Yes I did it. Probably I must tell you a thing. I installed a MSDN version
of Tablet Xp overwriting
a previous version of Tablet Xp (not MSDN). It could be the reason of this
system error? I don't think as
if I remove Service Pack 2 everything is going well.

"Chris H." <winxpnews********.com> ha scritto nel messaggio
news:eyJ6mcTwEHA.1988@TK2MSFTNGP12.phx.gbl...
> Those are the correct files, according to my installation here. Did you
> run the regsrv32 portion we talked about previously at the Command Prompt
> within that directory?
>
> This was: At the Command Prompt (within the C:\Program Files\Common
> Files\Microsoft Shared\Ink enter "regsvr32 inkobj.dll" without the
> quotation marks, then Enter and then "regsvr32 tpcps.dll" (without quotes)
> then Enter again. Restart your machine after finishing each of those two
> modifications to the Registry.
> --
> Chris H.
> Microsoft Windows MVP/Tablet PC
> Tablet Creations - http://nicecreations.us/
> Associate Expert
> Expert Zone - www.microsoft.com/windowsxp/expertzone
>
>
>
> "Luca" <keysteal@libero.it> wrote in message
> news:uLCYsBTwEHA.2012@TK2MSFTNGP15.phx.gbl...
>> Well Chris,
>>
>> It's a clean installation of Windows Xp Tablet so it's very hard to find
>> it some viruses or adware, by the way
>> I did it and I find two files suspect to be adware (but it was a backup
>> copy of a previous installation). I removed them.
>>
>> These are informations about two files:
>>
>> Inkobj.Dll
>>
>> File Version: 2.7.2600.2180
>>
>> File Version: 2.7.2600.2180 (xpsp_sp2_rtm.040803-2158)
>> Language: English (United States)
>>
>> TcpPs.Dll
>>
>> File Version: 1.0.2201.0
>>
>> File Version: 1.0.2201.0 (xpsp1.020828-1920)
>> Language: English (United States)
>>
>> "Chris H." <winxpnews********.com> ha scritto nel messaggio
>> news:eLPiWxRwEHA.2908@tk2msftngp13.phx.gbl...
>>> Okay, perhaps we should take a wild stab at a different direction.
>>> You're running anti-virus software, correct, with the latest
>>> definitions? If so, please use that to do a thorough check of your
>>> system.
>>>
>>> After you've done that, if you have parasite and Trojan detecting
>>> software available, please update the definitions and then run those.
>>> You may also be interested in the information on parasites and Trojans
>>> here: www.aumha.org/secure.
>>>
>>> With all that out of the way - and the main reason I'm asking you to do
>>> that - I would like you to go into Windows Explorer and locate and
>>> verify the inkobj.dll and tpcps.dll files are in the folder at
>>> C:\Program Files\Common Files\Microsoft Shared\Ink .
>>>
>>> When you find those files, please right-click each of them individually
>>> and select Properties. Then tap the Version tab and in the Item name:
>>> pane tap File Version. Right-click the result in the right pane and
>>> select "Copy." Then paste that information into your response post here
>>> for each of the files.
>>> --
>>> Chris H.
>>> Microsoft Windows MVP/Tablet PC
>>> Tablet Creations - http://nicecreations.us/
>>> Associate Expert
>>> Expert Zone - www.microsoft.com/windowsxp/expertzone
>>>
>>>
>>> "Luca" <keysteal@libero.it> wrote in message
>>> news:O$rhLdRwEHA.3096@TK2MSFTNGP14.phx.gbl...
>>>> Hi Chris (again),
>>>>
>>>> it means that it's as before, so the table input is empty when Windows
>>>> Xp starts, and when I login
>>>> to the system and when I try to run the table input from the icon it
>>>> returns with a system error (ntdll.dll
>>>> and tabtip.exe). So, nothing has changed.
>>>>
>>>> "Chris H." <winxpnews********.com> ha scritto nel messaggio
>>>> news:uaz4koOwEHA.2540@TK2MSFTNGP09.phx.gbl...
>>>>> Luca, I'm only bothered that it isn't working correctly, and trying to
>>>>> help you figure out what's wrong. Not to worry.
