>>>>>>>>> >
>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>
>>>
>>
>>
>
> |