>>>>>
>>>>> When you say it "doesn't work" could you give me the exact details of
>>>>> what happened? Did it fail with an error message? Did it not find
>>>>> the files I said to run the Registry fixes on?
>>>>>
>>>>> If I don't have details - (1) I followed your instructions and (2)
>>>>> this is what happened - I have no way of knowing which way to try what
>>>>> next. 8-)
>>>>> --
>>>>> Chris H.
>>>>> Microsoft Windows MVP/Tablet PC
>>>>> Tablet Creations - http://nicecreations.us/
>>>>> Associate Expert
>>>>> Expert Zone - www.microsoft.com/windowsxp/expertzone
>>>>>
>>>>>
>>>>> "Luca" <keysteal@libero.it> wrote in message
>>>>> news:uHz6mkLwEHA.1564@TK2MSFTNGP09.phx.gbl...
>>>>>> Don't be angry Chris, but it doesn't work.
>>>>>> I don't realize what Service Pack 2 Install to not permit the correct
>>>>>> functioning of Tablet Input.
>>>>>>
>>>>>> Let me know,
>>>>>>
>>>>>> - Luca -
>>>>>>
>>>>>> "Chris H." <winxpnews********.com> ha scritto nel messaggio
>>>>>> news:u%23Z0sMGwEHA.2908@tk2msftngp13.phx.gbl...
>>>>>>> Luca, perhaps we should try this: Go to the Command Prompt (you can
>>>>>>> get there by doing "cmd" without the quotes from Start/Run), then
>>>>>>> would you enter "regsvr32 inkobj.dll" without the quotation marks,
>>>>>>> then Enter and then "regsvr32 tpcps.dll" (without quotes) then Enter
>>>>>>> again. Restart your machine after finishing each of those two
>>>>>>> modifications to the Registry.
>>>>>>>
>>>>>>> If this doesn't correct the situation, then I would suggest booting
>>>>>>> into Safe Mode (F8 or the appropriate Tablet button on boot-up) so
>>>>>>> no drivers are loaded, and no programs are running, then do a
>>>>>>> reinstall of Windows XP SP2 and the Tablet PC Edition 2005 over the
>>>>>>> top of what you have.
>>>>>>>
>>>>>>> This will not uninstall or wipe out any of your programs, but make
>>>>>>> sure you've backed up your personal files just in case.
>>>>>>> --
>>>>>>> Chris H.
>>>>>>> Microsoft Windows MVP/Tablet PC
>>>>>>> Tablet Creations - http://nicecreations.us/
>>>>>>> Associate Expert
>>>>>>> Expert Zone - www.microsoft.com/windowsxp/expertzone
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> "Luca" <keysteal@libero.it> wrote in message
>>>>>>> news:%23UAjcZFwEHA.3416@TK2MSFTNGP09.phx.gbl...
>>>>>>>> Hi Chris,
>>>>>>>>
>>>>>>>> When I try to run mscorcfg.msc from Start/Run it simply says that
>>>>>>>> it doesn't
>>>>>>>> find any program with that name. So I must search it throught Hd
>>>>>>>> and run it directly from
>>>>>>>> its directory.
>>>>>>>>
>>>>>>>> I launch the Framework correctly from Administrative Tools.
>>>>>>>>
>>>>>>>> I make a mistake, I mean with appearing that the panel is
>>>>>>>> displaying as a keyboard meanwhile now it's
>>>>>>>> only a window without the keyboard. Empty.
>>>>>>>>
>>>>>>>> "Chris H." <winxpnews********.com> ha scritto nel messaggio
>>>>>>>> news:uK2mpVDwEHA.824@TK2MSFTNGP11.phx.gbl...
>>>>>>>>> We should go step-by-step on this. Are you getting any error
>>>>>>>>> messages when you attempt to start mscorcfg.msc from Start/Run, or
>>>>>>>>> is it just not responding? If you go to Start/Run and put in
>>>>>>>>> "msc" without the quotes, then tap the OK button, does that launch
>>>>>>>>> the Microsoft Management Console without error?
>>>>>>>>>
>>>>>>>>> If you go into Control Panel/Administrative Tools do you see the
>>>>>>>>> Microsoft .NET Framework 1.1 Configuration shortcut in there?
>>>>>>>>> Does it launch properly from that location?
>>>>>>>>>
>>>>>>>>> When you say the Tablet Input Panel "disappeared" could you
>>>>>>>>> describe exactly what you're seeing? Are you saying there is no
>>>>>>>>> icon in the Taskbar area from which to launch the TIP? Are you
>>>>>>>>> saying it doesn't launch when you tap that icon?
>>>>>>>>> --
>>>>>>>>> Chris H.
>>>>>>>>> Microsoft Windows MVP/Tablet PC
>>>>>>>>> Tablet Creations - http://nicecreations.us/
>>>>>>>>> Associate Expert
>>>>>>>>> Expert Zone - www.microsoft.com/windowsxp/expertzone
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> "Luca" <keysteal@libero.it> wrote in message
>>>>>>>>> news:O$KzHxCwEHA.3292@TK2MSFTNGP15.phx.gbl...
>>>>>>>>>> Dear Chris,
>>>>>>>>>>
>>>>>>>>>> thank for you patience. I tried to start mscorcfg.msc from
>>>>>>>>>> Start/Run but it didn't start.
>>>>>>>>>> So I installed .Net 1.1 from Microsoft, and tried again to start
>>>>>>>>>> .msc from Start/Run, but nothing.
>>>>>>>>>> I made a search trought my HD and I found it in
>>>>>>>>>> c:\windows\microsoft .net\etc. After Start it directly from the
>>>>>>>>>> .Net
>>>>>>>>>> folder I find the version 1.1.4322.573.
>>>>>>>>>>
>>>>>>>>>> By the way, after installed the Framework the problem hasn't been
>>>>>>>>>> solved. I de-installed the Service Pack 2 and Tablet
>>>>>>>>>> Input appears again, after re-installing Service Pack 2 it
>>>>>>>>>> disappeared.
>>>>>>>>>>
>>>>>>>>>> Really, I don't understand where it is the problem.
>>>>>>>>>>
>>>>>>>>>> "Chris H." <winxpnews********.com> ha scritto nel messaggio
>>>>>>>>>> news:urqDIk8vEHA.536@TK2MSFTNGP11.phx.gbl...
>>>>>>>>>>> What version of .NET framework do you have installed? If you go
>>>>>>>>>>> to Start/Run and put in "mscorcfg.msc" without the quotes, are
>>>>>>>>>>> you able to access the .NET configuration tools. If you do have
>>>>>>>>>>> .NET installed and this doesn't work, if may be corrupt and need
>>>>>>>>>>> to be updated/reinstalled.
>>>>>>>>>>>
>>>>>>>>>>> If you have an early version installed, the .NET 1.1 Service
>>>>>>>>>>> Pack 1 is available here http://msdn.microsoft.com/netframework/
>>>>>>>>>>> . Look under the Framework Downloads link.
>>>>>>>>>>> --
>>>>>>>>>>> Chris H.
>>>>>>>>>>> Microsoft Windows MVP/Tablet PC
>>>>>>>>>>> Tablet Creations - http://nicecreations.us/
>>>>>>>>>>> Associate Expert
>>>>>>>>>>> Expert Zone - www.microsoft.com/windowsxp/expertzone
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> "Luca" <keysteal@libero.it> wrote in message
>>>>>>>>>>> news:%23y$4dl6vEHA.2804@TK2MSFTNGP14.phx.gbl...
>>>>>>>>>>>> Hi Chris,
>>>>>>>>>>>>
>>>>>>>>>>>> Nothing to do. I re-registered that two dlls, but nothing has
>>>>>>>>>>>> changed. I saw details (in Advaced Text Services), and even if
>>>>>>>>>>>> I have installed Office 2003, I see only that three Services
>>>>>>>>>>>> you described in your last message and not four. I don't
>>>>>>>>>>>> understand what is wrong.
>>>>>>>>>>>>
>>>>>>>>>>>> "Chris H." <winxpnews********.com> ha scritto nel messaggio
>>>>>>>>>>>> news:<Ongvot2vEHA.1300@TK2MSFTNGP14.phx.gbl>...
>>>>>>>>>>>>
>>>>>>>>>>>>> If your Details button on the Languages tab are correct, Luca,
>>>>>>>>>>>>> you
>>>>>>>>>>>>
>>>>>>>>>>>>> should have Advanced Text Services which includes Tablet PC
>>>>>>>>>>>>
>>>>>>>>>>>>> Correction, Tablet PC Correction for Windows Journal and
>>>>>>>>>>>>> Tablet PC
>>>>>>>>>>>>
>>>>>>>>>>>>> Text Insertion. (If you have Office 2003 installed you will
>>>>>>>>>>>>> also have
>>>>>>>>>>>>
>>>>>>>>>>>>> a fourth entry.)
>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>> If that is all proper, try going to the Command Prompt (not
>>>>>>>>>>>>> Start/Run)
>>>>>>>>>>>>
>>>>>>>>>>>>> and enter "regsvr32 inkobj.dll" without the quotation marks,
>>>>>>>>>>>>> then
>>>>>>>>>>>>
>>>>>>>>>>>>> Enter and then
>>>>>>>>>>>>
>>>>>>>>>>>>> "regsvr32 tpcps.dll" (without quotes) then Enter again.
>>>>>>>>>>>>> Restart your
>>>>>>>>>>>>
>>>>>>>>>>>>> machine after finishing each of those two modifications to the
>>>>>>>>>>>>> Registry.
>>>>>>>>>>>>
>>>>>>>>>>>>> --
>>>>>>>>>>>>
>>>>>>>>>>>>> Chris H.
>>>>>>>>>>>>
>>>>>>>>>>>>> Microsoft Windows MVP/Tablet PC
>>>>>>>>>>>>
>>>>>>>>>>>>> Tablet Creations - http://nicecreations.us/ Associate Expert
>>>>>>>>>>>>> Expert
>>>>>>>>>>>>
>>>>>>>>>>>>> Zone - www.microsoft.com/windowsxp/expertzone
>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>> "Luca" <keysteal@libero.it> wrote in message
>>>>>>>>>>>>
>>>>>>>>>>>>> news:ugHtVz1vEHA.2120@TK2MSFTNGP14.phx.gbl...
>>>>>>>>>>>>
>>>>>>>>>>>>> > Hi to all,
>>>>>>>>>>>>
>>>>>>>>>>>>> >
>>>>>>>>>>>>
>>>>>>>>>>>>> > after installing Service Pack 2, when I click into Input
>>>>>>>>>>>>> > Panel it
>>>>>>>>>>>>
>>>>>>>>>>>>> > appears a system error that says:
>>>>>>>>>>>>
>>>>>>>>>>>>> >
>>>>>>>>>>>>
>>>>>>>>>>>>> > AppName: Tabtip.exe AppVer: 1.7.200.2180 ModName: ntdll.dll
>>>>>>>>>>>>
>>>>>>>>>>>>> > ModVer: 5.1.2600.2180 Offset: 00010370
>>>>>>>>>>>>
>>>>>>>>>>>>> >
>>>>>>>>>>>>
>>>>>>>>>>>>> > I follow some suggestions on the net, in particular to set
>>>>>>>>>>>>> > the
>>>>>>>>>>>>
>>>>>>>>>>>>> > proper keyboard language (italian), but nothing has changed
>>>>>>>>>>>>> > and
>>>>>>>>>>>>
>>>>>>>>>>>>> > already have this error. I wouldn't uninstall Service Pack
>>>>>>>>>>>>> > 2, some
>>>>>>>>>>>>
>>>>>>>>>>>>> > of Tablet Users have solved this problem?
>>>>>>>>>>>>
>>>>>>>>>>>>> >
>>>>>>>>>>>>
>>>>>>>>>>>>> > Thank you,
>>>>>>>>>>>>
>>>>>>>>>>>>> >
>>>>>>>>>>>>
>>>>>>>>>>>>> > - Luca -
>>>>>>>>>>>>
>>>>>>>>>>>>> >
>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>
>>>
>>
>>
>
>